Curriculum vitae Europassmecanica.ucv.ro/ProgrameStudii/Doctorat/Conducatori... · Facultatea de...

Pagina / - Curriculum vitae al Benga gabriel Constantin

Pentru mai multe informaţii despre Europass accesaţi pagina: http://europass.cedefop.europa.eu © Comunităţile Europene, 2003 20060628

Curriculum vitae Europass

Informaţii personale

Nume / Prenume Benga, Gabriel Constantin

Adresă Str. CALUGARENI NR.1, DROBETA TURNU SEVERIN, 220037, MEHEDINTI, ROMANIA

Telefon(oane) +40.0252.333.431 Mobil: +40.723.510.286

Fax(uri) +40.0252.317.219

E-mail(uri) [email protected] ; [email protected]

Naţionalitate română

Data naşterii 24 septembrie 1967

Sex masculin

Experienţa profesională

Perioada 2011 – prezent

Funcţia sau postul ocupat Profesor universitar

Activităţi şi responsabilităţi principale

Activitate academica (cursuri la ciclul de licenta -Tehnologii de fabricatie, Bazele aschierii suprafetelor si scule aschietoare, Tolerante si control dimensional, la ciclul master- Sisteme de standarde in domeniul calitatii, Ecodesign, Managementul sistemelor logistice), activitate de cercetare

Numele şi adresa angajatorului Facultatea de Mecanica, Departamentul de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, Universitatea din Craiova, Romania

Tipul activităţii sau sectorul de activitate

Invatamant superior

Perioada 2007 – 2011

Funcţia sau postul ocupat Profesor universitar


Activitate academica (cursuri la ciclul de licenta -Tehnologii de fabricatie, Bazele aschierii suprafetelor si scule aschietoare, Tolerante si control dimensional, la ciclul master – Microprelucrari), activitate de cercetare

Numele şi adresa angajatorului Facultatea de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, Universitatea din Craiova, Romania


Invatamant superior

Perioada 2003 –2007

Funcţia sau postul ocupat Conferentiar universitar




Activitate academica

academica (cursuri la ciclul de licenta -Tehnologii de fabricatie, Bazele aschierii suprafetelor si scule aschietoare, Tolerante si control dimensional)



Invatamant superior

Perioada 1999-2003

Funcţia sau postul ocupat Sef de lucrari


Activitate academica (cursuri la ciclul de licenta -Tehnologii de fabricatie, Bazele aschierii suprafetelor si scule aschietoare, Tolerante si control dimensional)

Numele şi adresa angajatorului Colegiul Universitar Dr. TR. Severin, Universitatea din Craiova, Romania

Perioada 1997-1999

Funcţia sau postul ocupat Asistent universitar


Activitate academica (laboratoare la disciplinele: Tehnologii de fabricatie, Bazele aschierii suprafetelor si scule aschietoare, Tolerante si control dimensional)



Invatamant superior

Perioada 1995-1997

Funcţia sau postul ocupat Preparator universitar


Activitate academica (laboratoare la disciplinele: Tehnologii de fabricatie, Bazele aschierii suprafetelor si scule aschietoare, Tolerante si control dimensional)



Invatamant superior

Perioada 1992-1995

Funcţia sau postul ocupat Inginer


Monitorizarea productiei la Sectia de Prelucrari Mecanice

Numele şi adresa angajatorului S.C. Mecanoenergetica S.A., Drobeta Tr. Severin, Romania


Urmarirea productiei in domeniul reconditionarii reperelor la utilajele folosite in industria energetica

Perioada 2011-2016

Funcţia sau postul ocupat Director Departament


Activitate management universitar

Numele şi adresa angajatorului Facultatea de Mecanica, Departamentul de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, Universitatea din Craiova, Romania


Invatamant superior

Perioada 2008 -2011

Funcţia sau postul ocupat Prodecan cu Calitatea Invatamantului







Invatamant superior

Perioada 2006-2007

Funcţia sau postul ocupat Sef de catedra Stiinte Aplicate



Numele şi adresa angajatorului Facultatea de Ingineria si Managementul Sistemelor Tehnologice din Drobeta Turnu Severin a Universitatii din Craiova


Invatamant superior

Perioada 2002 – 2004

Funcţia sau postul ocupat Secretar stiintific





Invatamant superior

Perioada 1995 - prezent

Funcţia sau postul ocupat Director si membru in colective de cercetare stiintifica:

- 11 proiecte cu finantare internationala (H2020, FP7, FP6, SEE, TEN-T, MOVE, Erasmus+, INTERREG), 6 director/responsabil, 5 membru in echipa

- 12 proiecte cu finantare nationala (CEEX, PN III, PN II, CNCSIS, mediul socio-economic), 1 director, 11 membru in echipa


Activitate de cercetare stiintifica

Numele şi adresa angajatorului Universitatea din Craiova


Invatamant superior



Autor si co-autor articole - 66 ( 11- ISI/ISI Proceedings, 11- BDI, 44 - reviste (R)/ proceedings (P) naționale / internaționale neindexate), autor si co-autor carti - 7 (indrumare laborator/proiect - 2, cursuri universitare - 3, carti de specialitate - 2 , citari in reviste cotate ISI - 88, citari in SCOPUS - 118

Numele şi adresa angajatorului Universitatea din Craiova


Publicare articole si carti



Referent stiintific, evaluator stiintific



- referent stiintific la revista: Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B – revista cotata ISI

