1

Curriculum vitae Europass

Informaţii personale

Nume / Prenume Popa, Dragos-Laurentiu

Adresă(e) 17, str. M-sal. Alex. Averescu, Bl. F5, sc.1, ap.17, Craiova, România

Telefon(oane) +4035409710 Mobil:+40752073731

Fax(uri)

E-mail(uri) popa_dragos@hotmail.com, popadragoslaurentiu@yahoo.com, popadragoslaurentiu@gmail.com

Naţionalitate(-tăţi) română

Data naşterii 03 februarie 1965

Sex masculin

Domeniul ocupaţional Învăţământ superior

Experienţa profesională

Perioada 2009-prezent

Funcţia sau postul ocupat Conferenţiar universitar

Activităţi şi responsabilităţi principale Disciplinele: “Grafica asistata de calculator”, “Programarea calculatoarelor si limbaje de programare”, “Desen tehnic”, “Geometrie descriptiva”, “Infografica”

Numele şi adresa angajatorului Facultatea de Mecanica, Universitatea din Craiova, Calea Bucuresti 107, Craiova, Romania

Tipul activităţii sau sectorul de activitate

Didactică; cercetare

Perioada 1999-2009

Funcţia sau postul ocupat Lector universitar

Activităţi şi responsabilităţi principale Disciplinele: “Grafica asistata de calculator”, “Programarea calculatoarelor si limbaje de programare”, “Desen tehnic”, “Geometrie descriptiva”, “Infografica”

Numele şi adresa angajatorului Facultatea de Mecanica, Universitatea din Craiova, Calea Bucuresti 107, Craiova, Romania

Tipul activităţii sau sectorul de activitate

Didactică; cercetare

Perioada 1993-1999

Funcţia sau postul ocupat Asistent universitar

Activităţi şi responsabilităţi principale Disciplinele: “Grafica asistata de calculator”, “Desen tehnic”, “Geometrie descriptiva”

Numele şi adresa angajatorului Facultatea de Mecanica, Universitatea din Craiova, Calea Bucuresti 107, Craiova, Romania

Tipul activităţii sau sectorul de activitate

Didactică; cercetare

2

Perioada 1991-1993

Funcţia sau postul ocupat Preparator universitar

Activităţi şi responsabilităţi principale Disciplinele: “Desen tehnic”, “Geometrie descriptiva”

Numele şi adresa angajatorului Facultatea de Mecanica, Universitatea din Craiova, Calea Bucuresti 107, Craiova, Romania

Tipul activităţii sau sectorul de activitate

Didactică, cercetare

Educaţie şi formare

Perioada 1997 – 2003

Calificarea / diploma obţinută Titlul de doctor în “Ştiinţe inginereşti”

Disciplinele principale studiate / competenţe profesionale dobândite

Mecanisme, biomecanisme, proiectare asistata de calculator

Numele şi tipul instituţiei de învăţământ / furnizorului de formare

Universitatea din Craiova, Facultatea de Mecanică, domeniul Inginerie Mecanică

Nivelul în clasificarea naţională sau internaţională

Perioada 1984-1989

Calificarea / diploma obţinută Inginer mecanic; Media examen de diplomă: 10.00.

Disciplinele principale studiate / competenţe profesionale dobândite

specializarea Masini Unelte

Numele şi tipul instituţiei de învăţământ / furnizorului de formare

Universitatea din Craiova, Facultatea de Mecanică, domeniul Inginerie Mecanică

Nivelul în clasificarea naţională sau internaţională

Aptitudini şi competenţe personale

Limba(i) maternă(e) Română

Limba(i) străină(e) cunoscută(e)

Autoevaluare Înţelegere Vorbire Scriere

Nivel european (*) Ascultare Citire Participare la conversaţie

Discurs oral Exprimare scrisă

Limba engleză B2 Utilizator independent B1 Utilizator

independent A1 Utilizator elementar A1 Utilizator

elementar A1 Utilizator elementar

Limba rusă. A1 Utilizator elementar A1 Utilizator

elementar A1 Utilizator elementar A1 Utilizator

elementar A1 Utilizator elementar

(*) Nivelul Cadrului European Comun de Referinţă Pentru Limbi Străine

Competenţe şi abilităţi sociale 2012-2016 membru in Consiliul Calitatii al Universitatii din Craiova

3

Competenţe şi aptitudini organizatorice

- (chairman) presedinte al sectiunii nr.9, Advanced Robotics and Simulation, RAAD’04, Brno, 2-5 iunie, 2004, Republica Ceha; - organizator 1st Workshop in Romania, Biodent project, 2-3 July 2013 - membru in comitetul stiintific al The National Biomechanics Congress, internationally participated, held at Suleyman Demirel University on October 16 -18, 2014 under the leadership of the Biomechanics Research Group, Isparta, Turkey. - in anul 2000 am facut parte din comitetul de organizare a celei de-a VII-a editii a Conferintei Nationale Grafica-2000 care a avut loc la Craiova cand au fost puse bazele infiintarii Societatii Inginerilor de Grafica Tehnica din Romania (Sorging); - organizator al Seminarului BIOMECANICA IMPLANTURILOR DENTARE in cadrul proiectului Leonardo, New Applications and Course Materials for Prosthetic Dentistry, Implant Dentistry and BiomedicalEngineers,2012-1-TR1-LEO05-35166 - BIO-DENT, parteneri interni: Universitatea din Craiova, Universitatea de Medicina si Farmacie din Craiova, 2012-2014, Vineri, 11.07.2014, ora 10.00, Facultatea de Mecanică, Str. Calea București, Nr.107,Sala BA 201, Lectori: Conf.dr.ing.Dragoș POPA, Conf.dr.ingAlina DUȚĂ, Șef lucrări dr. Allma PITRU; - organizator al Seminarului BIOCOMPATIBILITATEA IMPLANTURILOR DENTARE in cadrul proiectuluiLeonardo, New Applications and Course Materials for Prosthetic Dentistry, Implant Dentistry andBiomedical Engineers,2012-1-TR1-LEO05-35166 - BIO-DENT, parteneri interni: Universitatea din Craiova, Universitatea de Medicina si Farmacie din Craiova, 2012-2014, Vineri, 18.07.2014, ora 10.00, Facultatea de Medicină Dentară, Str. Petru Rareș, Nr.5, Sala 311, Lectori: Șef lucrări dr. Allma PITRU, Conf.dr.ing.Dragoș POPA, Conf.dr.ing Alina DUȚĂ.

