Universitatea Politehnica din Timisoara Nr. · PDF fileCorina, Mesaros-Anghel Voicu, Argesanu...

Universitatea "Politehnica" din TimisoaraFacultatea: MecanicaDepartamentul/ catedra: MECATRONICAAdresa site web: http://mctr.mec.upt.ro/

Personal permanentPersonal cu angajament

temporarProfesori: 10 10

Conferentiari: 8 8

Sefi de lucrari: 16 16

Asistenti: 12 12

Preparatori:Cercetatori:Cercetatori postdoctoranzi:Doctoranzi cu frecventa: 14

Nume Adresa email Telefon

Director departament / Sef catedra: Lovasz Christian Erwin [email protected] 0256-403542

Secretar stiintific:prof.dr.ing. Davidescu;

conf.dr.ing. Sticlaru Carmen; prof.dr.ing.

Dolga Lia

[email protected]; [email protected];

[email protected]

0256-403559; 0256-403559; 0256-403033

Din care:

Total personal cercetare Nr.

Competente de cercetare:

Actionari pneumaticeMecatronica generalaAutomate programabileSisteme de ActionareMecanismeDomenii de utilizare a robotilorTehnici si sisteme de măsurareInginerie medicalăRoboticăOrgane de masiniTransmisii mecaniceModelare simulareProiectare asistataTribologieErgoinginerieAnaliza mecanismelor Sinteza mecanismelorInvestigare biometricaSecuritate ocupationala

Domenii de cercetare:

MecatronicaRoboticaInginerie medicalaOrgane de masiniTransmisii mecaniceModelare simulareProiectare asistataTribologieErgoinginerieMecatronicaSisteme de Management al Calitatii si MediuluiSisteme de MasurareMetrologieAparatura BiomedicalaStiinta masinilor si a mecanismelorInginerie biomedicala

Infrastructura pentru cercetare

Nr. crt. Laboratoare de cercetare Sala Adresa site

web Facilitati oferite Responsabil laborator Contact (mail, telefon)

1 Metrologie H10 Masina de masurat in coordonate Metris CV10.7.7. Prof.dr.ing. Arjana Davidescu [email protected],

0256403559

2 Laborator de Sisteme de Actionare si Automatizari M08

Echipamente de actionare pneumatica si electro-pneumatica; Standuri pentru

pozitionare pneumatica precisa; Automate programabile si accesorii; Tehnica de calcul

Ciupe Valentin [email protected]

3 Laborator Cloos pentrue sudare robotizata H02 Training pe celule de sudare robotizate Prof.dr.ing. Maniu Inocentiu [email protected]

4 Inginerie optica M316

Banc optic de uz general cu accesorii pentru masurarea caracteristicilor de referinta ale sistemelor optice, determinari fotometrice; Truse complete de componente optice si

mecanice; Refractometru Abbe; Microscop de cercetare cu preluare digitala de imagine;

Aparate si truse pentru investigatii optometrice; Retea de calculatoare; Soft

specializat pentru analiza sistemelor optice

conf.dr.ing. C. Gruescu [email protected]

5 Laborator de ergoinginerieCladire

Orologerie - Mezanin

http://mctr.mec.utt.ro/

Laborator didactic: Master ergoinginerie, Inginerie medicala, Cercetare

Conf. dr. ing. Argesanu Veronica

[email protected] 0256403562

6 Investigare biometrica P1 scanare 3D cu franje de lumina, scanare 3D cu ultrasunete Conf.dr.ing. Erwin-Chr. Lovasz [email protected], 0256-

403542

7 Aparatura si echipamente medicale 406 http://www.mec.upt.ro

cercetari in domeniul ingineriei medicale, ergoinginerie Prof.dr.ing. Vacarescu Valeria [email protected];

tel: 0256-403551

8 Laborator de achizitia si prelucrarea formelor 3D Sala 225-1 http://mec.upt.ro/

gddgcTehnica de calcul, echipamente de birotica si de uz general, echipamente de specialitate Prof.dr.ing. Lia DOLGA [email protected],

0256403872

9 Laborator CAD si analiza fiabilitatii Sala 225-2 http://mec.upt.ro/gddgc

Tehnica de calcul, echipamente de birotica si de uz general Prof.dr.ing. Lia DOLGA [email protected],

0256403872

10 Laborator de grafica tehnica asistata de calculator Sala 194 http://mec.upt.ro/

gddgcTehnica de calcul, echipamente de birotica si

de uz general S.L.dr.ing. Doina SAFTENCU [email protected], 0256403739

11 Laborator de grafica tehnica asistata de calculator si CAD Sala 219 http://mec.upt.ro/

gddgc Tehnica de calcul si echipamente de birotica As.dr.ing. Eugen ZABAVA

As.ing. Ladislau WALKOVSZKY

[email protected], 0256403784

[email protected], 0256403783

mailto:[email protected],%200256403559�


mailto:[email protected]�



mailto:[email protected] 0256403562�

mailto:[email protected] 0256403562�

mailto:[email protected],%20%200256-403542�

mailto:[email protected],%20%200256-403542�

http://www.mec.upt.ro/�

http://www.mec.upt.ro/�

mailto:[email protected];%20tel:%200256-403551�

mailto:[email protected];%20tel:%200256-403551�

http://mec.upt.ro/gddgc�














Totala multianuala

Contributie proprie UPT

1

ThinkMOTION, Digital Mechanism and Gear Library goes Europeana

250485/ CIP-ICT-PSP-2009-3 FP7

European Commission

Grant Agreement354.162 € 177.081 € 177.081 € 94.443 €

Technische Universitaet Ilmenau -CO, Universidad del pais

Vasco, Universitatea Politehnica din Timisoara, Rheinsch-

Westfaelische Technische Hochschule Aachen, Institut

Francais de Mecanique Avancee, Universita degli Studi

di Casino

Erwin-Chr. Lovasz Resp.UPT, Dan Perju, Inocentiu Maniu, George Savii, Iosif

Carabas, Vacarescu Valeria, Gruescu Corina, Mesaros-Anghel Voicu, Argesanu

Veronica, Dan Margineanu, Agneta Lovasz, Ivan Bogdanov, Dehelean Nicolae,

Dehelean Liana, Sticlaru Carmen, Dobra Andreea, Zabava Eugen, Ciupe Valentin, Moldovan Cristian, Vatau Steliana, Ianosi Endre, Bereteu Liviu, Tucu Dumitru, Dolga

Valer

finantat incepand cu data de 01.06.2010

Nr. crt.

Denumirea proiectului

Numarul proiectului

Tipul proiectului Echipa de lucru din UPT Realizari in anul

2010

Proiecte internationale

Valoare totala proiect pentru UPTFinantator Parteneri (cu precizarea

coordonatorului)Valoare

totala proiect

Valoare totala realizata in 2010

pt UPT

Totala multianuala

Contributie proprie UPT

1

Sistem modular autonom pentru monitorizarea

conditiilor atmosferice

72-169/ 01.10.2008 PN_II CNMP 48.630 32.630 0 32.630INCDMTM Bucuresti, Acad. De

Stiinte din Romania, INCDIE ICPE-CA Bucuresti, IRECSON Bucuresti

Dolga Valer, Dolga L., Maniu I., Carabas I., Ciupe V., Moldovan C., Dobra A., Teodorescu A.,

Filipescu H.