- referent stiintific la revista Journal of Computational Design and Engineering –revista cotata ISI

- editor la Advanced Engineering Forum, vol 13, 2014 - Referent stiintific la Conferinta ICOME, 2015-2017 - evaluator stiintific pentru proiecte CNCSIS, CEEX - DAAAM International Review Committee , 2009-2016



- evaluator ARACIS 2011-prezent

Educaţie şi formare

Perioada 2009-2010

Calificarea / diploma obţinută Managementul organizatiilor Publice/ Diploma de Master

Numele şi tipul instituţiei de învăţământ / furnizorului de formare

Universitatea din Craiova/ Facultatea de Economie si Administrarea Afacerilor

Perioada 2003-2004

Calificarea / diploma obţinută Mircroprelucrari si optimizarea proceselor de productie/ Diploma de studii postdoctorale


McMaster University, Hamilton, Ontario, Canada

Perioada 2001-2005

Calificarea / diploma obţinută Specializarea: Management / Diploma de licenta


Facultatea de Stiinte Economice, Universitatea din Craiova, Romania

Perioada 2002

Calificarea / diploma obţinută Inginerie Industriala/ Diploma de doctor in stiinte

Disciplinele principale studiate / competenţe profesionale dobândite

Titlul tezei de doctorat: Contribuţii la optimizarea procesului tehnologic privind prelucrarea în stare dură a oţelurilor aliate: prof.dr.ing. Vasile Popovici


Facultatea de Mecanica, Universitatea „Politehnica” din Timisoara, Romania

Perioada 2000

Calificarea / diploma obţinută Specializarea: Prelucrarea prin aschiere a materialelor cu duritate mare


Universidade Federal de Minas Gerais, Belo Horizonte, Brazilia

Perioada 1987-1992

Calificarea / diploma obţinută Inginer, specializarea: Tehnologia constructiilor de masini/ Diploma de Inginer


Facultatea de Mecanica, Universitatea din Craiova, Romania,

Perioada 1982-1986

Calificarea / diploma obţinută Diploma bacalaureat


Liceul Ind. Nr 4, Drobeta Turnu Severin, Romania

Aptitudini şi competenţe personale

Limba(i) străină(e) cunoscută(e)

Limba engleza

Limba franceza

Intelegere Vorbire Scriere Ascultare Citire Participare la conversaţie Discurs oral Exprimare scrisă

C1

C1 C1 C2 C1

B1 A2 A2 A2 A1

Competenţe şi aptitudini organizatorice

Competenta manageriala dobandita prin specializarile obtinute si prin activitatile manageriale desfasurate, enumerate mai sus

Competenţe şi aptitudini tehnice Prelucrari mecanice, Optimizarea proceselor tehnologice de prelucrare mecanica, Microprelucrari, Modalitati de utilizare a noi combustibili pentru motoarele termice, (LNG), Transportul pe ape interioare, conform specializărilor dobândite

Competenţe şi aptitudini de utilizare a calculatorului

Da

Anexe Anexa CV – participari programe internationale, apartenenta la societati stiintifice si profesionale, premii, brevete, alte activitati profesionale

Anexa CV Benga Gabriel

Activitati de cercetare:

� Proiecte internationale de cercetare

1 Proiect de cercetare MMRI-1064-03-F intre McMaster Manufacturing Research Institute, Hamilton, Ontario, Canada and Siemens Westinghouse Ltd., Canada, intitulat: “Transition Machining Process Development” project manager of the research team as a postdoctoral fellow at McMaster University during 10.06.2003/10.06.2004, buget MMRI 55000 CAD 2 Proiect de cercetare MMRI-1068-07-F between McMaster Manufacturing Research Institute, Hamilton, Ontario, Canada and Exactatherm Ltd., Ontario, Canada, intitulat: “ Assesement of the quality of coatings”, member of the research team as a postdoctoral fellow at McMaster University during 10.06.2003/10.06.2004, budget MMRI 15000 CAD.

� Programul Horizont 2020

Call: H2020-MG-2014, SEP-210181740 Promoting Innovation in the Inland Waterways Transport Sector, Acronym PROMINENT, coordinator STICHTING STC-GROUP, Netherlands, partner Universitatea din Craiova, Facultatea de Mecanica, Departamentul IMST, manager proiect din partea Universitatea din Craiova prof.dr.ing. Benga Gabriel, 2015-2018, buget UCV 58260 eur.

� Grant International DG Move No. MOVE/B3/SER/2015-224/SI 2.721484 - Study on support measures for the implementation of the TEN-T core network related to sea ports, inland ports and inland waterway transport. Lot 1: Assessment of potential of maritime and inland ports and inland waterways and of related policy measures, coordinator Ernst&Young, France, partener Universitatea din Craiova, Facultatea de Mecanica, Departamentul IMST, manager de proiect din partea Universitatea din Craiova, prof.dr.ing. Benga Gabriel, 2016-2017, budget UCV 56750 eur.