Competenţe şi aptitudini tehnice capacitatea de a utiliza imprimante 3D

Competenţe şi aptitudini de utilizare a calculatorului

Utilizarea pachetului Microsoft Office Utilizarea programului CorelDraw Perfecţionări în domeniul: CAD-CAM-CAE / privind Simularea şi modelarea sistemelor mecanice – analize statice şi dinamice, cu ajutorul metodei Elementelor Finite (FEM) Activităţi didactice privind consultaţii de specialitate acordate studenţilor pentru perfecţionarea în studiul cu FEM în modelarea spaţială a sistemelor mecanice, cu programele: SolidWorks, AutoCAD sau ProEngineer, în cadrul laboratoarelor de proiectare asistată din facultate.

Competenţe şi aptitudini artistice

Alte competenţe şi aptitudini Diplome:

- diploma de merit, pentru intreaga activitate didactica si stiintifica, Universitatea din Craiova, Facultatea de Mecanica, 9 noiembrie 2007 ;

- diploma « Cel mai apreciat profesor de laborator », cu ocazia proiectului « 10 pentru Mecanica », Organizatia Studentilor din Facultatea de Mecanica, 18 martie 2009.

Permis(e) de conducere Categoria B; 1991-prezent

Informaţii suplimentare Afilieri la organizaţii profesionale naţionale recunoscute: - membru al Societatii stiintifice "Gogu Constantinescu", Craiova. - membru AGIR; - membru al Fundatiei "Profesorii fara frontiere"; - membru SIAR ; - membru al Societatii Romane de Robotica ; - membru SORGING. Afilieri la organizaţii profesionale internaţionale recunoscute: - membru al Society of Automotive Engineers (SAE International) - membru al Daaam International Vienna

Anexe Lista cu cele mai relevante contribuţii ştiinţifice şi de cercetare, (ultimii 5 ani)

Data completării Semnătură 04.10.2018

1

UNIVERSITATEA DIN CRAIOVA FACULTATEA DE MECANICĂ CATEDRA DE AUTOVEHICULE, TRANSPORTURI SI INGINERIE INDUSTRIALA conf. dr. ing. POPA Dragos-Laurentiu

LISTA DE LUCRĂRI

a) Teza de doctorat

Popa Dragos-Laurentiu, CONTRIBUTII LA STUDIUL MECANISMELOR DE DEPLASARE PRIN SALT, PRIN ANALOGIE CU LUMEA VIE, Universitatea din Craiova, pp.429, 1997-2003. Teza de doctorat a fost sustinuta in departamentul de Mecanica Aplicata la data de 31 martie

2003 si in sedinta publica la data de 10 iunie 2003. Pe baza avizarii de catre Consiliul National de Atestare a Titlurilor, Diplomelor si Certificatelor

Universitare, aprobata prin ordinul Ministrului Educatiei Nationale Nr. 4741 din 25 august 2003 s-a conferit titlul de doctor, diploma seria C nr. 0009987. b) Cărţi şi capitole din cărţi publicate b1) Capitole in carti ISI recunoscute international

1. Tarnita D., Popa D., Dumitru N., Tarnita D.N., Marcusanu V., Berceanu C., Numerical simulation of the virtual human knee joint, in New Trends in Mechanism Science: Analysis and Design. Mechanisms and Machine Science 5, DOI 10, 1007/978-90-481-9689-0_36, Springer Science + Business Media B.V. 2010, pp. 309-317; [ISI]

2. D. Tarnita, D. Popa, C. Boborelu, N. Dumitru, D. Calafeteanu, D. N. Tarnita, Experimental Bench Used to Test Human Elbow Endoprosthesis, New Trends in Mechanism and Machine Science Mechanisms and Machine Science, From Fundamentals to Industrial Applications, Volume 24, Springer, Series editor, Marco Ceccarelli, Cassino, Italy, ISSN 2211-0984 ISSN 2211-0992 (electronic), ISBN 978-3-319-09410-6, ISBN 978-3-319-09411-3 (eBook), DOI 10.1007/978-3-319-09411-3, 2014, pp 669-677, 2015 [ISI];

b2) Monografii în edituri recunoscute CNCSIS

1. G. Gherghina, D. Popa, M. Tudor, Notiuni generale de desen tehnic industrial, Ed. Universitaria Craiova, pp. 164, ISBN 973-8043-177-7, 2002 ; 2. D. Popa, Grafica asistata de calculator, Ed. Sitech, Craiova, pp.154, ISBN 973-657-444-X, 2003; 3. D. Popa, Deplasarea prin salt, de la lumea vie la robotii mobili, pp. 346, ed. Universitaria, Craiova, ISBN 973-742-201-5, 007.57, 2005 ; 4. D. Popa, G. Gherghina, Infografica, Ed. Sitech, ISBN 978-606-530-028-6, pp. 308, Craiova 2008. b3) Manuale universitare în edituri recunoscute CNCSIS

1. D. Popa, L. Sass, G. Gherghina, A. Duta, G. Stanescu, Grafica asistata de calculator. De la 2D la 3D, ed. Sitech, pp. 235, ISBN 978-973-746-505-4, Craiova, 2007; 2. D. Popa, G. Gherghina, M. Calbureanu, Grafica asistata de calculator pentru constructii. De la 2D la 3D, pp. 280, ed. Sitech, ISBN 978-973-746-801-7, Craiova 2008; 3. D. Popa, L. Sass, Grafica asistata de calculator, Ed. Sitech, pp. 269, ISBN 978-973-746-800-0, Craiova 2008. 4. D. Popa, L. Sass, G. Gherghina, Grafica asistata de calculator, 250 pg., Ed. Sitech, Craiova, ISBN 978-606-11-0153-5, 2010; 5. Sass L., Duta A., Popa D.L., Grafica asistata de calculator, 295 pg., Ed. Sitech, Craiova, ISBN 978-606-11-3395-6, 2013;