Protocol 2010, cercetare teoretica si experimentala

2

Sisteme mecatronice

complexe pentru aplicatii in medicina

72-197/01.10.2008 PN_II CNMP 112.000 54.000 0 54.000 U.Tehnica Cluj Napoca, Univ. Trans. Brasov

Dolga Valer, Maniu I., Radulescu C., Vacarescu V., Dolga L., Toth Tascau M., Lovasz E., Dreucean

M., Dobra A., Grigorescu S., Ciupe V., Moldovan C.,

Teodorescu A., Vatau S.,

Protocol 2010, cercetare teoretica

3Ergoingineria locului de munca-aplicatii in

medicina dentara

91-022/18.09.2007 – 2010 CNMP/PNCDI 2 CNMP 2.000.000 1.200.000 310.849

Director Contract Argesanu Veronica Coordonator: Universitatea

Politehnica din Timisoara, Partener 1 - Universitatea de Medicina si

Farmacie “Victor Babes” Timisoara, Partener 2 – Asociatia Societatea Romana de Ergonomie Dentara

Bucuresti, Partener 3 - SC RA-OL SRL Timisoara, Partener 4 –

Universitatea “Ovidius” Constanta

Argesanu Veronica, Lovasz Erwin-Christian, Davidescu Arjana,

Carabas Iosif, Văcărescu Valeria, Dolga Valer, Gruescu

Corina, Mateas Marius, Sticlaru Carmen, Maniu Inocentiu, Jula

Mihaela, Popa Anca, Dobra Andreea, Madaras Lucian,

Crastiu Ioan, Miclea Florian, Voinescu Mihai, Davidescu

Roxana

Dezvoltarea infrastructurii necesare pentru training a centrului pilot CPEIDENT;

participari la congrese, conferinte, simpozioane,

publicatiinationale si internationale; depunerea a

doua cereri de brevet la OSIM.

Proiecte nationale

Nr. crt.


Numarul proiectului

Tipul proiectului Finantator

Valoare totala

proiect

Valoare totala proiect pentru UPT Echipa de lucru din UPT Realizari in anul 2010

Valoare totala realizata in 2010

pt UPT

Parteneri (cu precizarea coordonatorului)

Totala multianuala

Cofinantare UPT

1

Master international in

robotica adaptabil la piata fortei de

munca

POSDRU

1. Educatia si formarea

profesionala in sprijinul cresterii

economice si dezvoltarii societatii

bazate pe cunoastere

1.2 Calitate in invatamantul

superior

POSDRU 18/1.2/G/28382

11999/26.05.2010

Prof.dr.ing. Maniu Inocentiu

Universitatea Tehnica din Cluj-Napoca

(coordonator), HAMK University of Applied

Science Finlanda

280.025 lei 5.601 lei167.900 (in perioada

iunie 2010 - mai 2011)

Maniu Inocentiu, Ciupe Valentin,

Moldovan Cristian, Miclea Florian

Selectarea si formarea grupului de lectori; Selectarea si formarea

grupului tinta

2

FLEXFORM - Program de

formare profesionala flexibila pe platforme

mecatronice

POSDRU

Educatia si formarea

profesionala in sprijinul cresterii

economice si dezvoltarii societatii

bazate pe cunoastere

Dezvoltarea resurselor umane

din educatie si cunoastere

POSDRU/ 87/1.3/S/64069 ID 64069 Prof. dr. ing. Valer

DOLGA

U.Tehnica Cluj Napoca

(coordonator), Univ. Trans. Brasov, Univ

Politehnica Bucuresti,Univ. Craiova, Univ.

"Dunarea de jos" Galati, Univ. Tehnica

"Gh. Asachi" Iasi, Festo SRL

1.883.306 lei 37.243,98 lei 726.446,36 lei

Dolga Valer, Dolga L., Hudac D., Ruset

D., Dreucean M., Savii G., Davidescu

A., Carabas I., Ciupe V., Vatau S.,

Moldovan C., Dobra A., Teodorescu A.

Initiere program, constituire grup tinta

3

Flexicuritatea-adaptarea la o piata a muncii

prospera

POSDRU Axa prioritara 3 Domeniul major de interventie 2 59583 E 8808 /

15.11.2010Prof.dr.ing.

Vacarescu Valeria

S.C. Terramold Iasi - coordonator, UPT, Universitatea din Pitesti, Inspectia

Muncii, Institutul de Politici Publice,

AJOFM Iasi, Universitatea Tehnica

din Creta

1.197.641 lei 25.150 lei 0

Vacarescu Valeria, Izvercian Monica,

Draghici Anca, Prostean Gabriela,

Miclea Florian

0

Parteneri (cu precizarea

coordonatorului

Valoare totala pentru UPT Valoare totala realizata in 2010

Echipa de lucru din UPT Realizari in anul 2010

Proiecte finantate din Fonduri Structurale

Tip Proiect (POSDRU,

POSCCE, etc)

Nr. crt.


Codul proiectului

Numar inregistrare

proiect

Coordonator din UPTAxa prioritara

Domeniul major de

interventie

Totala An 2010

1Centru regional de training FESTO in automatizari el-

pneumatice749/ 2007 SC FESTO SRL SC FESTO SRL 8.973 lei 8.973 lei Maniu Inocentiu, Ciupe

Valentin

2 perioade de training pentru instruirea personalului din

industrie

2Ergoingineria locului de

munca-aplicatii in medicina dentara

91-022/ P3, S.C. RA-OL S.R.L. UPT S.C. RA-OL S.R.L. 16.700 € 16.700 € Argesanu Veronica Prototip brevete de

inventie

3

Untersuchungen zur kinetostatische Analyse von Nachgiebigen Mechanismen mittels Mehrkörpersimulation

BC 7/ 25.10.2010 Universitatea Tehnica Dresden

Universitatea Tehnica Dresden 11.500 € 7.000 €

Lovasz Erwin-Chr., Margineanu Dan, Maniu Inocentiu, Valentin Ciupe

Cercetarea contractata

ObservatiiValoare proiect Echipa de lucru Realizari in anul 2010

Contracte cu terti

Nr. crt.

Denumirea contractului

Numarul contractului Beneficiar Finantator

Finantare solicitata

Contributie UPT

1

Noi Tipuri De Distribuitoare Pneumatice Inteligente Si

Reconfigurabile, In Conceptie Mecatronica

9(37)/ 2010 TE CNCSIS CNCSIS 750.000 0 -

Ciupe Valentin, Vatau Steliana, Moldovan

Cristian, Ciontos Ovidiu

Respins

2Noi Algoritmi De Control Pentru Sisteme Robotice

Mobile Redundante

COD CNCSIS 40 TE CNCSIS CNCSIS 750.000 0 -

Vatau Steliana, Ciupe Valentin, Moldovan

Cristian, Ciontos Ovidiu

Respins cu 85 puncte

Proiecte internationale si nationale depuse spre finantare

Finantator

Valoare solicitata pentru proiect Parteneri (cu

precizarea coordonatorului)

Situatia proiectului (respins / in curs de

evaluare)

Organismul care evalueaza

proiectul

Echipa de lucru din UPT

Nr. crt. Denumirea proiectului

Numarul inregistrare

proiect

Tipul proiectului

Nr. crt. Luna Autor(i) Titlu articol Revista ISI in care a fost

publicat articolulNumar vol., pagina,

nr. pagini ISSN Site web revista Factor de impactFacultate /

departament - primul autor

1 ianuarie Popa M., Saracin C., Popa A.S., Marcu M.

