UNIVERSITATEA TEHNICA ˘ din CLUJ-NAPOCA FACULTATEA CONSTRUCT II de MAS INI DEPARTAMENTUL INGINERIA SISTEMELOR MECANICE Prof. dr. ing. ANTAL Tiberiu Alexandru B-dul Muncii, nr. 103-105, 3400, CLUJ-NAPOCA, ROMÂNIA ☎: 0040-264-401667 E-mail: [email protected]WEB: http://www.east.utcluj.ro/mb/mep/antal/index.htm Lista lucra ˘ rilor publicate I. Îndruma ˘ toare de laborator 1. MARCU, V., ANTAL, T., BOTA, D., AutoCAD - Îndruma ˘ tor de laborator, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.104. 2. MARCU, V., ARGHIR, M., MORAR, S., ANTAL, T. , Informatica ˘ tehnicã, vol. 1 - Lucra ˘ ri de laborator, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.83. 3. ANTAL, T. A., Elemente de Java cu JDeveloper - îndrumător de laborator, Editura UTPRES, 2013, p.150, ISBN: 978-973-662-827-6 4. ANTAL, T. A., Java - Iniţiere - îndrumător de laborator, Editura UTPRES, 2013, p. 246, ISBN: 978-973-662-832-0. II. Cursuri universitare l. MARCU, V., ANTAL, T., MORAR, S., PLITEA, D., LUPEA, L, BERTEAN, M., Informatica ˘ tehnica ˘ , volumul l, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.321. III. Ca ˘ rt i 1. MARCU, V., ORLANDEA, C., ANTAL, T. , Wordperfect pentru documente tehnice, Editura DACIA, 1994, p. 166, ISBN 973-350520-X. 2. TIUCA ˘ , T., PRECUP, T., ANTAL, T., Dezvoltarea aplicat iilor cu AutoCAD şi AutoLISP, Editura Promedia Plus Computers, 1995, p. 303, ISBN 973-96862-2-2. 3. ANTAL Tiberiu Alexandru, Microsoft Access 97 şi 2000 în 14 cursuri, Editura Todesco, 2000, p. 299, ISBN 973-99779-6-0. 4. ANTAL Tiberiu Alexandru, Limbajul C ANSI, Editura RISOPRINT, 2001, p. 253, ISBN 973-656-065-1. 5. ANTAL Tiberiu Alexandru, Proiectarea paginilor Web cu HTML, VBScript s i ASP, Editura RISOPRINT, 2003, p.224, ISBN 973-656-361-8. 6. ANTAL Tiberiu Alexandru, Visual BASIC pentru ingineri, Editura RISOPRINT, 2003, p.244, ISBN 973-656-514-9. 7. Adalbert ANTAL, Gheorghe KEREKES, Tiberiu ANTAL, Ovidiu TATARU, Horia GORGOI, Zahnradgetriebe – Transmisii cu rot i dint at e, 2004, p. 221, UTPRES, ISBN – 973-662-142-1. 8. ANTAL Tiberiu Alexandru, Proiectarea paginilor Web cu HTML, VBScript s i ASP - edit ia a II-a, Editura RISOPRINT, 2006, p.264, ISBN 973-751-349-5. IV. Lista lucra ˘ rilor s tiint ifice publicate 1992 l. ANTAL, A., ANTAL, T. , Egalizarea aluneca ˘ rilor, între flancurile dint ilor, în punctele de angrenare unipare, MTM VI Timis oara, Simpozion Nat ional, Transmisii mecanice, Volumul 2, lucrarea 19, 1992, p. 19.1-19.12 1993 1
Transcript
UNIVERSITATEA TEHNICA din CLUJ-NAPOCAFACULTATEA CONSTRUCTII de MASINIDEPARTAMENTUL INGINERIA SISTEMELOR MECANICEProf. dr. ing. ANTAL Tiberiu AlexandruB-dul Muncii, nr. 103-105, 3400, CLUJ-NAPOCA, ROMÂNIA☎: 0040-264-401667E-mail: [email protected]: http://www.east.utcluj.ro/mb/mep/antal/index.htm
Lista lucrarilor publicateI. Îndrumatoare de laborator1. MARCU, V., ANTAL, T., BOTA, D., AutoCAD - Îndrumator de laborator, At. de
multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.104.2. MARCU, V., ARGHIR, M., MORAR, S., ANTAL, T., Informatica tehnicã, vol. 1 -
Lucrari de laborator, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995, p.83.3. ANTAL, T. A., Elemente de Java cu JDeveloper - îndrumător de laborator, Editura
UTPRES, 2013, p.150, ISBN: 978-973-662-827-64. ANTAL, T. A., Java - Iniţiere - îndrumător de laborator, Editura UTPRES, 2013, p.