� Programul TEN-T

2012-EU-18067-S- LNG Masterplan for Rhine-Main-Danube, acronym LNG, coordinator Pro Danube Management GmbH, Austria, partner Universitatea din Craiova, Facultatea de Mecanica, manager de proiect din partea Universitatea din Craiova, prof.dr.ing. Benga Gabriel, 2012-2015, budget Univ Craiova 31400 eur. http://www.lngmasterplan.eu/

� Programul INTERREG, Danube Transnational Programme, Seed for Money Facility

DTP-SMF1-95 Trasnational Cooperation in Higher Education in the Danube Region, acronim EDUMARKT, coordonator Universitatea din Craiova, Facultatea de Mecanica, manager proiect prof.dr.ing. Benga Gabriel, 2018-2019, buget Universitatea din Craiova 30000 euro.

� Programul South East Europe

SEE AF/A/223/3.2/X: Cooperation - Network for logistics and nautical education focusing on Inland Waterway Transport in the Danube corridor supported by innovative solutions, acronym NELI, coordinator CERONAV Constanta, partener Universitatea din Craiova, Facultatea Ingineria si Managementul Sistemelor Tehnologice, membru in echipa de cercetare, 2009-2012 http://www.neliproject.eu/neli/

SEE AF/A/ 5108416 Harmonized Inland Navigation Transport through education and information technology, acronym HINT, coordinator coordinator CERONAV Constanta, partener Universitatea din Craiova. Facultatea de Mecanica, Departamentul Ingineria si Managementul Sistemelor Tehnologice, membru in echipa de cercetare, 2012-2014 http://www.hintproject.net/

� Programul ERASMUS PLUS

Proiect nr. 2016-1-NL01-KA202-022981 - Competency Based Inland Waterway Transport Education & Training, acronym IWTCOMP, coordinator STC. Netherlands, manager de proiect din partea Universitatea din Craiova, prof.dr.ing. Benga Gabriel, 2016-2019, budget UCV 14139 euro.

Proiect nr. 2018-1-RO01-KA202-049371 – Logistics technologist (LOT) – new harminized qualification to

unify, regulate and optimize in an innovative concept the disparate logistics activities from a fabrication

system, acronym LOGIN, coordinator Universitatea din Craiova, 2018-2020, director proiect conf.dr.ing.

Danut Savu, membru in echipa de implementare

� Programul FP7

Framework Project 7 (FP7)- FP 7 218362-2008, Platform for the implementation of NAIADES, acronym PLATINA, beneficiar Comisia Europeana, coordinator proiect: Via Donau – Osterreichische Wasserstraen-Gesellschaft mbH, Austria, partener Universitatea din Craiova, Facultatea de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, membru in echipa de cercetare, 2008-2012.

� Programul FP6 1 Framework Project 6 (FP6), FP6-013908/2005-2007, beneficiar Comisia Europeana;

coordinator proiect: Chalex Ltd., U.K.; partener: partener Universitatea din Craiova, Facultatea de Ingineria si Managementul Sistemelor Tehnologice, Drobeta Turnu Severin, membru in echipa de cercetare, 2005-2007. (www.impart-nanotox.org)

� Granturi narionale de cercetare – Cercetare de excelenta CEEX

1. Grant de cercetare CERCETARE DE EXCELENTA (CEEX) nr. C85/2006, beneficiar: Ministerul Educatiei si Cercetarii ; coordonator: Universitatea din Craiova, Facultatea de Ingineria si Managementul Sistemelor Tehnologice din Drobeta Turnu Severin; director proiect: prof.dr.ing. Mangra Mihail; titlu: Dezvoltarea cunoasterii asupra elaborarii si microprocesarii prin metalurgia pulberilor a materialelor nanostructurate pentru componente MEMS; acronim: PRONANOMAT (membru in colectivul de cercetare); durata finantarii: 2006-2008 (www.imst.ro)

2. Grant de cercetare CERCETARE DE EXCELENTA (CEEX) 2006, beneficiar: Ministerul Educatiei si Cercetarii; coordonator: Institutul National de Cercetare - Dezvoltare in Sudura si Incercari de Materiale - ISIM Timisoara; partener: Universitatea din Craiova, Facultatea de Ingineria si Managementul Sistemelor Tehnologice din Drobeta Turnu Severin; coordonator parteneriat: prof.dr.ing. Mangra Mihail; titlu: Microstraturi plurifunctionalizate pentru acoperirea aliajelor de titan prin tehnologii avansate); acronim: MICROFUNCTIA (membru in colectivul de cercetare); durata finantarii: 2006-2008 (www.isim.ro)

3. Grant de cercetare CERCETARE DE EXCELENTA (CEEX) 2006, beneficiar: Ministerul Educatiei si Cercetarii; coordonator: Institutul National de Cercetare - Dezvoltare in Sudura si Incercari de Materiale - ISIM Timisoara; partener: Universitatea din Craiova, Facultatea de Ingineria si Managementul Sistemelor Tehnologice din Drobeta Turnu Severin; coordonator parteneriat: prof.dr.ing. Mangra Mihail; titlu: Centrul virtual pentru tehnologii integrate cu aplicatii ale energiei electroultraacustice in ingineria materialelor avansate; acronim: ULTRATECH;( membru in colectivul de cercetare) durata finantarii: 2006-2008 (www.isim.ro)

� Contracte Nationale de Cercetare

1. PN-III-P1-1.2-PCCDI-2017-0875 Proiecte complexe realizate în consorţii CDI (PCCDI), SISTEME DE

PROTECTIE COLECTIVA PENTRU DOMENIUL MILITAR REALIZATE DIN ALIAJE CU ENTROPIE

RIDICATA DIN SISTEMUL AlCrFeMnNi MICROALIATE CU Ti, Zr, Hf, Y - HEAPROT, coordinator Institutul de Cercetare Dezvoltare pentru Metale Neferoase si Rare-IMNR, partener Univ din Craiova, Fac. De Mecanica, (membru in colectivul de cercetare), resposabil parteneriat Univ. din Craiova, conf.dr.ing. Savu Danut.