A Pedestrian Navigation System for Car Locating

Journal of Control Engineering and Applied Informatics

Vol. 12, Issue 1, 2010, 38-46, 9 1454-8658 http://www.ceai.srait.

ro/index.php/ceai 0 AC/ C - Mecanica/ Mecatronica

2 octombrieVatau Steliana, Ciupe

Valentin, Moldovan Cristian, Maniu Inocentiu

Mechanical design and system control of quadruped robot MECHANIKA 85(5), 56, 4 1392-1207 http://zurnalas.mech

anika.ktu.lt/?lang=2 0,78 Mecanica/ Mecatronica

Nr. crt. Luna Autor(i) Titlu lucrare

Volumul ISI Proceedings in care a fost publicata

lucrareaPagina, nr. pagini ISBN Site web

conferinta

Facultate / departament - primul

autor

1 februarieCorina Gruescu, Ioan

Nicoara, Gilbert-Rainer Gillich

Comment on Specific Features of Optomechanical Fits

Proceedings of the 5th IASME/WSEAS International

Conference on Continuum Mechanics, 2010

54, 6

ISBN 978-960-474-158-8; ISSN 1790-

5095

www.wseas.org Mecanica/ Mecatronica

2 mai R. Sofronia, G. Savii, A. Davidescu

Haptic Devices in Engineering and Medicine

IEEE International Joint Conferences on Computational

Cybernetics and Technical Informatics (ICCC-CONTI 2010)

373-378, 6 978-1-4244-7432-5

http://uni-obuda.hu/conferences/iccc-conti2010/

Mecanica/ Mecatronica

3 iulie Bistrian, D., Savii, G.Non Axysimmetrical Stability Study of

Swirling Flows Using a Projection Algorithm

Latest Trends on Computers (Volume I), Proceedings of the 14-

th WSEAS International Conference on Computers

103-108, 6 978-960-474-201-1

http://www.wseas.us/conferences/2010/c

orfu/iccomp/

FIH/ IEII - Mecanica/ Mecatronica

4 septembrieD. A. Bistrian, I.

Dragomirescu, G. Savii, D. Stoica

Spectral Differentiation Operators for Solving Hydrodynamic PSE Models

American Institute of Physics Conference Proceedings 1281 448-451, 4 978-0-7354-

0831-9http://www.icnaam.o

rg/icnaam_2010/FIH/ IEII - Mecanica/

Mecatronica

5 septembrie

N. Modler, K.-H. Modler, W. Hufenbach, M. Gude, J.

Jaschinskei, M. Zichner, E.-C. Lovasz, D. Margineanu,

D. Perju

Cyclic Test of Textile-Reinforced Composites in Compliant Hinge

New Trends in Mechanism Science, Springer Verlag 173-180, 8 978-90-481-

9688-3

http://www.eucomes2010.utcluj.ro/index.

htmlMecanica/ Mecatronica

6 septembrie

D. Perju, E.-C. Lovasz, K.-H. Modler, L.M. Dehelean,

E.C. Moldovan, D. Margineanu

Size Minimisation of the Cam Mechanisms with Translating Roll

Follower

New Trends in Mechanism Science, Springer Verlag 245-252, 8 978-90-481-

9688-3


htmlMecanica/ Mecatronica

7 septembrieN. M. Dehelean, L. M.

Dehelean, E.-C. Lovasz and D. Perju

A Theoretical Improvement of Stirling Engine PV Diagram

New Trends in Mechanism Science 613, 11 978-90-481-

9688-3www.eucomes2010.

utcluj.ro Mecanica/ Mecatronica

2. Lucrari stiintifice publicate in volume cotate ISI Proceedings

1. Articole publicate in reviste cotate ISI

http://www.ceai.srait.ro/index.php/ceai�

http://www.ceai.srait.ro/index.php/ceai�

http://zurnalas.mechanika.ktu.lt/?lang=2�

http://zurnalas.mechanika.ktu.lt/?lang=2�

http://www.wseas.org/�

http://ieeexplore.ieee.org/�



8 octombrie

S. Stratul, I. Chirileanu, M. Anghel, Argesanu

Veronica, R. Kulcsar, C. Comes

Thermographical Methods in Highlighting the Muscle Strain of Dentists during

Dental Treatments Under the Microsope

Annals of DAAAM for 2010 & PROCEEDINGS The 21st

International DAAAM SYMPOSIUM “Intelligent

Manufacturing & Automatation: Theory, Practice & Education” pp. 1365-1367 October 2010, Zadar,

Croatia

1365-1367, 2

ISSN 1726-9679, ISBN

978-3-901509-73-5

http://daaam.com/daaam/Symposium/Sy

mposium.htmMecanica/ Mecatronica

9 octombrie

R. Kulcsar, C. Talpos-Niculescu, Argesanu

Veronica, M. Anghel, S. Talpos-Niculescu, R. Jianu

Biomechanics of Lumbar Pain in Dentistry




Croatia

1369-1371,2


978-3-901509-73-6



10 octombrie

S. Stratul, D. Rusu, R. Kulcsar, Argesanu

Veronica, A. Ogodescu, L. Nica

Thermographical Methods in Highlighting the Tendinitis in Dentistry




Croatia

1373-1375, 2


978-3-901509-73-7



11 octombrie

R. Kulcsar, Argesanu Veronica, S. Stratul, S.

Talpos-Niculescu, C. Comes, M. Jula

Ergonomical Aspects Regarding Mechanical Vibration Damages to the

Lumbar Spine




Croatia

1371-1373, 2


978-3-901509-73-8



12 octombrie

V. Văcărescu, C – F. Văcărescu, Argesanu

Veronica, A. Draghici, I. Crâştiu

The differential modeling of end-effector’s pose errors applied to robots calibration




Croatia

0011-0013, 2


978-3-901509-73-

10



13 octombrie Ianosi Endre Considerations about electrical safety in the dialysis process

Annals of DAAAM for 2010 & Proceedings 915, 2 978-3-90159-

73-5 www.daaam.com Mecanica/ Mecatronica

14 octombrie Vacarescu Cella-Flavia, Vacarescu Valeria

The Taguchi's Quality Loss Function in Development and Design for Bulk Goods

in the Automotive Field

The Proceedings of The 21th International DAAAM Symposion

“Intelligent Manufacturing & Automation, 21st DAAAM

International, World Symposium, Zadar, Croatia, 2010-10-20/24

0009-0010 1726-9680 http://www.daaam.com/

MPT/ Management - Mecanica/ Mecatronica

15 octombrie Filipescu, H.; Negru, R.; Marsavina, L.; Caplescu, C.

Assessment Of Two Fracture Criteria For Components With Circlar Holes

ANNALS OF DAAAM FOR 2010 & PROCEEDINGS 0023, 2 1726-9679 www.daaam.com Mecanica/ Mecatronica

http://daaam.com/daaam/Symposium/Symposium.htm�









http://www.daaam.com/�


Nr. crt. Luna Autor(i) Titlu articol

Revista in care a fost publicat

articolul

Numar vol., pagina, nr. pagini ISSN Site web revista

Baza de date in care este

indexata revista

Link-ul la Baza de date in care este indexata revista

Facultate / departament - primul autor

1 ianuarie

D. A. Bistrian, I.

Dragomirescu, G. Savii

Descriptor Techniques for Modeling of Swirling Fluid

Structures and Stability Analysis

WSEAS Transactions On Mathematics

Issue 1, Volume 9, 56-66, 11 1109-2769

http://www.worldses.org/journals/mathemati

cs/MatSciNet http://www.ams.org/maths

cinet/FIH/ IEII - Mecanica/

Mecatronica

2 septembrie

VATAU Steliana, CIUPE

Valentin, MANIU

Inocentiu

Java simulator for quadruped walking robot Solid State Phenomena 166-167, 445, 6 1012-0394 http://www.ttp.net/978-

3-908451-88-4.html SCOPUS http://www.scopus.com Mecanica/ Mecatronica

3 septembrie

E.-C. Lovasz, D. Perju, N.