2

6. Sass Ludmila, Duta Alina, Popa Dragos, Grafica asistata de calculator, Ed. Sitech, ISBN 978-606-11-3940-8, pp. 304, Craiova 2014; 7. Sass Ludmila, Popa Dragos, Duta Alina, Aplicatii grafice in AutoCAD, pp.212, Ed. Sitech, ISBN 978-606-11-4498-3, 2015. 8. Dragoș Popa, Duță Alina, Sass Ludmila, George Gherghină, Tutunea Dragoș, Stănescu Gelica, Grafica asistată de calculator pentru construcții. Modelare și programare, pp. 364, Ed. Sitech, ISBN 978-606-11-5036-6, 2015. 9. Gherghina G., Popa D., Tutunea D., Desen tehnic- teorie si aplicatii, pp. 236, Ed. Sitech, ISBN 978-606-11-4981-0, 2015. 10. Tutunea D., Gherghina G., Popa D.L., Dima A., Desen tehnic si Infografica, Note de curs si aplicatii de laborator, pp. 323, Ed. Universitaria, ISBN 978-606-14-1109-2, 2017. 11. Popa D.L., Sass L., Barbu A., Proiectare asistata de calculator pentru constructii. Desenare, Modelare si Programare, pp. 349, Ed. Sitech, ISBN 978-606-11-6273-4, Craiova, 2018; 12. Sass L., Popa D., Duta A., Marinescu G., Grafica asistata de calculator. Aplicatii., Colectia Inginerie Mecanica nr. 92, pp. 204, Ed. Sitech, ISBN 978-606-11-6354-0, Craiova, 2018; b4) Contribuţii la alte cărţi în edituri recunoscute CNCSIS

b5) Monografii în alte edituri

1. I.A.Ene, Alina Butu, Dragos Popa, Reprezentarea organelor de masini pentru transmiterea unei miscari de rotatie, Facultatea de Mecanica, Craiova, 1992 (tiraj restrans); 2. G. Gherghina, D. Neagoe, G. Stanescu, A. Dinca, D. Popa, Grafica tehnica. Partea a doua - Desen tehnic, Craiova, Ed. Egnatia, 1996 ; 3. A. Dinca, D. Popa, G. Stanescu, D. Neagoe, G. Gherghina, Geometrie descriptiva - indrumar de laborator, Craiova, Ed. Egnatia, 1996; 4. D. Popa, G. Gherghina, A. Dinca, G. Stanescu, D. Neagoe, Grafica asistata de calculator - indrumar de laborator, Craiova, Ed. Egnatia, 1996 ; 5.Dragos Popa, George Gherghina, Marin Tudor, Elemente de infografica tehnica. Teorie si aplicatii, Craiova, Ed. Radical, 1998.

b6) Manuale universitare în Reprografia Universităţii

1. George Gherghina, Dragos Popa, Marin Tudor, Notiuni de grafica tehnica. Teorie si aplicatii. Desen tehnic", Reprografia Universitatii din Craiova, 1998; 2. George Gherghina, Dragos Popa, Madalina Calbureanu, Marin Tudor, Grafica asistata de calculator", Reprografia Universitatii din Craiova, 1999 ; 3. G. Gherghina, D. Popa, M. Calbureanu, M. Tudor, Grafica asistata de calculator. Doua modalitati de abordare, Reprografia Universitatii din Craiova, pp. 218, 2000. 4. G. Gherghina, D. Popa, M. Tudor, Notiuni de grafica tehnica, Teorie si aplicatii, Desen tehnic, pp. 139, Reprografia Universitatii din Craiova, 2000. c) Articole/studii publicate în reviste de specialitate

c1) Articole în reviste cotate ISI cu factor de impact 1. Tarnita Daniela, D N Tarnita, D Grecu, D Popa, F I Rusu, Stresses and displacements for normal human knee menisci and for sectioned menisci using finite element method, British Journal of Sports Medicine, 2011; 45: e1 DOI: 10.1136/bjsm.2010.081554.43, vol45, issue 2, [indexata Medicus (Medline), ISI Current Contents (Web of Science), Excerpta Medica (Embase)] scor relativ de influenta 1,82; Fi 3,5 [ISI]; 2. Tarnita, D., Tarnita, D. N., Bizdoaca, N., Popa D., Considerations on the dynamic simulation of the virtual model of the human knee joint, Materialwissenschaft und Werkstofftechnik, Materials Science and Engineering Technology, Special Edition Biomaterials, Willey-Vch., Matwer 40 (1-2) 1-120 (2009) ISSN 0933-5137, Vol.40, No.1-2-January 2009, pp73-81, Fi 0.491