2. PN-III-P2-2.1-CI-2017 – contract 87CI ⁄ 2017 - Optimizarea elementelor constructive ale sistemelor de protecție și comutație electrică în vederea îmbunătățirii duratei de viață a produsului, director proiect conf.dr.ing. Savu Sorin

3. Contract PN II, 90C/5.12.2007, Program Resurse Umane, Proiect tip MC-Mobilitate Cercetatori, titlu: „Wear patterns of polycrystalline cubic boron nitride cutting tools when machining hardened bearing steel”, 2007, director de proiect.

4. Contract nr. 3C/486c/1994-1996, tema B, “Procedee tehnologice şi sisteme de prelucare a oţelurilor înalt

aliate a aliajelor de titan şi a oţelurilor cu duritatea peste 62 HRC” (membru in colectivul de cercetare) Beneficiar: Ministerul Cercetării şi Tehnologiei, Direcţia Generală Resurse, Unităţi şi Institute de Cercetare Dezvoltare

5. Contract nr. 798B/68c/1996, tema A4, “Procedee tehnologice de obţinere a elementelor aşchietoare din

materiale ceramice oxidice pe bază de bariu şi stronţiu” (membru in colectivul de cercetare) Beneficiar: Ministerul Cercetării şi Tehnologiei Generală Resurse, Unităţi şi Institute de Cercetare

Dezvoltare

6. Contract C.N.C.S.I.S. cod 3253/2001,cod 16, “Studii asupra mecanismului SPS la elaborarea unor magneţi ceramici anizotropi” (membru in colectivul de cercetare)

7. Contract de cercetare ştiinţifică nr. 7191/30.05.2002, “Soluţii tehnologice şi economice privind

amenajarea depozitului ecologic de deşeuri menajere din zona municipiului Dr.Tr. Severin”(membru in colectivul de cercetare).

Executant: Universitatea din Craiova. Beneficiar: Primăria municipiului Dr. Tr. Severin.

8. Contract de cercetare ştiinţifică nr. 3770/11.03.2002, “Studiu privind impactul ecologic şi evaluarea

soluţiilor tehnologice privind epurarea apei menajere din zona municipiului Dr.Tr. Severin”(membru in colectivul de cercetare). Executant: Universitatea din Craiova

Beneficiar: Primăria municipiului Dr. Tr. Severin

9. Contract de cercetare ştiinţifică nr. 10701/27.11.2002, “Implicaţiile tehnico-economice ale utilizării raţionale a sistemelor de distribuţie a agentului termic la R.A. Lotus”(membru in colectivul de cercetare). Executant: Universitatea din Craiova Beneficiar: Regia autonomă “Lotus “ Drobeta Turnu Severin

Apartenenţa la societăţi ştiinţifice şi profesionale, premii, nominalizări

1. Education in Inland Navigation EDINNA, membru (2009), membru in Board ca Advisory Officer

(2015)

2. Asociatia Managerilor si a Inginerilor Economisti din Romania AMIER, membru, (2008)

3. Working Group of Micro-and Nanomanufacturing - Fraunhofer, IPMA, membru, (2006)

4. Asociaţia Generală a Inginerilor din Romania, A.G.I.R., Vicepresedinte la filiala Dr. Tr. Severin

(2004);

5. Asociaţia Română de Tehnologii Neconvenţionale, A.R.T.N., membru, (1999);

Cărţi, capitole de carti, cursuri si indrumare

1. Gabriel Benga, Tolerante si control dimensional, Tipografia Universitatii din Craiova, 2017.

2. Gabriel Benga, Tehnologii de fabricatie, Indrumar de proiectare, Tipografia Universitatii din

Craiova, 2017.

3. Gabriel Benga, Alexandru Stanimir – Tehnologii de prelucrare si montaj Vol I, Bazele proiectarii

tehnologiilor de prelucrare, Editura Universitaria, Craiova, ISBN 978-973-742-576-8; ISBN 978-

973-742 577-5, 286 pg, 2007.

4. Gabriel Benga, Filip Ciolacu – Prelucrari mecanice si control dimensional, Editura Universitaria,

Craiova, ISBN 973-8043-277-7, 272 pg., 2003.

5. Filip Ciolacu, Nicolaie Craciunoiu, Gabriel Benga – Aschiere si procedee de prelucrare,

Reprografia Universitatii din Craiova, 225 pg. 2003.

6. Gabriel Benga – Aschierea materialelor cu duritate mare – cercetari teoretice si experimentale,

Editura Universitaria, Craiova, ISBN 973-8043-198-7, 360 pg. 2002.

7. Alexandru Stanimir, Gabriel Benga, Cherciu Mirela – Tolerante si control dimensional- Indrumar

de laborator, Reprografia Universitatii din Craiova, 100 pg, 1998.

Publicaţii:

1. S. V. SAVU, I. D. SAVU, G. C. BENGA, Integration of welding simulation as digital training tool into Industry 4.0 fabrication processes, Sudarea si Incercarea Materialelor, BID-ISIM, 3/2018.