Dehelean, L.M. Dehelean, I. Maniu, C. Moldovan

Self-Balanced Conco-Balancer Manipulator with

Band MechanismSolid State Phenomena 166-167, 259-265, 6 1012-0394 http://www.ttp.net/101

2-0394.html Scopus http://www.scopus.com Mecanica/ Mecatronica


Volumul in care a fost publicata

lucrareaPagina, nr. pagini ISBN Site web

conferinta

Baza de date in care este

indexat volumul

Link-ul la Baza de date in care este indexat volumul


1 februarie Dobra AndreeaComparative Analysis of ZMP for Biped Robot and Human Plantar Pressure

The Fifth International Conference on

Optimization Of Robots And Manipulators OPTIROB 2010

223-226, 4 978-981-08-5840-7 www.rpsonline.com.sg Crossref http://www.scientific.net/S

SP.166-167/2Mecanica/

Mecatronica

2 aprilie Tilneac M., Dolga Valer

Individual plant recognition using the RGB color

model

15th IEEE Mediterranian electromechanical

conference1147-1152, 6 978-1-4244-5794-6 www.melecon2010.or

g IEEE Explore

http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?reload=true&punumber=547

0286


3 mai Dolga Valer, Dolga L.

Analysis & modelling options of elastic actuators

for new robotics uses

OPTIROB, Optimization of the robots and manipulators

136-140, 5 978-981-08-5840 http://optirob2010.eventbrite.com/ Crossref http://www.crossref.org/ Mecanica/

Mecatronica

4 mai Alin Bitea, Dolga Valer

The use of Sensors in a working area of a mobile

robot



Mecatronica

5 mai

O. Ciontos, Dolga Valer,

Vancu Alexandru

Assumptions and Approximations in the modeling of bipedal

walking using the model of inverted pendulum



Mecatronica

2. Lucrari stiintifice publicate in volume indexate BDI

1. Articole publicate in reviste indexate BDI

http://www.ttp.net/978-3-908451-88-4.html�

http://www.ttp.net/978-3-908451-88-4.html�

http://www.scopus.com/�


http://www.scientific.net/SSP.166-167/2�


http://ieeexplore.ieee.org/xpl/mostRecentIssue.jsp?reload=true&punumber=5470286�




6 maiF. Moldovan, Dolga Valer, Sticlaru C.

A new type of walking robot based upon Jansen

Mechanism



Mecatronica

7 maiPopa M.,

Argesanu V., Popa A.S.

Car Finding with a Pedestrian Navigation

System

Proceedings of HSI 2010, The 3rd International

Conference on Human System Interaction, May 13-15, Rzeszow, Poland

406-411, 5 978-1-4244-7651-2 http://hsi.wsiz.rzeszow.pl/ IEEEXplore http://ieeexplore.ieee.org AC/ C - Mecanica/

Mecatronica

8 mai

Popa M., Ciocarlie H., Popa A.S., Racz M.

Smart metering for monitoring domestic

utilities

Proceedings of INES 2010, The 14th

International Conference on Intelligent Engineering Systems, May 5 – 7, 2010,

Las Palmas, Spain

55-60, 5 978-1-4244-7650-3http://www.ines-conf.org/ines-conf/2010.html

IEEEXplore http://ieeexplore.ieee.org AC/ C - Mecanica/ Mecatronica

9 maiPopa M., Popa A.S., Ciocarlie

H.

A layered architecture for ad hoc networks of mobile

embedded systems

Proceedings of INES 2010, The 14th

International Conference on Intelligent Engineering Systems, May 5 – 7, 2010,

Las Palmas, Spain

243-248, 4 978-1-4244-7650-3http://www.ines-conf.org/ines-conf/2010.html


10 iunie

Voicu Claudia, Reinhard Schmidt,

Lammen B., Hillbrand H.H.,

I. Maniu Inocentiu

Analysis of Sensors for Vibration and Nip Forces

Monitoring of Rubber Coated Rollers

Applied Mechanics and Materials, Advances in

Experimental Mechanics VII

vol. 24-25, 83-88, 6 1662-7482 www.scientific.net/AMM.24-25 SCOPUS www.scopus.com Mecanica/

Mecatronica

11 IuniePopa A.S., Popa M., Marcu M.

Motion planning for a mobile robot

Proceedings of RAAD 2010, The 19th

International Workshop on Robotics in Alpe-Adria-

Danube Region, June 24 – 26, 2010, Budapest,

Hungary

167-171, 5 978-1-4244-6885-0 http://www.bmf.hu/conferences/raad2010/ IEEEXplore http://ieeexplore.ieee.org Mecanica/

Mecatronica

12 iunie Popa M., Popa A.S., Marcu M.

Practica; aspects of undergraduate education

in robotics

Proceedings of RAAD 2010, The 19th

International Workshop on Robotics in Alpe-Adria-

Danube Region, June 24 – 26, 2010, Budapest,

Hungary

279-284, 6 978-1-4244-6885-0 http://www.bmf.hu/conferences/raad2010/ IEEEXplore http://ieeexplore.ieee.org AC/ C - Mecanica/

Mecatronica

13 iunie Dobra, A.; Joni, N.;

Robotized welding of large one-dimensional

structures

19th International Workshop on ROBOTICS IN ALPE-ADRIA-DANUBE

REGION RAAD

100-103, 4 978-1-4244-6885-0 http://www.bmf.hu/conferences/raad2010/

IEEE CFP1075J-CDR; ISBN 978-1-

4244-6884-3

http://ieeexplore.ieee.org/Xplore/guesthome.jsp


14 septembrie Dolga Valer, Dolga L.

The design approach of human prostheses and

intelligent robot end effectors based on

mechatronic philosophy

Robotics automation systems 130-133, 4

ISBN-13 978-3-908451-88-4; ISSN

1012-0394

http://robotics10.utcluj.ro/legal.html Scopus

http://www.researchandmarkets.com/reports/1382556/robotics_and_automatio

n_systems





http://www.scientific.net/AMM.24-25�

http://www.scientific.net/AMM.24-25�




15 septembrie F.Moldovan, Dolga Valer

Analysis of Jansen walking mechanism using CAD

Robotics automation systems 151-154, 4

ISBN-13 978-3-908451-88-4; ISSN

1012-0394

http://robotics10.utcluj.ro/legal.html Scopus

http://www.researchandmarkets.com/reports/1382556/robotics_and_automatio

n_systems


16 septembrie

Ciupe Valentin, Vatau Steliana,

Maniu Inocentiu

Scaled Experimental Stand for Testing Control

Algorithms on Brake Systems with Anti-Lock

Capability

Solid State Phenomena, Robotics and Automation

Systemsvol. 166-167, 121-126, 6 1012-0394 http://www.scientific.n

et/SSP.166-167 SCOPUS www.scopus.com Mecanica/ Mecatronica

17 septembrie

Comsa Andrei, Maniu

Inocentiu, Lovasz Erwin

Christian

Triangulation 3D Scanning Method in Biomedical

Reconstruction

Solid State Phenomena, Robotics and Automation

Systemsvol. 166-167, 145-148, 4 1012-0394 www.scientific.net/SS

P.166-167 SCOPUS www.scopus.com Mecanica/ Mecatronica

18 septembrie Popa M., Popa A.S., Marcu M.

A Distributed Smart Card Access Control System

Proceedings of SISY 2010, The 8th International Symposium on Intelligent Systems and Informatics,

Subotica, Serbia, September 10 – 11, 2010

341-346, 6 978-1-4244-7394-6http://uni-

obuda.hu/conferences/sisy2010/


19 septembrie Popa M., Popa A.S., Marcu M.