3

3. Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522, [indexată Medline, PUBMED]. Fi 0,381 [ISI]; 4. Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150, Fi 0,381 [ISI]. c2) Articole în Reviste sau Proceeding cotate ISI 1. Popa D., Gherghina G. and Tudor M., Jumping movement simulation for an experimental model, Proceedings for 2nd DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC03 - 14 th International DAAAM Symposium, ISBN 978-3-901509-34-6, Editors: Katalinic B.[ranko] & Tufekcic, Dz.[emo], Published by: Faculty of Mechanical Engineering, University of Tuzla and DAAAM International Vienna, Tuzla, Bosnia and Herzegovina, June 25-28, 2003 (ISI); 2. Bogdan C., Bogdan M.L., Popa D. & Gherghina G., Aspects Concerning Virtual Prototyping of Landing Gear Mechanisms, (2007), 097-098, Annals of DAAAM for 2007, ISBN 3-901509-58-5, ISSN 1726-9679, pp 50, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2007 (ISI) 3. Nicu George Bîzdoaca, Dan Tarnita, Daniela Tarnita, D. Popa, Elvira Bîzdoaca, Shape memory alloy based Modular Adaptive Ortophedic Implants, Proceedings of the WSEAS International Conference on BIOMEDICAL ELECTRONICS and BIOMEDICAL INFORMATICS (BEBI'08), ISSN 1790-5125, ISBN 978-960-6766-93-0, pp.188-195, Rhodes (Rodos) Island, Greece,, August 20-22, 2008 (ISI) (ISINET); 4. BOGDAN, Constantin; BOGDAN, Mihaela-Liana; POPA, Dragoş; GHERGHINA, George, Aspects Concerning Virtual Prototyping of Landing Gear Mechanisms, Annals for DAAAM for 2008, The 19th DAAAM International Symposium "Intelligent Manufacturing & Automation", Slovak University of Technology Faculty of Materials Science and Technology in Trnava, Slovakia, 22-25th October 2008 (ISI). 5. Tarnita D., Tarnita D.N., Bizdoaca N., Popa D., Tarnita C.E., Cismaru F., Modular Orthopedic Devices Based on Shape Memory Alloys, SYROM 2009: Proceedings of the 10th IFToMM International Symposium on Science of Mechanisms and Machines, held in Brasov, Romania, october 12-15, Springer 2009, (ISI) 6. R. Lungu, E. Borgazi, M. Lungu, D. Popa, D. Tutunea, M. X. Calbureanu, New methods for the simulation with finite element of the human elbow, Proceedings of the International Conference on Circuits, Systems, Signals, 2010 [ISI]; 7. Tarnita, D. Popa, D. N. Tarnita, Dr. Adam, Fl. Cismaru, Contributions on the dynamic simulation of the virtual model of the human knee joint, 10th International Symposium Biomaterials NRW 2008, Fundamentals and Clinical Applications, P04-056, pp.115-117, Essen, Germany, March 12 -14, 2008 (ISI); 18. Daniela Tarnita, C Boborelu, D Popa, D-N Tarnita, Design and Finite Element Analysis of a New Spherical Prosthesis-Elbow Joint Assembly, New Advances in Mechanism and Machine Science, pp. 127-135, 2018; c3) Articole în BDI 1. Tarnita, D.N., Tarnita, D., Popa, D., Tarnita, R., Analysis of stress and displacements of phalanx bone with the finite element method, Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, vol. 46 no. 4, 2005, ISSN 1220-0522, [indexată Medline, PUBMED]; 2. Popa, D., Tarnita, D.N., Tarnita, D., The generation of the three-dimensional model of the human knee joint, Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, vol. 46 no. 4, 2005, ISSN 1220-0522, [indexată Medline, PUBMED];

4

3. Tarnita, D., Popa, D., Tarnita, D. N., Grecu, D., CAD Method for 3D Model of the Tibia Bone and Study of Torsion and Compression Stress Using the Finite Element Method, Romanian Journal of Morphology and Embriology, Ed. Academiei Romane. ISSN 1220-0522, 2006 [indexată Medline, PUBMED]; 4. Tarniţă, D., Popa D., Tarniţă, D. N., Grecu, D., The virtual model of the human knee prosthetic components, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, aprilie 2007, ISSN 1220-0522, 2006 Vol 47. No.4, pp 339-344, [indexată Medline, PUBMED]. 5. BOGDAN, Constantin; BOGDAN, Mihaela-Liana; POPA, Dragoş; GHERGHINA, George, Experimental Research About Dynamics Behaviour of Landing Gear, (2008), Annals for DAAAM for 2008, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria (ISI); 6. Stefanita CIUNEL, Dragos POPA, The comparative analysis of the two types of frame for the dummy neck testing system, Journal of Industrial Design and Engineering Graphics, ISSN 1843-3766, indexata Copernicus, 2011 [BDI]; 9. CIUNEL Stefanita, POPA Dragos-Laurentiu and DUMITRU Nicolae, Studies about Movement Biofidelity of a Dummy Neck Used in an Impact Testing Device, Applied Mechanics and Materials Vol. 371 (2013) pp 539-543,Online available since 2013/Aug/30 at www.scientific.net, Trans Tech Publications, Switzerland doi:10.4028/ www.scientific.net/AMM.371.539 [BDI]; 10. St. Ciunel, D. L. Popa, N. Dumitru, M. Clinciu, The Virtual Morphology and the Main Movements of the Human Neck Simulations Used for Car Crash Studies, 70114-109, Advances in Biomedicine and Health Science, Recent Advances in Biology and Biomedicine Series | 2, pg.88- 93, also in Proceedings of the 2nd International Conference on Biomedicine and Health Engineering (BIHE '13), also in Proceedings of the 2nd International Conference on Health Science and Biomedical Systems (HSBS '13), Brasov, Romania, June 1-3, 2013, Published by WSEAS Press, ISSN: 1790-5125, ISBN: 978-1-61804-190-6 [BDI]; 11. Alexandru Dima, Dragos Tutunea, George Gherghina, Dragos Popa, COMPUTATIONAL STUDY OF FLOW AROUND THE FRONT WING OF A RACE CAR, 4th International Scientific Conference on Geometry and Graphics moNGeometrija 2014, ISBN 978-86-88601-13-9, vol.1, pp. 182-188[BDI]; 12. Popa Dragos-Laurentiu, Gherghina George, Duta Alina, Tutunea Dragos, Ciunel Stefanita, THE METHODS AND TECHNIQUES USED FOR THE HUMAN BONES VIRTUAL RE-CONSTRUCTION, 4th International Scientific Conference on Geometry and Graphics moNGeometrija 2014, ISBN 978-86-88601-13-9, vol.1, pp.189-198 [BDI]; 13.George Gherghina, Dragos Tutunea, Dragos Popa, ABOUT DESIGNING THE GEOMETRICAL SHAPES OF MULTI BODIES SOLIDS, 4th International Scientific Conference on Geometry and Graphics moNGeometrija 2014, ISBN 978-86-88601-13-9, vol.1, pp. 307-314 [BDI]; 14. Ludmila SASS, Dragos-Laurentiu POPA, Gelica STANESCU, ABOUT DRAWING IMAGES IN SPHERICAL MIRRORS, 4th International Scientific Conference on Geometry and Graphics moNGeometrija 2014, ISBN 978-86-88601-13-9, vol.2, pp.42-52 [BDI]; 15. Dragos Laurentiu POPA, Gabriel BUCIU , Dragos NICULESCU, Luminita CHIUTU, NEW ENGINEERING CONCEPTS, METHODS AND TECHNIQUES USED IN ORTHOPEDICS, SEPTEMBER 2014 - VOLUME 9 SPECIAL ISSUE of JIDEG: International Conference ISTM 2014 papers, pp.103-108 [BDI]; 16. BUCIU Gabriel, NEMES Raducu, GRECU Dan, NICULESCU Dragos, POPA Dragos-Laurentiu and CHIUTU Luminita, Contributions to the complete virtual human tibia morphology for orthopedics surgery simulation and finite element analysis, Current Health Sciences Journal,vol.39, ISSN 2069-4032 (online edition), ISSN 2067-0656 (printed edition), Supplement 3, 2013, pg.26-31 [BDI]. 17. BUCIU Gabriel, GRECU Dan, NICULESCU Dragos, CHIUTU Luminita, STOICA Maria, POPA Dragos-Laurentiu and NEMES Raducu, Two New Designs of Tibia Nails Which Eliminate Interlocking Screws and Finite Element Analysis, Current Health Sciences Journal, vol.39, ISSN