246, ISBN: 978-973-662-832-0.
II. Cursuri universitarel. MARCU, V., ANTAL, T., MORAR, S., PLITEA, D., LUPEA, L, BERTEAN, M.,
Informatica tehnica, volumul l, At. de multiplicare al Univ. Tehnice Cluj-Napoca, 1995,p.321.
III. Carti1. MARCU, V., ORLANDEA, C., ANTAL, T., Wordperfect pentru documente tehnice,
Editura DACIA, 1994, p. 166, ISBN 973-350520-X.2. TIUCA, T., PRECUP, T., ANTAL, T., Dezvoltarea aplicatiilor cu AutoCAD şi
AutoLISP, Editura Promedia Plus Computers, 1995, p. 303, ISBN 973-96862-2-2.3. ANTAL Tiberiu Alexandru, Microsoft Access 97 şi 2000 în 14 cursuri, Editura
Todesco, 2000, p. 299, ISBN 973-99779-6-0. 4. ANTAL Tiberiu Alexandru, Limbajul C ANSI, Editura RISOPRINT, 2001, p. 253,
ISBN 973-656-065-1.5. ANTAL Tiberiu Alexandru, Proiectarea paginilor Web cu HTML, VBScript si ASP,
Editura RISOPRINT, 2003, p.224, ISBN 973-656-361-8.6. ANTAL Tiberiu Alexandru, Visual BASIC pentru ingineri, Editura RISOPRINT, 2003,
p.244, ISBN 973-656-514-9.7. Adalbert ANTAL, Gheorghe KEREKES, Tiberiu ANTAL, Ovidiu TATARU, Horia
GORGOI, Zahnradgetriebe – Transmisii cu roti dintate, 2004, p. 221, UTPRES, ISBN– 973-662-142-1.
8. ANTAL Tiberiu Alexandru, Proiectarea paginilor Web cu HTML, VBScript si ASP -editia a II-a, Editura RISOPRINT, 2006, p.264, ISBN 973-751-349-5.
IV. Lista lucrarilor stiintifice publicate
1992l. ANTAL, A., ANTAL, T., Egalizarea alunecarilor, între flancurile dintilor, în punctele
de angrenare unipare, MTM VI Timisoara, Simpozion National, Transmisii mecanice,Volumul 2, lucrarea 19, 1992, p. 19.1-19.12
1993
1
2. ANTAL, T., PÎSLA, A., Software interface to create access of the numerical controlledmachine tools at the CAD/CAM specialised software. 4th international DAAAMSymposium, Technical University of Brno, Czechia, 16-18 September 1993, Separat-Nr.:02.
3. ANTAL, A., ANTAL, T., Un program de calcul pentru angrenajele melcate. MTM '93Cugir-Romania, a II-a conferinta stiintifica internationala masini si tehnologiimoderne, Constructia de Masini nr. 10-11-12, 14-16 octombrie 1993, p.27-29.
19944. PÎSLA, A., ANTAL, T., PLITEA, D., Studies concerning the design of an CAD/CAM
software dedicated to the flexibilisation of the classical NC machine tool, 5.thInternational DAAAM Symposium, University of Maribor - Slovenia, 27-29th October1994, p.345-346.
5. PÎSLA, A., COMSA, S., ANTAL, T., Studies concerning the design of the variableelasticity piston rings, 5.th International DAAAM Symposium, University of Maribor -Slovenia, 27-29th October 1994, p.347-348.
19956. NAGY, K., PÎSLA, A., ANTAL, T., Szerszámgépek tengelyeinek szamítógéppel való
vezérlesé, microCAD '95, International Computer Science Conference, Section F:Production engineering, manufacturing systems, 23th February 1995, p.121-126.