A LAN based intelligent climate control system for

delimited spaces

Proceedings of SISY 2010, The 8th International Symposium on Intelligent Systems and Informatics,

Subotica, Serbia, September 10 – 11, 2010

347-352, 6 978-1-4244-7394-6http://uni-

obuda.hu/conferences/sisy2010/


20 decembrie Dobra AndreeaTools management solution for small

enterprises

Proceedings of 2010 International Conference

on Mechanical Engineering, Robotics and Aerospace, ICMERA2010

327-330, 4 978-1-4244-8867-4http://www.wix.com/ol

aruadrian/icmeras-2010

IEEE CFP1057L-PRT http://ieeexplore.ieee.org Mecanica/

Mecatronica


http://www.scientific.net/SSP.166-167�

http://www.scientific.net/SSP.166-167�




http://www.wix.com/olaruadrian/icmeras-2010�




Nr. crt. Luna Autor(i) Titlu articol Revista in care a fost publicat

articolulNumar vol., pagina,

nr. pagini ISSN Site web revistaFacultate /


Clasificare CNCSIS / 2010 (daca e cazul)

1 februarie

C. Comes, A. Valceanu, D. Rusu, A. Didilescu, A.

Bucur, Argesanu Veronica, S-I. Stratul

A study on the ergonomical working modalities using the dental

operating microscope (DOM ). Part II : Ergonomic design elements of

the operating microscopes

Timisoara Medical Journal, 14-th International Symposium “The Medical Days in Banat” – Timişoara ian - feb, 2010, ISSN 1583-5251,

pp. 97-102

60, 97-102, 6 1583-5251 http://www.siicsalud.com UMF Bucuresti B+

2 martieE.-C. Lovasz, D. Perju,

C. Duca, K.-H. Modler, I. Carabas, E.S. Zabava

Numerical Method for Determination of the Basic Radius of the Cam Mechanism with Flat Oscilating

Follower

Buletinul Stiintific al UPT 55(69), 21-26, 6 1224-6077 http://www.eng.upt.ro/buletin/index.html

Mecanica/ Mecatronica B

3 mai Ghiba Mihai Ovidiu, Dreucean Mircea

Finite Element Analyses (FEA) o fa mini Hip Endoprostheses with Mesh

Structure

Annals o fthe Oradea University. Fascicle of Management and Technological Engineering,

Vol. IX (XIX)/3, 20101, 64, 6 1583-0691 http://imtuoradea.ro/conf/ Mecanica/

Mecatronica B+

4 maiGruescu C., Bodea R.,

Amarandei M., Garaiman A.

Solution for the Design of Thermal IR Objectives

Annals of the Oradea University, Fascicle of Management and Technological Engineering,

vol.IX(XIX)

vol. IX(XIX), 2010/3, 2.38-2.43, 6 1583-0691

http://imtuoradea.ro/auo.fmte/2010.v3.mechatronic

s.php

Mecanica/ Mecatronica B+

5 maiArgesanu Veronica, M.

Anghel, M. Jula, C. Comes, R. Kulcsar

Current Methods of Investigation of the Postural Status in Dental

Medicine

Timisoara Medical Journal, Volume 60, Supplement 1/2010 ISSN 1583-5251, pp. 15 -

17 Milenium III Medicine, The International Congress of Medical Days in Banat, 15th

Edition

60,15-17, 3 1583-5251 http://www.siicsalud.com Mecanica/ Mecatronica B+

6 mai

C. Talpos-Niculescu, D. Lungeanu, Argesanu

Veronica, M. D. Anghel, S. Talpos

Is possible to practice dentistry whithout musculo-skeletal pain?

Timisoara Medical Journal, Volume 60, Supplement 1/2010 ISSN 1583-5251 pp. 85 - 87, Milenium III Medicine, The International Congress of Medical Days in Banat, 15th

Edition

60, 85-87, 3 1583-5251 http://www.siicsalud.com UMFVB Timisoara B+

7 mai

A. Valceanu, C. Comes, D. Rusu, M. Bucur, M.

Anghell, Argesanu Veronica, S - I. Stratul

A study on the ergonomical working modalities using the dental

operating microscope (DOM ). PART III: Ergonomical features of

contemporary top dental microscopes commeted

Timisoara Medical Journal, 14-th International Symposium “The Medical Days in Banat” – Timişoara may 19-24, 2010, ISSN 1583 -

5251, pp.102-108

60, 102-108, 6 1583 -5251 http://www.siicsalud.com UMFVB Timisoara B+

Articole publicate in reviste fara cotatie ISI / neindexate BDI

http://www.siicsalud.com/�

http://www.eng.upt.ro/buletin/index.html�

http://www.eng.upt.ro/buletin/index.html�

http://imtuoradea.ro/conf/�

http://imtuoradea.ro/auo.fmte/2010.v3.mechatronics.php�






8 iunieE.-C. Lovasz, D. Perju, I. Carabas, K.-H. Modler,

E.S. Zabava

Basic Circle Radius of the Cam Mechanism with Flat Oscilating

FollowerBuletinul Institutului Politehnic din Iasi LVI(LX) Fasc. 4A, p35-

38, 4 1011-2855 www.tuiasi.ro/facultati/ic/index.php?file=4025

Mecanica/ Mecatronica B

9 iulie

Moldovan Cristian-Emil, Perju Dan, Maniu Inocentiu, Vatau

Steliana, Ciupe Valentin

Analysis of a centrode mechanism with an eccentric element

“Robotica & Management” International Journal vol.15, no.1, 33-37, 4 1453-2069 http://www.robotica-

management.uem.roMecanica/

Mecatronica B+

10 iulie Ciontos Ovidiu, Vatau Steliana

Control of Nonlinear Mechatronic Systems

The International Journal Robotica & Management vol.15, no.1, 55, 4 1453-2069 http://robotica-


Mecatronica B+

11 octombrie Joni N., Dobra A. Specialized Positioners and Manipulators for Robotic Welding Solid State Phenomena Volumes 166 - 167 235-240, 6

978-3-908451-88-

4

http://www.scientific.net/SSP.166-167/2 Extern B+

12 noiembrie Argesanu Veronica, I. Farkas, I. Laza, M. Jula Sealing design in machine building

Annals of Faculty Engineering – Journal of Engineering, Hunedoara INTERNATIONAL

SYMPOSIUM ON ADVANCE ENGINEERING AND APPLIED MANAGEMENT – 40TH

ANNIVERSARY IN HIGHER EDUCATION, HUNEDOARA ROMANIA, ISBN 978-973-0-

09340-7

S3-09, 6 978-973-0-09340-7

http://acta.fih.upt.ro/pdf/2010-2/ACTA-2010-2-

Event-09.pdf


13 noiembrieI. Borozan, Argesanu

Veronica, R. Kulcsar, I. Laza

About the tensioning of the belt drives

Annals of Faculty Engineering – Journal of Engineering, Hunedoara INTERNATIONAL

SYMPOSIUM ON ADVANCE ENGINEERING AN APPLIED MANAGEMENT – 40TH

ANNIVERSARY IN HIGHER EDUCATION, HUNEDOARA ROMANIA, ISBN 978-973-0-

09340-7

S3-14, 6 978-973-0-09340-7

http://acta.fih.upt.ro/pdf/2010-2/ACTA-2010-2-

Event-09.pdf


14 decembrieVatau Steliana, Ciupe V., Moldovan C.-E.,

Maniu I.