5

2069-4032 (online edition), ISSN 2067-0656 (printed edition), Supplement 4, 2013, pg.39-41 [BDI]. 18. Stefanita Ciunel, Dragos Popa, THE VIRTUAL BEHAVIOR OF THE DUMMY NECK DURING CRASH SIMULATIONS, The 4 th International Conference on Engineering Graphics and Design, ICEGD-2011, Iasi 2-4 of June, publicata in Buletinul Institutului Politehnic din Iasi, Tomul LVII, Fasc.5, pg.221-228 ISSN 1011-2855 [BDI].; 19. Stefanita Ciunel, Dragos Popa, THE VIRTUAL DUMMY BEHAVIOR DURING CRASH SIMULATIONS, The 4 th International Conference on Engineering Graphics and Design, ICEGD-2011, Iasi 2-4 of June, publicata in Buletinul Institutului Politehnic din Iasi, Tomul LVII, Fasc.5, pg.255-260 ISSN 1011-2855 [BDI].; 20. Petre VASILUTA, Nicolae COFARU and Dragos POPA, Total solar radiation AUTOlisp program for landfill geomembranes folding evaluation, Conferinta internationala Computing and Solutions in Manufacturing Engineering 2012 - CoSME12, Brasov, 25-26 octombrie, ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, ISSN 1583-7904, VOL. 10, ISSUE 3/2012, pp.6-11 [BDI].; 21. Petre Vasiluta, Nicolae Cofaru and Dragos Popa, Ecological landfill folded geomembranes behavior during virtual experiments, Conferinta Internationala: Computing and Solutions in Manufacturing Engineering 2012 - CoSME12, Brasov, 25-26 octombrie, Academic Journal Of Manufacturing Engineering, ISSN 1583-7904, Vol. 10, Issue 3/2012, pp.12-18 [BDI].; 22. Popa Dragos-Laurentiu, Gherghina George, Tutunea Dragos, Bogdan Mihaela-Liana, The Kinematic, Dynamic and FEA Analysis of The Human Main Joints, 14th International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2010, ISSN 1840-4944, pp.573-576, Mediterranean Cruise, 11-18 September 2010 [BDI]; 23. Buciu, G., Grecu, D., Niculescu, D., Chiutu, L., Stoica, M. and Popa, D., Studies about Virtual Behavior of Tibia Fractures and Nails During the Fixation. Journal of Industrial Design and Engineering Graphics, vol.8, issue no.2, pp. 5-10, 2013. 24. Allma R. PITRU, Alina DUȚĂ, Dragoș Laurentiu POPA, STUDY OF BIOMECHANICAL PROPERTIES OF DIFFERENT TYPES OF DENTAL IMPLANTS, Journal of Engineering Sciences and Design 2(3),SI:BioMechanics2014, ISSN: 1308-6693, Suleyman Demirel University, pp. 283-285, 2014 25. Dragoș Laurentiu POPA, Alina DUȚĂ, Allma R. PITRU, THE MODELING OF SOME TYPES OF IMPLANTS AND PROSTHESES USED FOR OSTEOINTEGRATION, Journal of Engineering Sciences and Design 2(3),SI:BioMechanics 2014, ISSN: 1308-6693, Suleyman Demirel University, pp. 273-281, 2014 26. GHERGHINA George, TUTUNEA Dragos, POPA Dragos, BOGDAN Mihaela and LAMBRACHE Nicolas, The Method of Design and Manufacturing of the Gear Hobbing Cutter with Bulges, Applied Mechanics and Materials Vol. 657 (2014) pp 13-17, © (2014) Trans Tech Publications, Switzerland,doi:10.4028/www.scientific.net/AMM.657.13 [ISI]; 27. TATARU Ion, POPA Dragos-Laurentiu and ILINCIOIU Dan, High Speed Impact Virtual Studies Made on Projectiles Models for Designing Shields Based on Innovative Materials, Applied Mechanics and Materials Vol. 657 (2014) pp 654-658, (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.657.654 [ISI]; 28. BUCIU Gabriel, TARNITA Danuţ Nicolae, POPA Dragos-Laurenţiu, LUNGU Mihai Aureliu, MIRITOIU Cosmin and UNGUREANU Aurora, Virtual and Experimental Studies about Human Walking. Virtual Lower Leg Environment. Innovative Design of Tibia Nail, Applied Mechanics and Materials Vol. 657 (2014) pp 770-774, © (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.657.770 [ISI]; 29. CIUNEL Stefanita, DUTA Alina, POPA Dragos-Laurentiu, POPA-MITROI Gheorghe and DUMITRU Violeta Cristina, The Behavior of the Virtual Human Head-Neck System during the Main Movements, Applied Mechanics and Materials Vol. 657 (2014) pp 780-784, © (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.657.780 [ISI];