7. ANTAL T., PÎSLA, A., CAD/CAM manufacturing software on CNC milling machineswith horizontal and vertical axle, microCAD '95, International Computer ScienceConference, Section F: Production engineering, manufacturing systems, 23th February1995, p.79-82.
8. GYENGE, Cs., ANCAU, M., ANTAL, T., KEREKES, L., Allgemeiner Algorithmus furdie Festlegung der optimalen Bearbeitungsreihenfolge in flexiblenFertigungssystemen, Automation und Messtechnik, Austria, 4/1995, p.162-164.
9. ANTAL, A., ANTAL, T., Posibilitati de optimizare a parametrilor geometrici laangrenajele elicoidale, MTeM '95, Cugir, A III-a conferinta stiintifica internationalamasini si tehnologii moderne, Volumul l, 12-14 octombrie 1995, p.l-4.
10. ANTAL, A., ANTAL, T., Modszer a csavakereker méreteinek optimális meghatározása.Conferinta Internationala de Inginerie Mecanica - OGÉT '95, Cluj-Napoca / Kolozsvár.1995 aprilie 8, p.1-7.
11. NAGY, K., MORAR, L., POPESCU, S., PÎSLA, A., ANTAL, T., Comanda în viteza sipozitie a axelor numerice utilizând calculatoare PC, MTeM '95 - Cugir, România, A II-aConferinta stiintifica internationala masini si tehnologii moderne, Volumul 1, 12-14octombrie 1995, p.321-324.
12. PÎSLA, A., ANTAL, T., PÎSLA, D., Programarea asistata de calculator a robotilordestinati acoperirilor prin proiectare termica de pulberi, stiinta si tehnologie, industrie- Simpozion organizat în cadrul Zilelor Academice Clujene, 27 octombrie 1995, p.101-104.
199613. ANTAL, A., ANTAL, T., Methods for choosing the addendum modification,
microCAD'96, International Computer Science Conference 29th February 1996,Miskolc, Hungary, p. 39 - 43.
14. K. NAGY, A. PISLA, T. ANTAL, A. LÁSZLÓ, The Parallell Control of Two NumericalAxes Using Personal Computer, microCAD'96, International Computer ScienceConference 29th February 1996, poster.
15. NAGY, K., MORAR, L., POPESCU, S., PÎSLA, A., ANTAL, T., LASZLO, A., Hardwareaspects concerning the speed and position control of numerical axes using a personalcomputer, A'96-THETA 10 A3 Section - Intelligent motion control. Robotics. IntelligentManufacturing systems. CAD Cluj-Napoca, 23-24 May 1996 p.333-336.
2
199816. ANTAL, A., ANTAL, T., Program de calcul pentru alunecarile în angrenajele
elicoidale. PRASIC '98 - SIMPOZIONUL NATIONAL cu participare internationala,Braşov, Vol. II - Organe de Masini. Transmisii Mecanice, 5-7 Noiembrie 1998, p.235-238, ISBN 973-98796-0-8.
199917. ANTAL, A., ANTAL, T., A csavarkerekek számítása kiegyenlitett relativ csúszásra.
Conferinta Internationala de Inginerie Mecanica - OGÉT '99 - VII. Országos GépészTalálkozó, Felixfürdő, 1999. április 23-25., p.60-63, ISBN 9739203426.
18. ANTAL, T. A., Planar mechanism synthesis using genetic algorithms, Acta TechnicaNapocensis, Series: Applied Mathematics and Mechanics. No. 42, Vol. II, 1999, p.55-60, U. T. PRESS - The Technical University form Cluj-Napoca, Romania, ISSN 1221-5872.
200019. ANTAL, A., ANTAL, T. A., Program a fogprofilok közótt fellépő csúszási tényezők
sebességének számítására, Conferinta Internationala de Inginerie Mecanica - VIII.OGÉT (Országos Gépész Találkozó), 2000 aprilie/április 7-9, p. 116-119, Târgu-Mures/Marosvásárhely, Románia.
20. ANTAL, A., ANTAL, T. A., A computer program for the sliding equalizing at thehelical gears, The 8-th Symposium on Mechanisms and Mechanical Transmissions -with international participation, p.17-22, 19-22 October 2000, Timisoara, România,ISBN: 973-585-179-2; 973-585-181-4.