A Mechatronic System for Rehabilitation of Wrist

The International Journal Robotica & Management vol.15, no.2, 53, 4 1453-2069 http://robotica-


Mecatronica B+

http://www.tuiasi.ro/facultati/ic/index.php?file=4025�

http://www.tuiasi.ro/facultati/ic/index.php?file=4025�

http://www.robotica-management.uem.ro/�

http://www.robotica-management.uem.ro/�

http://robotica-management.uem.ro/�




http://acta.fih.upt.ro/pdf/2010-2/ACTA-2010-2-Event-09.pdf�









Conferinta internationala (nume, loc si perioada de

desfasurare)

Volumul in care a fost publicata lucrarea

Pagina, nr. pagini ISBN Site web

conferinta


1 maiR. Sofronia, A. Davidescu, G.

Savii

Development of an efficient haptic

system for tooth processing

OPTIROB 2010, Calimanesti, mai 2010

Proceedings of the Fifth International Conference on Optimization of the Robots

and Manipulators

13, 5 978-14244-7431-8

http://www.optirob2010


2 septembrie

Ghiba Mihai Ovidiu,

Dreucean Mircea,

Prejbeanu Radu,

Vermesan Dinu

Rapid Prototyping in the Creation o fHip Implants with 3D Lattice Structures

RaDMI 2010, Donji Milanovac, Serbia, 16-19 Septembrie 2010

Proceedings of 10th International Conference

"Research and Development in Mechanical Industry" – RaDMI 2010, Volume 1

259, 4 978-86-6075-017-6 www.radmi.org Mecanica/

Mecatronica

3 septembrie

Craciun Andrei, Dreucean Mircea,

Ioanovici Teodora

Quality Assurance for the Medical Act by Modular Remote

Intensive Care Telemedicine

System

RaDMI 2010, Donji Milanovac, Serbia, 16-19 Septembrie 2010

Proceedings of 10th International Conference

"Research and Development in Mechanical Industry" – RaDMI 2010, Volume 2

106, 4 978-86-6075-018-3 www.radmi.org Mecanica/

Mecatronica

4 octombrie

M. Voinescu, A. Sabaleuski, K.

Berdich, A. Davidescu, V.

Argeşanu

Comparative study between normal and

transtibial gate

The 21st International DAAAM Symposium, 20-23 Oct. 2010, Zadar,

Croatia

Annals of DAAAM for 2010 & PROCEEDINGS 637, 2 1726-9680 http://www.daaam.

com/Mecanica/

Mecatronica

5 octombrie

M. Voinescu, A. Davidescu, C.

Florea, K. Berdich

Automatic syncronization for

gait data using Matlab

Applied Computing Conference 2010 (AAC'10), Timisoara, October 21-

23,2010

Proceedings of the Third Applied Computing

Conference39, 4 1792-5908

http://www.wseas.us/conferences/2010/timisoara/acc/


6 octombrie

Voicu M-C, Schmidt R, Lammen B,

Maniu Inocentiu

Measuring the Nip Forces in Roller Systems Using

Piezoelectric Paint

The 21st International DAAAM Symposium, 20-23rd October 2010,

Zadar, Croatia

Annals and Proceedings of the 21st International DAAAM Symposium, 20-23rd October

2010, Zadar, Croatia

961-962, 2

ISSN 1726-9679; ISBN

978-3-901509-73-5

www.daaam.com Mecanica/ Mecatronica

7 octombrie

C. A. Szuhanek, A. Cernescu, N. Faur, T. Fleser, A. Cheveresan, Vatau Steliana

NUMERICAL SIMULATION OF ORTHODONTIC

FORCES EFFECTS IN BONE LOSS

CASES

Annals of DAAAM for 2010 & Proceedings ISI of the 21th

International DAAAM SymposiumAnnals of DAAAM for 2010 729, 2 978-3-

901509-73-5 www.daaam.com

FACULTATEA DE MEDICINA DENTARA - Mecanica/

Mecatronica

Lucrari publicate la conferinte internationale neindexate ISI / BDI

http://www.optirob2010/�

http://www.optirob2010/�

http://www.radmi.org/�

http://www.radmi.org/�



8 octombrie Mateas Mariu, Ianosi Endre

Flash flood warning system for small

rural communitiesISIRR 2010 CD 978-963-508-

600-9 www.isirr2010.hu Mecanica/ Mecatronica

9 noiembrie Ianosi Endre

Considerations about food safety

management systems auditing

International Conference on Science and Technique in the Agri-Food

business - ICOSTAF 2010, Szeged, 3-4 November 2010

Review of Faculty of Engineering - Analecta Technica Szegedinesia

104, 6 1788-6392 www.icostaf2010.mustra.hu


10 decembrieV. Socoliuc, A. Taculescu, A.

Dobra, sa

Clustering in Water Based Magnetic

Nanofluids: Investigations by Light Scattering

Methods

8TH INTERNATIONAL CONFERENCE ON THE SCIENTIFIC AND CLINICAL

APPLICATIONS OF MAGNETIC CARRIERS; doi:10.1063/1.3530065

Volume 1311, pp. 89-95 6

ISBN 978-0-7354-0866-

1; ISSN 0094-243X

http://scitation.aip.org/vsearch/servlet/VerityServlet?KEY=ALL&possible1=Dobra,+Andreea&possible1zone=author&maxdisp=25&smode=strresults

&aqs=true

Academia Romana - Mecanica/

Mecatronica

http://www.isirr2010.hu/�

http://www.icostaf2010.mustra.hu/�

http://www.icostaf2010.mustra.hu/�

http://scitation.aip.org/dbt/dbt.jsp?KEY=APCPCS&Volume=1311�

http://scitation.aip.org/vsearch/servlet/VerityServlet?KEY=ALL&possible1=Dobra,+Andreea&possible1zone=author&maxdisp=25&smode=strresults&aqs=true�










Conferinta nationala / simpozionul (nume, loc si perioada de

desfasurare)

Volumul in care a fost publicata lucrarea

Pagina, nr. pagini ISBN Site web conferinta


1 mai

Ghiba Mihai Ovidiu,

Dreucean Mircea,

Prejbeanu Radu,

Vermesan Dinu

Elastic Behavior of Lattice

Structures for Orthopedic

Implants

ADEM 2010, 1st International Conference Advances in Management of Technological

Systems, Drobeta Tr. Severin, May 19-21, 2010

Book of Abstracts, 1st International Conference

Advances in Management, University of Craiova

125, 2 978-606-510-899-8

http://trade-metal.com/adem-2010-p6914.html


Lucrari publicate la conferinte nationale, simpozioane, etc.

http://trade-metal.com/adem-2010-p6914.html�

http://trade-metal.com/adem-2010-p6914.html�

Nr. crt. Autor(i) Titlu

Tipul cartii (monografie, tratat, manual pt studenti,

etc)

Editura care a publicat cartea

Numar total

pagini

Numar pagini

contributieISBN Site web

editura


Nr. crt. Autor(i) carte Titlu carte


etc)


Numar total

pagini

Autor(i) capitol Titlu capitol Numar pagini

contributie ISBN Site web edituraFacultate /


Nr. crt. Autor(i) Titlu


etc)


Numar total

pagini

Numar pagini

contributieISBN Site web

editura


Clasificare CNCSIS a editurii / 2010

1 Dolga Valer Mecatronica. Teoria sistemelor Monografie Politehnica 357 357 978-606-554-235-8 http://www.editura-

politehnica.ro/ Mecanica/ mecatronica cod 186 CNCSIS

2Argesanu

Veronica, V. Văcărescu

Ergoinginerie. Aplicaţii în medicina dentară Manual pt studenti Ed. Eurostampa 385 200/185 978-606-569-158-2 http://www.eurostam

pa.ro/ Mecanica/ mecatronica

COD 184 (http://edituralumen.ro/w

p-content/uploads/2010/04

/edituri_2010-recreaditare.pdf)

1. Carti publicate in edituri din strainatate

3. Carti publicate in edituri din tara

2. Capitole in carti publicate in edituri din strainatate

Nr. crt.