6

30. DUMITRU Violeta Cristina, POPA Dragos-Laurentiu, DUTA Alina and CIUNEL Stefanita, Techniques, Methods and Instruments for Human Bone Virtual Reconstruction. Main Human Movements Simulations, Applied Mechanics and Materials Vol. 658 (2014) pp 423-428 ,© (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.658.423 [ISI]; 31. CIUNEL Stefanita, POPA Dragos-Laurentiu, GHERGHINA George, BOGDAN Mihaela and TUTUNEA Dragos, Human Head-Neck System Behavior During Virtual Impact Automotive Simulations, Applied Mechanics and Materials Vol. 659 (2014) pp 177-182, © (2014) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMM.659.177 [ISI]; 32. CIUNEL Stefaniţă, POPA Dragoş-Laurenţiu, Analysis and Dynamic of Human Cranio-Cervical Complex Movements, Applied Mechanics and Materials, ISSN: 1662-7482, Vols. 809-810, pp 1187-1192, doi:10.4028/www.scientific.net/AMM.809-810.1187, 2015, Trans Tech Publications, Switzerland [ISI]; 33. George GHERGHINA, Dragos TUTUNEA, Dragos POPA, About digital mock-up for mechanical products, Journal of Industrial Design and Engineering Graphics, special issue, section 2, Applied Geometry and Graphics, pp.19-22, 2015 [BDI]; 34. Dragos Laurentiu POPA, Dragos TUTUNEA, George GHERGHINA, Stefanita CIUNEL, Methods used for the virtual human bones and joints re-construction. Normal and pathological human joints virtual simulations, Journal of Industrial Design and Engineering Graphics, special issue, section 2, Applied Geometry and Graphics, pp.49-54, 2015, [BDI]; 35. D. Calin, D. Tarnita, D. Popa, A. Rosca, D. Tarnita, "The 3D Virtual Model of a Classical Hip Joint Prosthesis", Applied Mechanics and Materials, Vol. 823, pp. 161-166, 2016. 36. BOGDAN Mihaela-Liana, GEONEA Ionut, SIMNICEANU Loreta, OTAT Victor, POPA Dragos-Laurentiu, The Modal Analysis for the Helicoidally Spring of the Macpherson Automotive Suspension, Applied Mechanics and Materials, ISSN: 1662-7482, vol. 822, pp 83-88, doi:10.028/www.scientific.net/A.822.83, 2016, Trans Tech Publications, Switzerland [ISI]; 37. POPA Dragos-Laurentiu, DUTA Alina, TUTUNEA Dragos, GHERGHINA George, BUCIU Gabriel and CALIN Daniel Cosmin, Virtual Methods Applied to Human Bones and Joints Re-Construction Used for Orthopedic Systems, Applied Mechanics and Materials, ISSN: 1662-7482, vol. 822, pp 160-165, doi: 10.4028/www.scientific.net/AMM.822.160, 2016, Trans Tech Publications, Switzerland [ISI]; 38. CIUNEL Stefanita, TICA Bebe, POPA Dragos-Laurentiu, Mathematical Model of a Dummy Cranio - Cervical Complex in Frontal Impact Testing Device, ISSN: 1662-7482, vol. 822, pp 472-479, doi: 10.4028/www.scientific.net/AMM.822.472, 2016, Trans Tech Publications, Switzerland [ISI]; 39. BOGDAN Mihaela-Liana, POPA Dragos Laurentiu, SIMNICEANU Loreta and CONSTANTINESCU Augustin, Modeling and simulation of the stand for testing of helicoidally springs from automotive’s suspension, ISSN: 1662-7482, vol. 823, pp 271-276, doi: 10.4028/www.scientific.net/AMM.823.271, 2016, Trans Tech Publications, Switzerland [ISI]; 40. GHERGHINA George, POPA Dragos Laurentiu and TUTUNEA Dragos, Simulation of A Mono Cylindrical Engine With LES Software, ISSN: 1662-7482, vol. 823, pp 347-352, doi: 10.4028/www.scientific.net/AMM.823.347, 2016, Trans Tech Publications, Switzerland [ISI]; 41. D. Calin, D. Tarnita, D. Popa, D. Calafeteanu, D. Tarnita, "Virtual Model and Simulation of the Normal and Affected Human Hip Joint", Applied Mechanics and Materials, Vol. 823, pp. 167-172, 2016. 42. Popa D.L., POENARU Florin, GHERGHINA George, TUTUNEA Dragos, POPKONSTANTINOVIC Branislav, New CAD Techniques Used for Virtual Bone Models Applied in Orthopedics, Journal of Industrial Design and Engineering Graphics, no. 12, pp.133-136, ISSN 2344-4681, 2017. 43. GHERGHINA George, TUTUNEA Dragos, POPA Dragos, Evolution in Technical Drawing for Mechanical Products, Journal of Industrial Design and Engineering Graphics, no. 12, pp. 105-110, ISSN 2344-4681, 2017.

