+ All Categories
Home > Engineering > Lubrication Engineers SA - General Plus Romania lq

Lubrication Engineers SA - General Plus Romania lq

Date post: 16-Jan-2017
Category:
Upload: nicholas-kominos
View: 187 times
Download: 2 times
Share this document with a friend
69
Bine a( venit la Lubrica(on Engineers SA
Transcript
  • Bine a-( venit la Lubrica(on Engineers SA

  • Cine sintem?

    Producatori de lubrifian( de inalta performanta,servicii de analiza uleiului si solu(i de fiabilitate.

    Specialis( in reducerea costului de intre(nere.

  • Cine sintem?

    Cu sediu in mai mult de 60 de tari.

  • Instala(a bazata in Kansas SUA

  • Sediul interna(onal bazat in Marea Britanie

  • Cine sintem?

  • Care este diferenta principala lu LE,in compara(e cu al(

    producatori de lubrifian(?

  • Studiile arata, ca costul de lubrifian(, reprezenta

    doar 2-3%din totalul cost

    de intre(nere.

  • LE foloseste 100 % ulei de baza parafinica

    ulei de baza sinte(ca

  • LE adauga adi(vi de proprietate unica pentru a reduce frecarea,temperatura,uzura,a creste separa(a apei,adezivitatea,rezistenta la

    caldura,etc.

  • Almasol Monolec Duolec Quinplex

    DUOLEC is the newest LE proprietary additive incorporating revolutionary technology designed specifically for use in LE gear lubricants. It is a temperature activated, dual acting, liquid additive that imparts special properties and synergies to the LE Products in which it is used. DUOLEC increases lubricant film strength and protects metal surfaces outperforming at

    Under normal to light conditions of speed and load, two metal surfaces are effectively separated by a lubricant film. This is known as hydrodynamic lubrication. An increase in load or a decrease in speed reduces the lubricant film allowing metal to metal contact and raising the temperature of the contact zone due to frictional heat. As a result, the EHD and mixed film antiwear components of DUOLEC

  • Solid Additive

    Almasol

    Maximum Service

    Temperature

    1,038C (1,900F) 400,000 psi(28,123 kgf/cm)

    Inert None

    MolybdenumDisulfide

    343C (650F) 400,000 psi(28,123 kgf/cm)

    Some Oxidizes in air above 343C (650F), forming abrasive molybdenum trioxide. Tendency to build up on itself, affecting machinery with close tolerances. Cannot tolerate hydrochloric and nitric acid, especially when heat, water and air are present.

    Graphite 426C (800F) 80,000 psi(5,625 kgf/cm)

    Some Known to exhibit galvanic corrosion problems. Tendency to build up on itself, affecting machinery with close tolerances.

    Fluorocarbon (PTFE)

    260C (500F) 5,000 psi (352 kgf/cm)

    Inert No load-carrying capability. Tendency to build up on itself, affecting machinery with close tolerances.

    Load Carrying Capacity

    Acid Resistance

    Drawbacks When Used in Industrial Lubricants

    A

    B

    C

    DEMO

  • Quinplex

    1

    2

    3

    4

    5

    Water Resistance

    Tackiness

    Cohesion

    Mechanical Stability

    Corrosion Resistance

    BEFORE AFTER

  • Quinplex Demonstra(e

    Test de impact Separa(a Apei

  • Cu(e de viteze-Demonstra(e

  • Servicii de analiza uleiului

    ''''''Lubrica@on'Engineers'Hellas

    Lubrica(on+Engineers+Leaders+in+lubricants

    www.le9greece.gr++30+210+5152+040

    ''''''''':'

    1)######2)######3)###.

    ':+:++(Fe),+M+(Pb)+X+(Cu)+,++(Cr),++(Mo)+,++(l),++(Ni)+,++(Ag),++(Sn)+..+

    +++++++++.+++++++++++++.+H++++++++,+++++++++++.

    '(P),''(n),''(Ca),''(),''(Mg):++++++++++++++++++++++++.++++++++++++,+++,+++++++++++.++++++++++,+++++++++++++++.+++++++++++++++++++.

    '()',''(),''():+++++++++++.++++++++++++++++++++++.+++,+,++++++++++++.

    '(Si'b'Silica):++,++,++++++++++++"".++++++++++++.+++(silicone)++++++++.