200121. ANTAL, B., MIKES, I., ANTAL, T. A., A kúpkerekek fogazása metszőkerékkel,
Conferinta Internationala de Inginerie Mecanica - OGÉT '2001 - IX. Országos GépészTalálkozó. Kolozsvár. 2001. április 26-28, p.31-37, ISSN 1454-0746.
22. ANTAL, B., ANTAL, T. A., Fogaskerékhajtások fogfelütelei között megjelenőcsúszások meghatározása, Conferinta Internationala de Inginerie Mecanica - OGÉT'2001 - IX. Országos Gépész Találkozó. Kolozsvár. 2001. április 26-28, p.13-18, ISSN1454-0746.
200223. MIKES, I., ANTAL, T. A., A marási mélység meghatarozasa ferdefogú evolvens-
kúpkerekel esteben. Conferinta Internationala de Inginerie Mecanica - OGÉT '2002 -X. Országos Gépész Találkozó. Szekelyudvarhely. 2002. április 25-28, p.195-199, ISSN1454-0746.
24. ANTAL, B., MIKES, I., ANTAL, T. A., Kúpkerekek fogazása csigamaróval. ConferintaInternationala de Inginerie Mecanica - OGÉT '2002 - X. Országos Gépész Találkozó.Szekelyudvarhely. 2002. április 25-28, p.36-40, ISSN 1454-0746.
25. BOJAN, ST., ANTAL, T., TATARU, O., BÂRLEANU, C., The determination of theimaginary rack-bar in the case of the spur gearing with curved directix. LucrarileStiintifice ale Simpozionului International "Universitaria ROPET 2002" - InginerieMecanica 2. 17-19 octombrie 2002, Petrosani, p.249-252, Editura FOCUS, ISBN 973-8435-22-6.
26. ANTAL, A., ANTAL, T. A., Studiul angrenarii unui melc cilindric cu o roata dintataconico-evolvetica. PRASIC '02 - Lucrarile celui de al VII-lea SIMPOZION NATIONALCU PARTICIPARE INTERNATIONALA, BRASOV, 7-8 noiembrie 2002, Vol. I -Mecanisme si Tribologie, p.249-252, Editura UNIVERSITATII TRANSILVANIA dinBRASOV, ISBN 973-635-064-9.
27. BOJAN, ST., TATARU, O., BÂRLEANU, C., ANTAL, T. , The equation of the teethflanks surfaces of the curved spur wheels determination. PRASIC '02 - Lucrarile celuide al VII-lea SIMPOZION NATIONAL CU PARTICIPARE INTERNATIONALA,
3
BRASOV, 7-8 noiembrie 2002, Vol. II - Organe de masini. Transmisii mecanice, p.261-264, Editura UNIVERSITATII TRANSILVANIA din BRASOV, ISBN 973-635-064-9
28. BOJAN, St., ANTAL, T., CAZILA, A., TURCU, I., Determination of the meshingequation at the curved spur wheels generation (processing). PRASIC '02 - Lucrarilecelui de al VII-lea SIMPOZION NATIONAL CU PARTICIPARE INTERNATIONALA,BRASOV, 7-8 noiembrie 2002, Vol. II - Organe de masini. Transmisii mecanice, p.251-256, Editura UNIVERSITATII TRANSILVANIA din BRASOV, ISBN 973-635-064-9.
29. ANTAL, T. A., Mechanism displacement analysis with AutoLisp in AutoCAD, Series:Applied Mathematics and Mechanics, Nr. 45, 2002, U. T. PRESS - The TechnicalUniversity form Cluj-Napoca, Romania, p.19-24, ISSN 1221-5872.
30. BOJAN, St., ANTAL, T., TATARU, O., TURCU, I., Programme for the determinationof the imaginary rack-bar in the case of the spur gearing with curved directrix, ActaTehnica Napocensis, Series: Applied Mathemtics and Mecanics, Nr. 45, 2002, U. T.PRESS - The Technical University form Cluj-Napoca, Romania, p.135-140, ISSN 1221-5872.
200331. ANTAL, T. A., The traverse of a tree stored using the relational data model, Acta
Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 46, Vol. 1,2003, p.25-30, ISSN 1221-5872.
32. ANTAL, T. A., ASP component for database access developed in Visual BASIC, ActaTechnica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 46, Vol. 1,2003, p.31-40, ISSN 1221-5872.