7

44. Zorana J., Duta A., Popa D., A 3d Analysis of Geometrical Factors and Their Influence on Air Flow Around a Satellite Dish, FME Transactions, no.2, vol. 2, pp.263, ISSN 1451-2092, Serbia, 2017; 45. Popa A.D., Duta A., Popa D.L., Virtual and Rapid Prototyping Methods Applied in Civil Engineering. Snow, Wind and Earthquake Simulations on a Five Storey Building, FME Transactions, no.2, vol. 2, pp.277, ISSN 1451-2092, Serbia, 2017; 46. Petre Vasiluta, Ileana Ioana Cofaru, Nicolae Florin Cofaru, Dragos Laurentiu Popa, Studies of the Solar Radiations' Influence About Geomembranes Used in Ecological Landfill, ACTA Universitatis Cibiniensis, ISSN 1583-7149 Volumul 69, nr. 1, pp. 148-154, 2017; 47. Mihaela Vatu, Monica Mihaela Craitoiu, Daniela Vintila, Veronica Mercut, Sanda Mihaela Popescu, Monica Scrieciu, Dragoș Laurențiu Popa, DETERMINATION OF RESISTANCE FORCES FROM MANDIBULAR MOVEMENTS THROUGH DYNAMIC SIMULATION USING KINEMATIC ANALYSIS AND FINITE ELEMENTS METHOD, Romanian Journal of Oral Rehabilitation, no. 1, vol. 10, pp. 20-28, 2018. 48. M. Vatu,. VINTILA Daniela, POPA Dragos-Laurentiu, 3D Skull Virtual Model Based on CT or MRI Images Used for Dentistry Simulations, Applied Mechanics and Materials, Vol. 880, pp. 101-110, 2018; 49. George Gherghina, Dragos Tutunea, Alexandru Dima, Dragos Laurentiu Popa, 3D Model Based Process in Automotive Industry, Applied Mechanics and Materials, Vol. 880, pp. 151-156, 2018; 50. Duta A., Popa D., Dumitru V., Economics And Construction Legislation: Teaching Approaches And Methods Applied To Our University Students, Vol.18,Ecology, Economics, Education and Legislation, Issue:5.4, Education and Accreditation in Geosciences, pp.51-58, ISSN 1314-2704, ISBN 978-619-7408-49-2, Ed. STEF92 Technology Ltd, Sofia, Bulgaria, 2018;

c4) Articole în reviste recunoscute CNCSIS, tip B

1. Dragos POPA, George GHERGHINA, Marin TUDOR, Aspects About a CAD/CAE Method for Welding Assemblies, Ovidius University Annals of Mechanic Engineering, Volume 6, Tom I, ISSN 1223-72, pg. 335-340, 2004.

2. Dragos Popa, Alina Duta, Pitru Allma, Dragos Tutunea, George Gherghina, About the Simulation Environment for Dental Implant Studies, Scientific bulletin of the politehnica university of timisoara, romania, transactions on hydrotechnics / buletinul stiintific al universitatii politehnica din timisoara, romania,seria hidrotehnica, Tom 58(72), Fascicola suplimentara, 2013, ISSN 1224-6042, Ed. Politehnica, pg.137-141;

3. Dragos Tutunea, George Gherghina, Dragos Popa, Consideration about the Design of Automotive Mufflers, Buletinul Ştiinţific al Universităţii "POLITEHNICA" din Timişoara Seria HIDROTEHNICA, Tom 58(72), Fascicola suplimentara, 2013, ISSN 1224-6042, Ed. Politehnica, pg.129-132;

4. George Gherghina, Dragos Tutunea, Dragos Popa, About Element of Advanced Part Modelling, Buletinul Ştiinţific al Universităţii "POLITEHNICA" din Timişoara Seria HIDROTEHNICA, Tom 58(72), Fascicola suplimentara, 2013, ISSN 1224-6042, Ed. Politehnica, pg.133-136;

c5) Articole în reviste recunoscute CNCSIS, tip C

1. D. Adam, R. Melinte, D. Popa, Simularea „In Vitro” a Instabilitatilor Ligamentare ale Genunchiului Uman, Revista de Ortopedie si Traumatologie, vol.16, pp.101-105, ISSN 1220-6466.

c6) Articole în alte reviste naţionale

1. George Gherghina, Dragos Popa, Aprecieri privind influenta constructiei structurii portante asupra incertitudinii de masurare a MMC cu portal, Analele Universitatii "C. Brancusi" Tg. Jiu, seria A, nr.4/1997, Ed. AGER ,Tg.Jiu.

8

2. George Gherghina, Dragos Popa, Aspecte privind precizia si performantele masuratorilor cu masinile de masurat in coordonate, Analele Universitatii din Craiova - Seria Mecanica, Craiova, 1998. 3. Popa Dragos, Sass Ludmila, Utilizarea programelor grafice in studiul mecanismului de liniarizare al lui Evans, Analele Universitatii din Craiova - Seria Mecanica, Craiova, 1998. 4. Gherghina G., D. Popa, Methodologie pour la determination des pulsations propres de la structure portante d'une machine de mesurer en coordonnees, Acta Universitatis Cibiensis, vol XXXV, Seria Tehnica, B. Mecanica aplicata, pag. 333-336, UNIVERSITATEA Lucian Blaga din Sibiu, 2001. 5. Tudor Marin, Popa Dragos, George Gherghina, Consideratii privind studiul locomotiei prin pasire cu tarare folosind analiza imaginilor, The Romanian Review of Precision Mechanics, Optics & Mechatronics 2002, vol. 1-20a, pag.417-422; 6. Dragos Popa, George Gherghina, Marin Tudor, Consideratii privind studiul locomotiei prin salt folosind analiza imaginilor, The Romanian Review of Precision Mechanics, Optics & Mechatronics 2002, vol. 1-20a, pag.401-408; 7. Dragos Popa, George Gherghina , Marin Tudor, Aspecte privind obtinerea pe baza modelelor din lumea vie a schemelor cinematice echivalente pentru robotii care se deplaseaza prin salt, The Romanian Review of Precision Mechanics, Optics & Mechatronics 2002, vol. 1-20a, pag.409-416; 8. G. Gherghina, D. Popa, Erori de palpare la masurarea cu contact metalic, Analele Universitatii din Craiova, Facultatea de Mecanica, seria mecanica, nr.1/1999 ; 9. G. Gherghina, D. Popa, Sisteme de palpare utilizate la masurarea in coordonate, Analele Universitatii din Craiova, Facultatea de Mecanica, seria mecanica, nr.1/1999. 10. Popa Dragos, A recent history of the jumping robots - part 1, Analele Universitatii din Craiova - Seria Mecanica, Craiova, nr.1/2003, pag.147-154, ISSN 1223-5296; 11. Popa Dragos, Jumping Movement Simulation For An Experimental Model, Revista Mecanisme si Manipulatoare, Vol. 2, Nr. 1, 2003, pag. 57 – 62, ARoTMM – IFToMM; 12. Popa Dragos, A recent history of the jumping robots - part 2, Analele Universitatii din Craiova - Seria Mecanica, Craiova, nr.1/2002, pag.133-140 ISSN 1223-5296; 13. Dragos POPA, George GHERGHINA, Marin TUDOR, Aspects About a CAD/CAE Method for Welding Assemblies, Ovidius University Annals of Mechanic Engineering – Tehnonav 2004, Volume 6, Tom I, ISSN 1223-72, pg. 335-340, 2004; 14. Gherghina, G., Popa, D., Bogdan M., Modern measurement by coordinate measuring machines, Analele Universitatii din Craiova, seria Mecanica, Craiova, Nr.1/2004, pg.125-134, ISSN 1223-5296; 17. Bogdan M., Bogdan C., Popa D., THE MODELLING AND DYNAMIC SIMULATION OF THE LANDING GEAR ASSEMBLY, Analele Universitatii din Craiova, seria Mecanica, Craiova, Nr.1/2004, ISSN 1223-5296; 18. Tarnita D., Popa D. and Tarnita D. N., The Three-Dimensional Model of the Femural Prosthesis Component, The Annals of the University of Craiova, Mechanical Series, no.1/2005, Craiova.