    ''''''Lubrica@on'Engineers'Hellas

    Lubrica(on+Engineers+Leaders+in+lubricants

    www.le9greece.gr++30+210+5152+040

  • Audituri si inspec(i

    &

    &

    1 2 3 4 5 6 7 8 9 10 11 12*

    &

    &

    1 2 3 4 5 6 7 8 9 10 11 12*

    &

    13/03/13 12:22 46 49 42 43 40 44 43 48 43 31 110

    *&&12&:&&&&::&263/&270&&pitch&line

    &

    &:&:&:&:&:&:

    &&&&

    LubricaRon&Engineers&Hellas&Leaders&in&lubricants

    www.le/greece.gr&+30&210&5152&040

    :&Kluber&CF&3

    &&

    LubricaRon&Engineers&Hellas&Leaders&in&lubricants

    www.le/greece.gr&+30&210&5152&040

    38,0

    39,3

    40,7

    42,0

    43,3

    44,7

    46,0

    3 4 5 6 7

  • Viper Mk II WRL Key Components

    Viper Lube Pump Kit

    Viper Seals

    Viper Collar (seals & scrapers

    in place)

    Ungere de frangie

  • Oil Spill Eater II (OSE II)este procesul cel mai sigur din lume pentru mediu si bioremedierea rentabila pentru atenuarea deseulirol periculoase,scurgerilor si contaminari prac(c oriunde si de orice dimensiune,mari sau mici.

  • Cine sintem - Video

  • Sfarsitul sec(ei 1

  • Sec(a 2 Exemple de aplica(i

    Opera(uni live

  • Opera(une live de la o cu(e de viteze

  • Ungere de unelte

    Duolec 1601-1609 avantaje puternice Cel mai mareFZG A/8,3/90 Etapa sa trecut cu 14 Aprovizionare buna de lubrifian( pentru

    filmul de lubrifiere,la(me de film mai mare,mai pu(na frecare Prelungirea vie( cu(ei de viteze Reducerea temperaturi de operare Intervale mult mai mari de schimbare a

    uleiului Fara spumare

  • Ungere de unelte live

  • Ungere de unelte live

  • Ungere de Unelte live

    Pyroshield 9011 resulate Consumul zilnic cu lubrifiantul precedent:2,8Kg Consumul zilnic cu Pyroshield 9011: 1,2 Kg

    57%reducere

    9oC reducerea temperaturi de pinion

  • Ungere de Unelte - Vindecare

    Unelte pinion inainte de a folosi Pyroshield Unelte pinion dupa 21 luni cu Pyroshield

    Vindecare Unelte- Reducere de corodare

    Reducerea vibra(ilor

    87% reducerea lubrifian(lor

  • Ungere de Unelte- Vindecare

  • Ungere de Unelte

  • Ungere de UnelteOil Life

    0

    12.500

    25.000

    37.500

    50.000

    Jan 2006 Jul 2006 Jan 2007 Jun 2007 Dec 2007 Jul 2008 May 2009 Dec 2009 Mar 2013

    Oil life (hrs) esRmaRon

    Duolec 1606 datele de la 20 de cuRi de viteze Analiza de ulei (AES) monitorizare Con(nua crestere mediei de viata a uleiului instalat Opera(i de ulei de peste 7 ani in mai multe unita(

  • Ungere Unelte

    0,0000

    0,0070

    0,0140

    0,0210

    0,0280

    Jan 2006 Jul 2006 Jan 2007 Jun 2007 Dec 2007 Jul 2008 May 2009 Dec 2009 Mar 2013

    Cost of 1lt euro/day

    Duolec 1606 datele de la 20 de cuRi de viteze Scaderea con(nua a costurilor de u(lizare a

    lubrifian(lor

  • Ochelari de vederea uleiului

  • Opera(e de rulment

  • Lubrifiere de ax-Rulmen( de fric(une

  • Lubrifiere de ax-Rulmen( de fric(une

  • Ungere de compresor de aer

  • Ungere de compresor de aer

  • Compresor de Aer-Reducerea Energiei

    Atlas Copco GA 132 Average Amps with load Ambient Temp.

    Previous lubricant 260 28 C

    Mul(lec 6802 241 21 C

    % Reduc(on -7,3%

  • Ungerea Suflantului

    0

    10.000

    20.000

    30.000

    40.000

    Jan 2006 Jul 2006 Jan 2007 Jun 2007 Dec 2007 Jul 2008 May 2009 Dec 2009 Mar 2013

    Oil life (hrs) esRmaRon

  • LE SA Client de mai mult de 20 ani

  • IHI 2 Laminare la receCapacitatea unei principale cuti de viteze:

    2.000 ltLubricant: Almasol 605Viata uleiului> 10 ani

  • Aplica(i de temperatura foarte inalta

  • Ungere de cabluri la macara aeriana

  • Ungere de cabluri la macara aeriana

  • Media viata a uleiului de motor > 1.500 hrsMedia viata a uleiului de transmisie> 6.000

    hrs

  • Un (p de unsoare pentru toate aplica(ile

    Motoare Electrice Ungere de rulmen( Ungere de Ax Lubrifiere de Pin si Bush Lubrifiere de vehicole Lubrifiere de macara