Anul citarii

Luna citarii Autor(i) Titlul lucrarii citate

Revista / volumul in care a fost publicata lucrarea,

inclusiv an

ISSN / ISBN

Revista / volumul in care a fost citata lucrarea (nume, volum, pag.) Autori / titlu lucrare care citeaza ISSN /

ISBN

1 2010 februarie Dolga Valer, Dolga Lia

Modeling and Simulation of a Magnetic Levitation

System

ANNALS of the ORADEA UNIVERSITY. Fascicle of

Management and Technological Engineering,

Volume VI (XVI), 2007

1583-0691

Proceeding ISPRA'10 Proceedings of the 9th WSEAS international

conference on Signal processing, robotics and automation

Ahmad, I., Muhammad, A., Nonlinear model & controller design for magnetic levitation system

978-960-474-157-

1

2 2010 februarie

K.-H. Modler, E.-C. Lovasz, G.F. Bär, R. Neumann, D. Perju,

M. Perner, D. Mărgineanu

General method for the synthesis of geared linkages with non-

circular gears

Mechanism and Machine Theory, 44 (2009) 726-738,

2009

0094-114X

Mechanism and Machine Theory 45 (2010), pp. 273-290

Use of shape invariants in optimal synthesis of geared five-bar linkage

0094-114X

3 2010 noiembrie Dolga Valer, Dolga Lia

Modeling and Simulation of a Magnetic Levitation

System

ANNALS of the ORADEA UNIVERSITY. Fascicle of

Management and Technological Engineering,

Volume VI (XVI), 2007

1583-0691

International Journal of Computers Applications, nr. 2, 2010

Mrunal, D, Mathur, B., Modeling of Actuator and Position Sensors for

Attraction Type Magnetic Levitation System

1356-1830

Citari in literatura de specialitate in cursul anului 2010

Nr. crt.

Data acordarii brevetului

Nr. brevet Titlu brevet Titular brevet Autor(i) Institutia care a acordat brevetul

Brevet national

Brevet international

Domeniu de aplicabilitate

Numar de citari in sistemul ISI

1 Inregistrat 12.11.2010 A/01101

Dispozitiv mecatronic de determinare a solicitarilor

intervertebraleArgesanu Veronica Argesanu Veronica,

M. Jula OSIM x Medicina dentara 0

2 Inregistrat 12.11.2010 A/01102

Sistem ergomecatronic de urmarire a miscarilor

capului umanArgesanu Veronica Argesanu Veronica, A.

Diaconu, M. Jula OSIM x Medicina dentara 0

Brevete de inventie

Nr. crt. Numele si prenumele Pozitia (membru colectiv

redactie / recenzor)

Perioada membru colectiv redactie /

recenzorTitlul revistei / editor Site web revista ISSN





1 Argesanu Veronica membru colectiv redactie si recenzor 2007-2010 s.a.m.d Journal Oral Health and

Dental Management

http://journals.indexcopernicus.com/karta.php?action=master

list&id=4593

1583-5588





Observatii (recunoastere CNCSIS

sau similare)

1 Lovasz Erwin-Christian recenzor 2009

Bulletin of the Transilvania University of Braşov, Vol. 2

(51) - 2009, Series I: Engineering Sciences

http://but.unitbv.ro/BU2007/index.htm

2065-2119 B

1. Membrii colective de redacţie reviste cotate ISI

2. Membrii colective de redacţie reviste indexate BDI

3. Membrii colective de redacţie alte reviste

http://journals.indexcopernicus.com/karta.php?action=masterlist&id=4593�



Nr. crt.

Numele si prenumele

Pozitia (membru comitet organizare

/ recenzor)

Numele conferintei, loc si perioada de

desfasurare

Organizatia profesionala /

Institutia organizatoare

ISBN volum conferinta

Site web conferinta

Observatii (cotare conferinta sau

volum)

1 Maniu Inocentiu Membru in comitetul international

2010 International Conference on Robotics

Universitatea Tehnica din Cluj-Napoca

13 978-3-908451-88-4

http://robotics10.utcluj.ro

2 Lovasz Erwin-Christian Recenzor EUCOMES IFToMM / UT Cluj-Napoca 978-90-481-9688-

3


htmlISI; Springer Link

Nr. crt.

Numele si prenumele

Pozitia (membru comitet organizare

/ recenzor)

Numele conferintei, loc si perioada de

desfasurare

Organizatia profesionala /

Institutia organizatoare

ISBN volum conferinta

Site web conferinta

Observatii (cotare conferinta sau

volum)

1 Argesanu Veronica Chairman/ Scientific Commite

International Symposium On Advance Engineering

And Applied Management – 40Th Anniversary In Higher

Education, Hunedoara, Romania, Nov.

Faculty Of Engineering Hunedoara And General Association Of Romanian Engineers (Agir) – Branch

Of Hunedoara

978-973-0-09340-7

http://acta.fih.upt.ro/pdf/2010-2/ACTA-

2010-2-Event-09.pdf

2 Ianosi Endre Presedinte sectiune - ing

ISIRR 2010, Szeged, 13-15 Oct.

Academia de Stiinte Ungara

978-963-508-600-9 www.isirr2010.hu

1. Membrii comitete organizare conferinte internationale

2. Membrii comitete organizare conferinte nationale




Nr. crt. Nume si prenume Tipul premiului / distinctiei

Organizatia care a decernat premiul /

distinctia

Lucrarea / proiectul pentru care a fost decernat premiul /

distinctia

Nr. crt. Nume si prenume Tipul premiului / distinctiei

Organizatia care a decernat premiul /

distinctia

Lucrarea / proiectul pentru care a fost decernat premiul /

distinctia

Nr. crt. Nume si prenume Numele complet al Academiei Perioada de cand este

membru Site web academie

Nr. crt. Nume si prenume Universitatea Data acordarii titlului Site web universitate

Nr. crt. Nume si prenume Organizatia profesionala Pozitia de conducere De cand este in pozitie de

conducereSite web organizatie

profesionala1 Lovasz Erwin-Christian ARoTMM Secretar Stiintific 1997 http://www.arotmm.ro/

Nr. crt. Nume si prenume Organizatia profesionala De cand este membru Site web organizatie

profesionala1 Dolga Valer IEEE Robotics and Automation Society 2008 www.ieee.org/2 Ciupe Valentin Societatea Romana de Robotica, SRR 2004 http://www.robotics-society.ro/