2. I. D. SAVU, S. V. SAVU, G. C. BENGA, Evolution of the thermal field at microwave heating of metals and ceramics materials, BID-ISIM, 3/2018.

3. Savu, S. V., Benga, G. C., Ciupitu, I., & Olei, B. A. (2018). Competencies for Inland Navigation Crew of LNG-Fueled Ships. In Advanced Engineering Forum (Vol. 27, pp. 248-253). Trans Tech Publications, 2018. (EBSCO Database)

4. S. V. SAVU, I. D. SAVU, G. C. BENGA, I. CIUPITU, Study of functional characteristics of the hybrid US-laser bonds, Optoelectronics and Advanced Materials-Rapid Communications, Vol. 11, No. 9-10, September-October, 2017, p.580-585.(ISI Journal, impact factor 0.47)

5. S. V. SAVU, I. D. SAVU, G. C. BENGA, I. CIUPITU, Improving functionality of Ti6Al4V by laser technology surfacing, Optoelectronics and Advanced Materials-Rapid Communications, Vol 10 ISS. 9-10 2016, pp. 752-760, 2016 (ISI Journal, impact factor 0.47)

6. Savu, S. V.; Savu, I. D.; Benga, G. C., Heat Affected Zone in Microwave Polymer Welding, Advanced Materials Research 2016,Vol.1138,p165-171. (EBSCO Database)

7. C. I. Pascu, O. Gingu, N. Lupu, G. Benga, I. Vida-Simiti, "Research about the Quality of Bulk Titanium Materials Obtained by Powder Metallurgy Technology from Titanium Hydride Powder Used for Automotive Components", Applied Mechanics and Materials, Vol. 822, pp. 418-428, 2016 (EBSCO Database)

8. S.V. Savu, I. Ciupitu, N.A. Sîrbu, I.D. Savu, G.C. Benga Microwave-resistive hybrid thermal source for soldering alloys and metal-ceramics composites /Sursă termică hibridă microunde-rezistiv pentru lipirea aliajelor metalice și a compozitelor metal ceramică ,BID-ISIM, 3/2016. Pp 6-8 (CSA-Technology Research Database)

9. G. Benga, D. Savu, A. Olei Influence of cutting parameters on the surface roughness when machining hardened steel with ceramic and PCBN cutting tools, Advanced Engineering Forum, vol 13, pp. 19-22, Jun. 2015, DOI 10.4028/www.scientific.net/AEF.13.19 (EBSCO Database)

10. Gingu, O., Harabor, A., Rotaru P., Pascu, I., Ciupitu, I., Benga, G.C., Sima, G., Olei, A, Influence of two steps sintering parameters on tribological behaviour of hybrid hydroxyapatite-based biocomposites, J.Adv.Therm.Sci.Res, vol.1, no.2, 2015. (Crossref database)

11. Savu, I,D., savu S.V., Benga, G.C., Thermal runawayof the BaCO3+Fe2O3 homogenous mixture and mechanical alloys at the microwave heating, Advacnced Materials, Research Volume 837, pp. 185-189, 2014 (ISI proceedings)

12. G. Benga, Harmonisation and modernization of professional qualifications in inland navigation, Proceedings of the International Conference “ Serbia in the Danube Region in the 21st Century, Belgrade, 24 sept 2013

13. Gabriel Benga, Research and development at IMST Department, invited paper, International Conference Advances in Engineering and Management, ADEM 2012, pp. 1-8, 2012.

14. Gabriel Benga, Mihai Ghiba, Strategy towards harmonization of inland waterways transport education and training, International Conference Advances in Engineering and Management, ADEM 2012, pp.205-208, 2012.

15. A. Olei, G. Benga, I. Stefan, The influence of the tribological testing conditions on the wear rate for some titanium plates processed by spark plasma sintering route, 4th International Conference “ Advanced Composite Materials Engineering” COMAT 2012, 18-20 octombrie, Brasov, 2012

16. Benga, G., Gingu, O. Sima, G., Ciupitu, I., Rotaru, P., Moreno, JC, Thermophysical properties and wear assessment of Nanostructured biocomposites, 1st Central and Eastern European Conference on Thermal Analysis and calorimetry CEEC-TAC1 ", Craiova, 7-10 September, 2011, p.133, ISBN 978-606-11-1893-9;

17. Sima, G., Gingu, O., Benga, G., Rotaru, P., Ruiz-Navas, E., Moreno, J.C. ., Thermal investigation and wear behaviour of lightweight self-lubricant composites for automotive parts, 1st Central and Eastern European Conference on Thermal Analysis and Calorimetry CEEC-TAC1”, Craiova, Sept. 2011; p.225, ISBN 978-606-11-1893-9;

18. Ion Ciupitu, Gabriel Benga, Adela Ionescu, Danut Savu The improving of the process of the iron, the cast iron and the copper powder mixing, Materials Science Forum, Volume 672, pp. 76-79, January 2011, Trans Tech Publication, Switzerland, DOI 10.4028/www.scientific.net/MSF.672.76 (ISI Proceedings)

19. Gabriel Benga, Oana Gingu, Ion Ciupitu, Assessment of wear and tribological behavior of spark plasma sintered Ti, Annals &Proceedings of 21st DAAAM World Symposiums, ISBN 978-3-901509-73-5, ISSN 1726-9679 Published by DAAAM International Vienna, 2010, pg.377-378. (EBSCO Database)

20. Gabriel Benga, Oana Gingu, Ion Ciupitu, Lucian Gruionu, Ileana Pascu, Jose Calderon Moreno - Chapter Title: Processing and laser micromachining of HAP based biocomposites, Book “Engineering the future”, ISBN 978-953-307-210-4, Ed. Sciyo, 2010 (Crossref Database)

21. O.Gingu, G. Benga, A. Olei, N. Lupu, P. Rotaru, S. Tanasescu, M. Mangra, I. Ciupitu, I. Pascu, G. Sima, Wear behavior of ceramic bicomposites based on hydroxiapatite nanopowders, Proceedings of the IMechE, Part E: J. of Process Mechanical Engineering, Vol 224, ISSN 0954-4089 (ISI Journal, Impact factor, 0,463), 2010..