33. ANTAL, A., ANTAL, T. A., Ferdefogu kupkerekek fogazasa metszokerekel / Toothingwith wheel-cutter of the helical bevel gears, OGÉT 2003, 11th International Conferencein Mechanical Engineering, Cluj, 8-11 May 2003, p. 15-18, ISBN 973-86097-2-0.
34. BOJAN, St., BÎRLEANU, C., SUCALA, F., ANTAL, T., Generating the cylindrical gearwith curve teeth. Machine tool for this proceeding. MTeM 2003. 6th InternationalConference Modern Technologies in Manufacturing, Technical University from Cluj-Napoca, 2-4 October 2003, p.57-60, ISBN 973-656-490-8.
35. ANTAL, T. A., Visual basic class for simple surface representation with hidden faceremoval, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr.46, Vol. 2, 2003, p.15-24, ISSN 1221-5872.
36. ANTAL, T. A., Surface generation in catia v5r11 defined by parametrical equations invisual basic using activex automation, Acta Technica Napocensis, Series: AppliedMathemathics and Mechanics, Nr. 46, Vol. 2, 2003, p.7-14, ISSN 1221-5872.
200437. ANTAL, T. A., Solid gear generation in autocad using Activex Automation and Visual
Basic, Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr.47, Vol. III, 2004, p.57-62, ISSN 1221-5872.
38. ANTAL, T. A., ACCESS to an ORACLE DATABASE using JDBC, Acta TechnicaNapocensis, Series: Applied Mathemathics and Mechanics, Nr. 47, Vol. III, 2004, p.63-68, ISSN 1221-5872.
39. ANTAL, T. A., Utilization of the relational databases in the storage and retrieval ofmechanisms. Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics,Nr. 47, Vol. IV, 2004, p.7-14, ISSN 1221-5872.
40. ANTAL, T .A., Accesing an ORACLE database from PSP, Acta Technica Napocensis,Series: Applied Mathemathics and Mechanics, Nr. 47, Vol. IV, 2004, p.15-24, ISSN1221-5872.
200541. ANTAL, T. A., ANTAL B., Algoritmus a csigahatások főparamétereinek
meghatározására / Algoritm pentru calculul parametrilor principali ai angrenajelormelcate / Worm gears main parameters design algorithm, Revista Műszaki Szemle, 29szám, p.3-8, 2005, ISSN 1454-0746.
4
42. ANTAL Tibor Sándor, ANTAL Béla, Program a hengeres csigahajtásokteherbírásának optimális számítására / Program for optimized calculation of thecylindrical worm gears load bearing capacity. XIII. Nemzetközi Gépész Talákozó / 13th
International Conference in Mechanical Engineering / A XIII-a ConferintaInternationala de Inginerie Mecanica, OGÉT 2005, Satu Mare, April 28 - May 1, 2005,p. 21-25, ISBN: 973-7840-03-8.
43. ANTAL, T .A., An object based approach to planar mechanisms simulation, ActaTechnica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol. I,2005, p.37-44, ISSN 1221-5872.
44. ANTAL, T .A., Aspects concerning code reusabilty in planar mechanisms simulation,Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol.I, 2005, p.45-50, ISSN 1221-5872.
45. ANTAL, T .A., Accessing ORACLE data from Microsoft Access using ODBC and ADO,Acta Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol.IV, 2005, p.235-242, ISSN 1221-5872.
46. ANTAL, T .A., Data access methods from Visual BASIC to Oracle, Acta TechnicaNapocensis, Series: Applied Mathemathics and Mechanics, Nr. 48, Vol. IV, 2005,p.243-252, ISSN 1221-5872.
47. ANTAL, T. A., CSIBI, V., Mechanizmus generálása SolidEdge-ben Visual Basic-ból /Generarea mecanismelor în SolidEdge din Visual Basic / Mechanism generation inSolidEdge from Visual Basic, Revista Műszaki Szemle, 32 szám, p.3-8, 2005, ISSN1454-0746.