3 Ciupe Valentin Asociatia Romana de Stiinta Mecanismelor si Masinilor, ARoTMM 2008 http://www.arotmm.ro/

4 Ciupe Valentin Societatea omana de Mecatronica, Sromeca 2004 -

5 Dreucean Mircea Asociatia romana pentru Teoria Masinilor si a Mecanismelor ARoTMM 1992 http://www.arotmm.ro

6 Dreucean Mircea Societatea de Robotica din Romania SRR 1996 http://www.robotics-society.ro/

7 Dreucean Mircea Asociatia Romana de Transmisii Mecanice ROAMET 1994 http://www.roamet.pub.ro/

1. Premii / distinctii internationale

5. Pozitii de conducere in organizatii profesionale internationale / nationale

6. Membru in organizatii profesionale internationale / nationale

4. Doctor Honoris Causa al unor universitati de prestigiu

3. Membru al Academiei Romane, al academiilor de ramura si al academiilor din strainatate

2. Premii / distinctii nationale

http://www.ieee.org/�

http://www.arotmm.ro/�

http://www.robotics-society.ro/�

http://www.roamet.pub.ro/�

8 Maniu Inocentiu Societatea Romana de Robotica 1992 www.robotics-society.ro

9 Maniu Inocentiu Asociaţia Romană de Ştiinţa Mecanismelor şi Maşinilor 2000 www.arotmm.ro

10 Maniu Inocentiu Societatea Romana de Mecatronica 2000

11 Davidescu Arjana Asociatia romana pentru Teoria Masinilor si a Mecanismelor ARoTMM 1992 http://www.arotmm.ro

12 Ianosi Endre Experti CDI 2004 www.experti-cdi.ro13 Ianosi Endre Lead Auditor e.com-Cert 2009 www.ecomcert.org

14 Ianosi Endre Public Body of the Hungarian Academy of Sciences 2004 mta.hu

15 Lovasz Erwin-Christian IFToMM 1994 http://130.15.85.212/16 Lovasz Erwin-Christian IFToMM 1997 http://130.15.85.212/

17 Vacarescu Valeria Asociatia Romana de Stiinta Mecanismelor si Masinilor - AROTMM 1985 http://www.arotmm.ro

18 Vacarescu Valeria SRR 1990 http://www.robotics-society.ro/19 Vacarescu Valeria AGIR 1998 http://www.agir.ro20 Sticlaru Carmen ROAMET 1998 http://www.roamet.pub.ro/

21 Voda Mircea Asociaţia de Sudură din România (ASR) 1994-prezent http://www.asr.ro/

Voda Mircea Societatea Română de Grafică Inginerească 2007-prezent http://www.sorging.ro/

Dolga Lia

Asociaţia Română pentru Teoria Mecanismelor şi Maşinilor (ARoTMM),

afiliată la Federaţia Internaţională pentru Teoria Mecanismelor şi Maşinilor

(IFToMM), Milano

2000 www.arotmm.ro

24 Dolga Lia Romanian Society of Mechatronics SROMECA 2003-prezent nu exista

25 Dolga Lia IEE External examiner, for CAD domain 2009 www.ieee.org/

Saftencu Doina



(IFToMM), Milano

1998 www.arotmm.ro

27 Saftencu Doina Asociaţia Generală a Inginerilor din România (AGIR) 1996 http://www.agir.ro

28 Saftencu Doina Societatea Română de Robotică (SRR) 1996 http://www.robotics-society.ro/

29 Zăbavă Eugen



(IFToMM), Milano

2008 www.arotmm.ro

30 Zăbavă Eugen Asociaţia de Sudură din România (ASR) 2008 http://www.asr.ro/

31 Filipescu Hannelore Asociaţia Generală a Inginerilor din România (AGIR) 2005 http://www.agir.ro

Nr. crt. Nume si prenume Universitatea Perioada Site web universitate

1 Lovasz Erwin-Christian Technische Universität Dresden aprilie 2010 http://tu-dresden.de/

2 VODA Mircea Universitatea de Stiinte Tehnice IUT "A" Lille-Franta 1998-prezent http://www-iut.univ-lille1.fr/

7. Profesor invitat la universitati de prestigiu

http://www.robotics-society.ro/�



http://www.experti-cdi.ro/�

http://www.ecomcert.org/�


http://www.ieee.org/�



Nr. crt. Nume si prenume Domeniul

Anul dobandirii calitatii de conducator

doctorat

Doctoranzi in stagiu (nume si prenume)

Forma de studiu (frecventa, ff, strain) Tema de cercetare

Nicolaie Costel ff Contributii privind imbunatatirea performantelor corsetelor ortopedice

Voinescu Mihai frecventa Contributii privind cresterea performantelor protezelor transtibiale

Sofronia Raluca frecventa Contributii privind modelarea comportamentului materialelor cu proprietati complexe in realitate virtuala

Pop Cristian frecventa Aplicatii ale vederii artificiale in comanda robotilor de montaj

Tilneac Mihaela frecventa Analiza posibilitatilor de utilizare a robotilor in agricultura

Bitea Alin frecventa Studiul comportarii robotilor mobili intr-un mediu cu obstacole

Ciontos Ovidiu frecventa Neliniaritatile din sistemele mecatronice si aplicatii pentru pendulul invers

Moldovan Florentina frecventa Analiza si optimizarea unui mecanism pasitor

Gorie Nina frecventa Analiza posibilitatilor de utilizare a senzorilor ultarsonici in biomecatronica

Mondoc Alina frecventa Modele statistice in studiul robotilor mobili pentru medii cu obstacole

Teodorescu Adriana fara frecventa Studiul neliniaritatilor din sistemele mecatronice

Vancu Alexandru fara frecventa Analiza si optimizarea unei proteze de picior

Craciun Andrei frecventa Sisteme e-MedicinePopescu Ionut ff Sisteme logistice in analiza de trafic

Florea Cristina frecventa Metode de investigare a proprietatilor mecanice ale tesuturilor

Pernevan Silvia frecventa Studiul biocompozitelor pe baza de plante liberiene

Voicu Claudia ff Simularea si modelarea sistemelor active cu valturi

Pasca Gheorghe frecventa Contributii privind automatizarea sudurilor instalatiilor criogenice

Comsa Andrei frecventa Automatizarea procesului de scanare a cartilor in biblioteci digitale

Borozan Ionut frecventa Optimizarea constructiv-functionala a cutiilor de viteza automate

Bistrian Diana Alina ffModele matematice si algoritmi numerici pentru

investigarea stabilitatii sistemelor hidrodinamice cu vartejuri

Chis Violeta Eugenia ff Metode şi algoritmi pentru simularea în sistemele electroenergetice

Neicu Marian ff Metode si algoritmi pentru sisteme informatice suport ale administrarii afacerii

Sofronia Raluca frecventa Contributii privind modelarea comportamentului materialelor cu proprietati complexe in realitate virtuala

20071

20093

Conducere de doctorat

Savii George5 Calculatoare si tehnologia informatiei 1994

Davidescu Arjana Inginerie Mecanica

Maniu Inocentiu Inginerie Mecanica 20084

Dolga Valer Inginerie Mecanica2 2008

Dreucean Mircea Inginerie Mecanica

Nr. crt.

Nume si prenume conducator Domeniul Autor teza (nume

si prenume) Titlul tezei Data sustinerii

1 prof.dr.ing. Madaras Lucian Inginerie mecanica Vela Daniel-GheorgheContributii la perfectionarea

functional-constructiva a transmisiilor armonice

10.12.2010

2 prof.dr.ing. Gligor Octavian Inginerie mecanica Fernengel Vilmos

Contributii la sistemele de detectare si comanda pentru

protectia persoanelor in cazul coliziunii automobilelor

10.12.2011

3 prof.dr.ing. Nicoara ioan Inginerie mecanica Gugoasa-Garaiman Alis

Contributii privind implementarea unor tehnici noninvazive avansate de

investigatie a deformatiilor de coloana vertebrala

10.07.2010

4 prof.dr.ing. Perju Dan Inginerie mecanica Silaghi FlorinContributii la ridicarea

performantelor functionale ale contoarelor pentru lichide

26.06.2010

5 prof.dr.ing. Savii George Calculatoare si tehnologia informatiei

Pentelic-Cotosman Dumitru

Sistem informatic pentru invatamantul la distanta in domeniul artelor vizuale

29.10.2010

Teze sustinute in 2010

Date post:	13-Feb-2018
Category:	Documents
Upload:	lemien
View:	265 times
Download:	4 times

Universitatea Politehnica din Timisoara Nr. · PDF fileCorina, Mesaros-Anghel Voicu, Argesanu...

Documents