22. Gabriel Benga, Ion Ciupitu, Alexandru Stanimir, Correlation between cutting forces and tool wear when thread tapping AISI P20 hardened steel, Annals of DAAAM for 2009 &Proceedings of the 20th International DAAAM Symposium, Volume 20, No.1, ISSN 1726-9679, ISBN 978-3-901509-70-4, Published by DAAAM International Vienna, pg.1753-1754, 2009 (ISI Proceedings)

23. Benga, G., Ciupitu, I. Influence of coating and tool geometry on the tool life, chapter 91, pp. 931-938, DAAAM International Scientific Book 2009 Vol. 8, ISSN 1726-9687, ISBN 978-3-901509-71-1, Editor: B. Katalinic, hard cover, Publisher DAAAM International Vienna, Vienna, (EBSCO database)

24. Stanimir Alexandru, Pascu Ileana-Cristina, Benga Gabriel, Investigation of work conditions influence on white layer formation in hard machining of Rul1v bearing steel, ANNALS of the

ORADEA UNIVERSITY, Fascicle of Management and Technological Engineering, Volume VIII (XVIII), pp.1425-1430, ISSN 1583 - 0691, CNCSIS " B+", 2009

25. Stanimir. Al., Benga. G., - Influences of Wear of PCBN Inserts, Depth of Cut, Feed Rate, and Cutting Speed on Cutting Forces in Finish Turning of Hardened 205Cr115 Steel, Second International Congress Automotive, Safety and Environment, 23-25 October 2008, Craiova, Romania, Tome 2, pp. 256-261, ISBN 978-606-510-253-8 ; 978-606-510-246-0

26. Benga Gabriel, Ciupitu Ion – The influence of coating and tool geometry on the tool life in a thread cutting process, Annals of DAAAM for 2008 &Proceedings of the 19th International DAAAM Symposium , ISSN 1726-9679, ISBN 978-3-901509-68-1, Published by DAAAM International Vienna, pg.91-92, 2008 (ISI Proceedings)

27. Benga G. – The influence of different PVD coatings techniques on cutting forces in a drilling process, Proceedings of the 6th International Conference of DAAAM Baltic Industrial Engineering, Editor R. Kytnner, pg. 407-411, ISBN 978-9985-59-783-5, 24-26 April 2008, Tallin, Estonia (ISI Proceedings)

28. Benga Gabriel, Stanimir Alexandru – Wear patterns of polycrystalline cubic boron nitride cutting tools when machining hardened bearing steel, Annals of DAAAM for 2007 &Proceedings of the 18th International DAAAM Symposium , ISSN 1726-9679, ISBN 3-901509-58-5, Published by DAAAM International Vienna, pg.73-74, 2007.(ISI Proceedings)

29. S.C. Veldhuis, G.K. Dosbaeva, G. Benga, - Application of ultra-thin fluorine-content lubricating films to reduce tool/workpiece adhesive interaction during thread-cutting operations, International Journal of Machine Tools and Manufacture, volume 47, issues 3-4, ISSN: 0890-6955, Elsevier Science, pg. 521-528, 2007.(ISI Journal, Impact factor 1.956, zona rosie)

30. Gabriel Benga, Stephen Veldhuis – Influence of cutting parameters on the cutting forces when slotting Inconel 617, Proceedings of the International Conference on Manufacturing Systems, ICMaS, 2006, ISSN 1842-3183, pg. 287-291, Editura Academiei Romane, Bucuresti, 2006.

31. G.Benga, S. Veldhuis, M. Khanna – Optimization of a machining process of Inconel 617 using statistical-mathematical methods, Proceedings of the 39th CIRP International Seminar on Manufacturing Systems, CIRP ISMS-2006, ISBN 961-6536-09-5, pg.317-322, Ljubljana, Slovenia, 7-9 June, 2006

32. Gabriel Benga, Alexandru Stanimir – Influence of the cutting parameters and the cutting tool material on the surface finish when machining hardened steel, Microcad 2006 International Scientific Conference, 16-17 March, 2006, Miskolc, Hungary, Conference Proceedings, Section M: Production Engineering and Manufacturing Systems, ISBN 963 661 700 7 O, ISBN 963 661 713 9, pp. 5-9.

33. Gabriel Benga - Trasaturi ale managementului international, Lucrarile Conferintei “La un pas de integrare: Oportunitati si amenintari” 2006, vol. I , ISBN 973-742-371-2, ISBN 978-973- 742-371-9, ISBN 973-742-372-0, ISBN 978-973-742-372-6, Editura Universitaria, pg. 725-728

34. Gabriel Benga - Influence of cutting parameters on dimensional precision when machining hardened steel with ceramic cutting tools, Microcad 2005 International Scientific Conference, 10-11 March, 2005, Miskolc, Hungary, Conference Proceedings, Section M: Production Engineering and Manufacturing Systems, ISBN 963 661646 9 o, ISBN 963 661 659 0, pp. 5-10.