200648. ANTAL Tibor Sándor, ANTAL Béla, Számítási algorítmus a jó hatásfokkal működő
csigahajtások tervezéséhez, Computational algorithm for the design of the goodefficiency wormgears. XIV. Nemzetközi Gépész Talákozó / 14th InternationalConference in Mechanical Engineering / A XIV-a Conferinta Internationala deInginerie Mecanica, OGÉT 2006, Tg. Mures, April 27 - 30, 2006, p. 30-33, ISBN(10):973-7840-10-0.
49. ANTAL, T .A., Midlet Implementation using Eclipse, Acta Technica Napocensis,Series: Applied Mathemathics and Mechanics, Nr. 49, Vol. I, 2006, p.27-36, ISSN 1221-5872.
50. ANTAL, T .A., Using MathCAD for the sliding equalization, at the points where thegearing starts and ends, Acta Technica Napocensis, Series: Applied Mathemathics andMechanics, Nr. 49, Vol. V, 2006, p.51-56, ISSN 1221-5872.
51. ANTAL Tibor Sándor, ANTAL Béla, Egy számítási módszer a hidrodinamikuskenéssel működő csigahajtások esetében / A computational method for thehydrodynamic lubricated worm gears, Revista Műszaki Szemle, 36 szám, p.3-7, 2006,ISSN 1454-0746.
200752. ANTAL Tibor Sándor, ANTAL Béla, A térben kapcsolódó fogfelületek között megjelenő
csúszási tényezők meghatározása / The calculus of the sliding coefficients between theteeth surfaces at space meshing gear, / 15th International Conference in MechanicalEngineering / A XV-a Conferinta Internationala de Inginerie Mecanica, XV OGÉT2007, Kolozsvár, publicat în revista Műszaki Szemle, 38 szám, p.41-44, 2007, ISSN1454-0746.
53. Adalbert ANTAL, Horia GORGOI, Tiberiu Alexandru ANTAL, The generation of thesurfaces for the leadscrew with threaded planetary rollers, ADEMS ‘07 - The 1st
International Conference “Advanced Engineering in Mechanical Systems” - ActaTechnica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 50, vol. II,2006, p.241-244, ISSN 1221-5872.
54. ANTAL, T .A., An object oriented implementation for the study of the sliding
5
equalization, at the points where the gearing starts and ends, Acta TechnicaNapocensis, Series: Applied Mathemathics and Mechanics, Nr. 50, Vol. I, 2007, p.33-38, ISSN 1221-5872.
55. ANTAL, T .A., Using Oracle JDeveloper 10g to build a Miscrosoft Access databaseJava interface, Acta Technica Napocensis, Series: Applied Mathemathics andMechanics, Nr. 50, Vol. VII, 2007, p.33-38, ISSN 1221-5872.
200856. ANTAL Tibor Sándor, ANTAL Béla, Egy módszer a profileltolás tényezők
meghatározására a csavarkerékpárok esetében / A method for choosing the specificaddendum modification at helical spur gears / O metodă pentru determinareadeplasărilor specifice de profil în cazul angrenajelor elicoidale, / 16th InternationalConference in Mechanical Engineering / A XVI-a Conferinta Internationala deInginerie Mecanica, XVI OGÉT 2008, Braşov, publicat în revista Műszaki Szemle,p.32-37, 1-4 mai, 2008, ISSN 1454-0746.
57. ANTAL, T .A., ANTAL, A., The study of the specific sliding at helical gears fordifferent axle angles with matlab, Acta Technica Napocensis, Series: AppliedMathemathics and Mechanics, Nr. 51, Vol. II, 2008, p.51-56, ISSN 1221-5872.
58. ANTAL, T .A., ANTAL, A., An object oriented model for the study of thespecificaddendum modifications based on the sliding and relative velocitiesequalization at helical gears, Acta Technica Napocensis, Series: Applied Mathemathicsand Mechanics, Nr. 51, Vol. II, 2008, p.45-50, ISSN 1221-5872.