  • Duolec Gear Oil Series & Oil Analysis

  • Almasol 680 ulei de transmisie Proiectat pentru unelte de bronz

  • Ball & Rod Mill Lubrifiere

  • Ball & Rod Mill Lubrifiere

  • Ball & Rod Mill Lubrifiere

  • Ball & Rod Mill Lubrifiere

  • Ball & Rod Mill Lubrifiere

    &

    &

    1 2 3 4 5 6 7 8 9 10 11 12*

    *""12":""""

    ::"313"A"320

    "&

    &:&4.224&mm

    &:&480&mm

    &:&507&mm

    &:&480&mm

    &:&19&rpm

    &:&158&rpm

    &&&&

    LubricaNon"Engineers"Hellas"

    Leaders"in"lubricantswww.leAgreece.gr"

    +30"210"5152"040

    :&Pyroshield&9011

    &

    &

    1 2 3 4 5 6 7 8 9 10 11 12*

    FL3 24/10/06 11:05 36,0 41,0 41,0 43,0 44,0 42,0 40,0 40,0 42,0 25,0 22,0

    FL3 23/10/08 11:00 27,0 28,2 29,5 32,5 30,8 27,2 24,0 22,0 17,0

    FL3 16/12/10 10:05 22,5 27,0 26,0 28,0 30,0 30,8 29,3 29,6 35,5 5,0

    FL3 15/5/13 11:10 """"""""""""

    FL3&d&&&

    LubricaNon"Engineers"Hellas"Leaders"in"lubricants

    www.leAgreece.gr"+30"210"5152"040

    10,0

    15,0

    20,0

    25,0

    30,0

    35,0

    40,0

    45,0

    50,0

    3 4 5 6 7T"oC

    2006 2008 2010

  • Ungerea compresorului de electroliza a macaralelor

    aeriene

  • Ungere de cabluri

  • Ungere de Cabluri

  • Ungere de Cabluri

  • Ungerea flotei de vehicule

    Media viata uleiului de motor > 2.000 hrs

  • The Lubrication Reliability Source

    www.LElubricants.com 800-537-7683 [email protected] Bailey Avenue Fort Worth, TX 76107 Fax: 800-228-1142

    LE operates under an ISO 9001 Certified Quality System.

    Do More with LEss

    LEs Duolec gear oil clings to gears for nonstop protection.

    If you would like to experience LEss downtime, visit

    www.LElubricants.com to learn more about Duolec

    Vari-Purpose Gear Lubricant and LEs reliability solutions.

    Say good riddance to inferior oil that robs your gearboxes of performance. Save time and money with LEs superior Duolec Vari-Purpose Gear Lubricant. This proven performer features LEs

    proprietary additive technology, which creates a dual layer of anti-wear and EP protection. In high temps,

    Duolec remains thermally stable, resists oxidation, and wont create sludge or varnish. It maintains film

    strength, clings tenaciously to metal and readily separates from water. To experience more

    performance, less wear and less equipment downtime, go with Duolec!

    D U O L E C C A N T B E B E AT

    F O R 2 4 / 7 G E A R P R O T E C T I O N !

    Duolec Vari-Purpose Lubricant

    features LEs proprietary

    additive technology, the

    backbone of the lubricant.

    LE is your one-stop shop for

    lubrication reliability solutions,

    including breathers and sight

    glasses.

    LEAP oil analysis monitors oil

    condition to ensure

    long-lasting gearbox reliability.

    Thank you!

    The Lubrication Reliability Source

    www.LElubricants.com 800-537-7683 [email protected] Bailey Avenue Fort Worth, TX 76107 Fax: 800-228-1142LE operates under an ISO 9001 Certified Quality System.

    Do More With LEssI N C R E A S E U P T I M E & P R O F I T S W I T H L U B R I C AT I O N R E L I A B I L I T Y P R O G R A M

    L U B R I C A N T S

    R E L I A B I L I T Y

    S U P P O R T & S E R V I C E

    Switching to high-performance lubricants can save you time, energy and

    money. LE manufactures a full line of industrial oils and greases that are

    formulated for the targeted application using highly refined or synthetic base

    oils blended with proprietary additives. LE lubricants last longer and protect

    equipment far better than ordinary lubricants. This means less equipment

    failure, less need for lube changeovers, and less PM activity, all of which adds

    up to more uptime and profits for you. | www.LElubricants/lubricants.html

    Much more than a lubricant supplier, LE is a one-stop shop offering lubrication

    reliability solutions. LE can help you with a custom program including oil

    analysis, breathers, sight glasses, filtration carts, lubricant storage and more

    whatever you need to keep your lubricants clean and dry. Less contamination

    means more reliability. | www.LElubricants.com/reliability-solutions.html

    Last but not least, LEs trained and certified consultants are onsite with you to

    educate, plan and assist. Our Technical Services team is also available to

    help. Short on staff? Lack of knowledge? No worries. You can do more with

    LEss. | www.LElubricants.com/implementation.html


Recommended