35. Gabriel C. Benga, S.C. Veldhuis, E. Ng, M. Shynlov, J. Dosbaeva, G. Fox-Rabinovich - Assesment of the quality of coatings using drilling operation , chapter 5, pg. 41-54, DAAAM International Scientific Book, ISBN 3-901509-38-0, Published by DAAAM International Vienna, 2004.

36. Gabriel Benga – Aspects regarding the wear of PCBN cutting tools when machining hardened steels, Scientific Bulletin of The Air Force Academy „ Henri Coanda” , Engineering Sciences Section, Nr. 1 (15), anul V, ISSN 1453-0139, pg. 7-16, Brasov, Romania, 2004.

37. Gabriel C. Benga, Alexandre M. Abrao- Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools, Journal of Materials Processing Technology, 143-144, ISSN: 0924-0136, pg.237-241, Elsevier Science, 2003.( ISI Journal, impact factor 1.420, zona rosie)

38. Gabriel C. Benga, Filip G. Ciolacu, Alexandru Stanimir - The influence of the cutting parameters on the swarf shape when turning 100Cr6 hardened steel with ceramic and PCBN cutting tools, Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (ATDC’ 03), ISBN 9958-609-14-2, ISBN 3-901509-35-6, pg. 129-135, Tuzla, Bosnia Herzegovina, 25-28 June, 2003.

39. Gabriel Benga, Alexandre Mendes Abrao – Vida da ferramenta e acabamento superficial no torneamento a seco – Maquinas e Metais, Nr. 435, Editora Aranda, ISSN 0025-2700 pg. 312-323, Brazil, Abril 2002.

40. Gabriel Benga, Mihail Mangra, Alexandre Abrao - Aspects concerning the wear of CC650 and CC670 ceramic inserts when machining 100cr6 hardened steel, International Conference Deformation and Fracture in Structural PM Materials DFPM 2002, ISBN 80-968543-1-3, pg.302-308, Stara Lesna, Slovak Republic, 15-18 September, 2002.

41. Gabriel Benga, Alexandre Abrao, Filip Ciolacu - The Influence of The Cutting Parameters on The Microstructural Alteration of The Machined Surface When Turning 100Cr6 Hardened Steel Using

Ceramic and PCBN Cutting Tools - 2nd International Conference ″Research and Development in Mechanical Industry″, RaDMI 2002, Conference Proceedings, Volume1, ISBN 86-83803-02-3, pg.79-84, Vrnjačka Banja, Yugoslavia, September 2002

42. Gabriel Benga, Vasile Popovici - Influence of the cutting parameters on the surface roughness when turning 100Cr6 hardened steel ceramic cutting tools – Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 47(61), Fascicola 2, ISSN 1224-6077, pg.133-136, Timisoara, Romania, 2002.

43. Gabriel Benga, Vasile Popovici -Influence of the cutting parameters on the surface roughness when turning 100Cr6 hardened steel with polycrystalline cubic boron nitride cutting tools – Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 47(61), Fascicola 2, ISSN 1224-6077, pg.127-132, Timisoara, Romania, 2002.

44. Gabriel Benga, Vasile Popovici, Alexandre M. Abrao - Studies on cutting temperature when machining 100cr6 hardened steel 60-62 HRC using CC650 and CC670 ceramic inserts – International Conference on Manufacturing Systems ICMAS 2002, Conference Proceedings, Editura Academiei Române, ISSN 0035-4074, ISBN 973-27-0932-4, pg.197-200, Bucharest, Romania, 10-11 October 2002.

45. Gabriel Benga, Alexandre M. Abrao - Tool life and surface roughness evaluation when machining 100Cr6 bearing steel, XVI Congresso Brasileiro de Engenharia Mecanica, COBEM 2001, Uberlandia, Brazil, ISBN 85-85769-06-6, pg.17-24, 2001.

46. Gabriel Benga, Vasile Popovici, Alexandre Abrao, Filip Ciolacu – Aspects concerning the optimisation of 100Cr6 hardened steel using PCBN cutting tools – Journal of Non Conventional Technologies, Editura Augusta, Timişoara, ISBN 973-8184-84-3, pg. 15-23, 2001.

47. Alexandru Stanimir, Gabriel Benga – Studies and researches concerning PCBN and ceramic cutting tools tool life – Annals of the University of Craiova – Transactions on Mechanics, ISSN 1223-5296, pg.197-201, 2001.

48. Alexandru Stanimir, Gabriel Benga - Studies and researches regarding the phenomena which causes tool wear of the PCBN and ceramic cutting tools - Annals of the University of Craiova – Transactions on Mechanics, ISSN 1223-5296, pg.189-197, 2001.

49. Filip Ciolacu, N. Crăciunoiu, A.S. Roşca, Gabriel Benga – Assesment of the lubricity of cutting fluids - Annals of the University of Craiova – Transactions on Mechanics, ISSN 1223-5296, pg.61-68, 2001.