200959. Tiberiu Alexandru Antal, Adalbert Antal, Mariana Arghir, Determination of the
http://www3.interscience.wiley.com/journal/91016652/issueyear?year=2008.60. T. A. Antal, A NEW ALGORITHM FOR HELICAL GEAR DESIGN WITH
ADDENDUM MODIFICATION, SCIENTIFIC JOURNAL "MECHANIKA", Nr. 3(77),2009, Kaunas University of Technology, Vilnius Gediminas Technical University, andthe Lithuanian Academy of Sciences, p.53-57, ISSN 1392 - 1207.http://zurnalas.mechanika.ktu.lt/?action=journal&nr_id=15. -ISI
61. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Geometrical dimensions of helical gearswith equalized relative velocities at the beginning and the ending of the meshing,Computational Kinematics, Andres Kecskemethy, Andres Muller Editors, Springer-Verlag, 2009, p. 385-392, Springer-Verlag, ISBN 978-3-642-01946-3, Duisburg,Germany, DOI: 10.1007/978-3-642-01947-0,http://www.springer.com/engineering/book/978-3-642-01946-3. -ISI Pro
62. ANTAL Tiberiu Alexandru, ANTAL Adalbert, A method for the determination of thegeometrical dimension of the helical gears with increased lifetime, Published in:Digital Ecosystems and Technologies, 2009. DEST '09. 3rd IEEE InternationalConference on Digital Ecosystems and Technologies, Publication Date: 1-3 June 2009,On page(s): 530-533, Location: Istanbul, Turkey,ISBN: 978-1-4244-2345-3, DigitalObject Identifier: 10.1109/DEST.2009.5276781,Current Version Published: 2009-10-02.-IEEE+ISI Pro
63. ANTAL Tiberiu Alexandru, Eficiency of crossed helical gears with equalized slindingcoefficients, Annals of DAAAM for 2009 & Proceedings of 20th DAAAM InternationalSymposium, Volume 20, No. 1, ISSN 1726-9679, ISBN 978-3-901509-70-4, Editor B.Katalinic, Published by DAAAM International, Vienna, Austria, EU, 2009, p. 1017-1018. -ISI Pro
64. ANTAL, T .A., GUI's in JDeveloper, Acta Technica Napocensis, Series: AppliedMathemathics and Mechanics, Nr. 52, Vol. IV, 2009, p.27-32, ISSN 1221-5872. - B+
65. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Helical Gear Dimensions in the Case ofthe Minimal Equalized Specific Sliding, The 10th, IFToMM International Symposiumon Science of Mechanisms and Machines, SYROM’09, October 12 - 15, 2009, Braşov,Romania. (in Editura Springer-Verlag GmbH, Editor: Visa Ion, ISBN978-90-481-3521-9). -ISI Pro
201066. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Worm gears with optimized main
geometrical parameters and their efficiency, Journal MECHANIKA, Issue: 1, Pages:62-65, Published: 2010, Publisher: KAUNAS UNIV TECHNOL, LAISVES AL 55,KAUNAS, 44309, LITHUANIA, IDS Number: 572OJ, ISSN: 1392-1207, 2009 ImpactFactor 0.780. -ISI
67. ANTAL Tiberiu Alexandru, ANTAL Adalbert, The use of genetic algorithms for thedesign of mechatronic transmissions with improved operating conditions, 3rdInternational Conference on Human System Interaction May, University of IT andManagement in Rzeszow, Poland, 13-15, 2010. IEEE + ISI Pro.
68. ANTAL Tiberiu Alexandru, ANTAL Adalbert, A design method of crossed axes helicalgears with increase uptime and efficiency, In: New Trends in Mechanism Science,Analysis and Design, Series: Mechanisms and Machine Science, Vol. 5, D. Pisla el al.(Eds.) Springer Science+Business Media B.V. 2010, p. 641-648
69. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Cylindrical worm gears with improvedmain parameters, In: New Trends in Mechanism Science, Analysis and Design, Series:Mechanisms and Machine Science, Vol. 5, D. Pisla el al. (Eds.) SpringerScience+Business Media B.V. 2010, p. 625-632.