50. Gabriel Benga, Filip Ciolacu, Alexandru Stanimir, Madalina Călbureanu – Specific properties of the ultrahard cutting tools (part I) – Annals of the University of Craiova – Transactions on Mechanics, ISSN 1223-5296, pg.46-51, 2000.

51. Gabriel Benga, Filip Ciolacu, Alexandru Stanimir, Madalina Călbureanu – Specific properties of the ultrahard cutting tools (part II) – Annals of the University of Craiova – Transactions on Mechanics, ISSN 1223-5296, pg.51-57, 2000.

52. Vasile Popovici, Gabriel Benga – Considerations regarding recent developments in cutting tool materials, Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 45(59), ISSN 1224-6077, pg. 251-260, 2000.

53. Gabriel Benga, Vasile Popovici – The wear behavior of cubic boron nitride and ceramic cutting tools, Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 45(59), ISSN 1224-6077, pg. 235-242, 2000.

54. Gabriel Benga – Influence of wear on the cutting forces when turning H12F1 hardened steel 62-64 HRC - Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 44(58), ISSN 1224-6077, pg.173-180,1999.

55. Gabriel Benga, Alexandru Stanimir – Aspects concerning the wear and tool life of ceramic cutting tools - Annals of the University of Craiova - Seria Colegiu, ISSN 1223-6020, pg. 92-97, 1999.

56. Alexandru Stanimir, Gabriel Benga, Madalina Calbureanu – Turning of hardened steels – a possible option to replace the grinding operation - Annals of the University of Craiova - Seria Colegiu, ISSN 1223-6020, pg. 98-105, 1999.

57. Vasile Popovici, Gabriel Benga – Aspects regarding the cutting process when are used polycrystalline diamond cutting tools - Buletinul Stiintific al Universitatii “Politehnica” din Timisoara, Transactions on Mechanics, tom 44(58), ISSN 1224-6077, pg. 239-246,1999.

58. Gabriel Benga, Vasile Popovici – Peculiarities of the Single-Crystal diamond cutting tools used in machining process - Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 44(58), ISSN 1224-6077, pg.173-180,1999.

59. Vasile Popovici, Gabriel Benga – Studies on cutting forces and cutting temperature when using CBN cutting tools - Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 43(57), ISSN 1224-6077, pg. 201-208, 1998.

60. Gabriel Benga, Vasile Popovici – Specific features of the cutting process with CBN superhard cutting tools - Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 43(57), ISSN 1224-6077, pg. 181-188, 1998.

61. Vasile Popovici, Gabriel Benga – Ceramic cutting tools used in machining process - Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 42(56), ISSN 1224-6077, pg. 227-232, 1997.

62. Gabriel Benga, Vasile Popovici. – Aspects regarding the wear of cubic boron nitride cutting tools – Scientific Bulletin of “Politehnica”University of Timisoara, Transactions on Mechanics, tom 42(56), ISSN 1224-6077, pg. 196-202, 1997.

63. Stanimir, A., Benga, G., Calbureanu, M. - The main directions to raise the cutting precision when turning hardened steels – Annals of the University “Constantin Brancusi” Tg. Jiu, Seria A, NR. 2/1995, pg. 359-366, 1995.

64. Alexandru Stanimir, Gabriel Benga, Gh. Tîrpe, Mihai Demian, Iancu Holtea – Studies regarding the influence of the hardened workpiece on cutting forces in turning operation, International Conference TEHNO-MAN 95, Timişoara, Conference Proceedings, pg.57-62, 1-2 iunie 1995.

65. Alexandru Stanimir, Gabriel Benga, Mădălina Călbureanu – Possible ways to improve the surface quality when turning hardened steels, Simpozionul “Zilele Universitare Severinene” 26-28 mai 1995.

66. Mihai Demian, Iancu Holtea, Gabriel Benga - Studies to determine the ultrasonic waves in solids using “Sonic136 plus”, Simpozionul “Zilele Universitare Severinene” 26-28 mai 1995.

Brevete de inventie:

Numar: RO125713

Material bicompozit si procedeu de elaborare a acestuia

Autori: GINGU O, PASCU C I, LUPU N, BENGA G C

Recunoaștere internațională

Citări în reviste ISI fara autocitari (print screen from Web of Science WOS): 86

Număr de citari in BDI SCOPUS (print screen from SCOPUS Database) : 118

Alte activitati semnificative

• 2009, 2010, 2011, 2014 , 2015, 2016, 2018- Deans' and Academic Directors Honor Committee of DAAAM International, http://www.daaam.com/daaam/Committies/Deans_Committee.htm

• 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2018 - DAAAM International Program Committee, http://www.daaam.com/daaam/Committies/Index_Committee.htm

• 2009, 2010, 2011, 2014, 2014, 2015, 2016, 2018 - DAAAM International Review Committee, http://www.daaam.com/daaam/Committies/Review_Committee.htm

• • Reviewer

• Editor la jurnale internationale

În 2015 am fost redactor la Advanced Engineering Forum, vol. 13 care conținea o colecție de lucrări selectate de evaluatori în cadrul conferinței internaționale Advances in Engineering and Management, publicată de Trans Tech Publications, așa cum se poate observa din imaginea de mai jos (un print screen din contul scientific.net)

Date post:	23-Jan-2020
Category:	Documents
Upload:	others
View:	5 times
Download:	0 times

Curriculum vitae Europassmecanica.ucv.ro/ProgrameStudii/Doctorat/Conducatori... · Facultatea de...

Documents