70. ANTAL Tiberiu Alexandru, ANTAL Adalbert, Determination of the geometricaldimensions of the helical gears with addendum modifications based on the specificsliding equalization model, In: Advanced Techniques in Computing Sciences andSoftware Engineering, Khaled Elleithy Editors, Springer Netherlands, 2010, 85-90,DOI: 10.1007/978-90-481-3660-5_15 (http://dx.doi.org/10.1007/978-90-481-3660-5_15). -ISI Pro
71. ANTAL, T .A., Programming AutoCAD using JAWIN from Java in JDeveloper, ActaTechnica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 53, Vol. III,2010, p.481-486, ISSN 1221-5872. - B+
201172. ANTAL, T .A., A new algorithm for cylindrical worm gears dimensioning based on the
hydrodynamic lubrication conditions between the teeth flanks, MECHANIKA, Issue: 4,Pages: 400-403, Published: 2011, Publisher: KAUNAS UNIV TECHNOL, LAISVES AL55, KAUNAS, 44309, LITHUANIA, IDS Number: 572OJ, ISSN: 1392-1207. 2010Impact Factor 1.144 - ISI
201273. ANTAL, T .A., Some aspects of graphical process simulation in Visual Basic, Acta
Technica Napocensis, Series: Applied Mathemathics and Mechanics, Nr. 55, Vol. I,2012, p.51-56, ISSN 1221-5872. / B+.
74. Carmen Anca Huniadi, TIBERIU ALEXANDRU ANTAL, Florin Stamatian, Theeffects of Ulipristal on surgically induced endometriosis in a rat model, Gineco.ro 28(2/2012). B+
201375. Carmen Anca Huniadi, Ovidiu L. POP, TIBERIU ALEXANDRU ANTAL, Florin
Stamatian, The effects of Ulipristal on Bax/Bcl-2, Cytochrome C, Ki-67 andCyclooxygenase-2 expression in a rat model with surgically induced endometriosis,European Journal of Obstetrics & Gynecology and Reproductive Biology, 2013, PII:
76. ANTAL, T .A., A design method of the cylindrical worm gears, Acta TechnicaNapocensis, Series: Applied Mathemathics and Mechanics, Nr. 56, Vol. II, 2013,p.299-302, ISSN 1221-5872. - BDI.
201477. ANTAL, T.A., Addendum modification of cylindrical spur gears with equalizaed powers
lost by friction between the teeth flanks at the points where the meshing stars andends, ACTA TECHNICA NAPOCENSIS, ACTA TECHNICA NAPOCENSIS, Series:Applied Mathematics, Mechanics, and Engineering, Vol. 57, Issue III, September 2014,pp.329-334, ISSN 1221-5872. – BDI(http://www.atna-mam.utcluj.ro/index.php/Acta/article/view/387/376).
78. ANTAL, T.A., The power lost by friction, between the teeth flanks, for cylindrical spurgears, at the points where the meshing stars and ends, acta technica napocensis,ACTA TECHNICA NAPOCENSIS, Series: Applied Mathematics, Mechanics, andEngineering, Vol. 57, Issue I, September 2014, pp.7-10, ISSN 1221-5872. – BDI(http://www.atna-mam.utcluj.ro/index.php/Acta/article/view/171/167).
201579. ANTAL, T.A., Programming Canvas x pro 16 using scripting technologies, acta
201680. ANTAL Tiberiu Alexandru, Addendum modification of spur gears with equalized
efficiency at the points where the meshing stars and ends, MECHANIKA, Issue: 6 ,Pages: 480-485, DOI: 10.5755/j01.mech.21.6.12480, 2015/Published in 2016, 2014Impact Factor: 0.292 - ISI.
IV. Cursuri postuniversitare
1. În perioada 2000-2001 am conceput si am predat cursul Crearea si exploatarea bazelorde date relationale, la Alba-Iulia si Cluj-Napoca, în cadrul Scolii Academice de StudiiPostuniversitare Informatica Aplicata si Programare din cadrul Departamentuluipentru Educatie Continua si Învatamânt la Distanta (D.E.C.I.D.) al UTC-N.
2. Începând din anul 2002 am conceput si predat, în cadrul Cursului Postuniversitar deSpecializare în Informatica Tehnica materiile, cursurile: Calcul tabelar, creareabazelor de date relationale (Access si, la cerere, Excel ); Programare în limbajul VisualBasic for Applications (VBA); Exploatarea bazelor de date relaţionale (Microsoft Access97, 2000 si 2002).
V. Doctorat
Teza de doctorat este întitulata: "Sisteme de integrare a unor baze de date neomogenepentru sinteza mecanismelor", conducator Prof. dr. doc. şt. ing. SZEKELY Emeric,titul de doctor obtinut la data de 10 iulie 1998 la UNIVERSITATEA TEHNICĂ din CLUJ -NAPOCA în specializarea mecanisme.