c7) Articole în alte reviste internaţionale

d) Studii publicate în volumele unor manifestări ştiinţifice d1) Studii publicate în volume (cu ISBN) indexate în baze de date internaţionale

d2) Studii publicate în volumele (cu ISBN) unor conferinţe internaţionale desfăşurate în străinătate

1. Dragos POPA, Generarea elicoizilor strambi coaxiali cu ajutorul AUTOCAD R12, Conferinta internationala "Grafica inginereasca si metodica de predare", Chisinau 1995 ; 2. D. Neagoe, D. Popa, Generarea desfasuratelor corpurilor rotunde inclinate apeland subrutine care lucreaza sub Autocad, Conferinta internationala "Grafica inginereasca si metodica de predare", Chisinau 1995 ;

9

3. George Gherghina, Dragos Popa, Aspecte privind realizarea frezelor melc modul pentru degrosare, Tehnologii moderne, calitate, restructurare, TMCR-99, Chisinau, vol.4 ; 4. George Gherghina, Dragos Popa, Ludmila Sass, Rolul si locul CAD in pregatirea inginerului, Conferinta Internationala de Sisteme Electromecanice, SIELMEC’99, Chisinau 7-8 octombrie 1999 ; 5. Gherghina G., D. Popa, The measurement accuracy increasing for large dimensions controller, 6th IFAC Symposum - Robot Control SYROCO 2000, Vienna 21-23 sept., 2000; 6. Gherghina G , Popa D., The Use of Computer Aided Design in Concurrential Engineering, 3rd International Conference on Information Technology Based Higher Education and Traning, Budapest, Hungary, CD, July 4-6, 2002; 7. Gherghina G., D. Popa, M. Tudor, Aspects Concerning the Using of Concurrential Engineering in Product Design, 2nd International Conference Research and Development in Mechanical Industry RaDMI 2002, C-10, Vrnjacka Banja, Yugoslavia, ISBN 86-83803-03-1, 01-04 September 2002; 8. D. Popa, M. Tudor, Gherghina G., Aspects about Dynamic Analysis for Jumping Equivalent Mechanism Inspired from Nature, 2nd International Conference Research and Development in Mechanical Industry RaDMI 2002, C-20, pp. 662, Vrnjacka Banja, Yugoslavia, ISBN 86-83803-03-1, 01-04 September 2002; 9. M. Tudor, Gherghina G., D. Popa, Cinematic Analysis for a Mechanism which Made the Walking and Creeping Locomotion Characteristic for Lacertides Group, 2nd International Conference Research and Development in Mechanical Industry RaDMI 2002,C-27, pp.703, Vrnjacka Banja, Yugoslavia, ISBN 86-83803-03-1, 01-04 September 2002; 10. Dragos Popa, George Gherghina, Marin Tudor, Aspects about simulation and experimental results for a jumping mobile robot, 7th International Research/Expert Conference, - Trends in the Development of Machinery and Associated Technology-, TMT 2003, CD, Lloret de Mar, Barcelona, Spain, 15-16 September, 2003; 11. Dragos Popa, Iulian Iordachita, Aspects about some studies made on jumping mechanisms inspired from nature, 12th International Workshop on Robotics in Alpe-Adria-Danube Region, RAAD'03, CD, Cassino, Italy, May 7-10, 2003; 12. Popa D., Gherghina G. and Tudor M., Jumping movement simulation for an experimental model, 2nd DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC03, CD, Tuzla, Bosnia and Herzegovina, June 25-28, 2003; 13. Gherghina G., Popa D., Bogdan M., Aspects about the achievement of the hobbing cutter for roughing, International Conference - Power Transmission '03, Varna, Bulgaria, 11-12 septembrie 2003; 14. Dragos Popa, Iulian Iordachita, Aspects About The Kinematics Simulation For A Jumping Experimental Model, 13 th International Workshop on Robotics in Alpe-Adria-Danube Region RAAD'04, ISBN 80-7104-341-2, Brno University of Technology, Czech Republic, pp. 370-375 June 1-6, 2004; 15. Dragos POPA, George GHERGHINA and Marin TUDOR, An Experimental Method For Jumping Locomotion Analysis Used For Living Subjects, 4rd International Conference on Information Technology Based Higher Education and Traning ITHET'04, Istanbul, Turkey, 31th May - 02nd June 2004; 16. G. Gherghina, D. Popa, M. Bogdan and M. Tudor, The Modelling Of The Hobbing Cutter For The Groove Shafts, The IV International Congress - Mechanical Engineering Technologies "MET'04", pp. 162-165, ISSN 1310-3946, Varna, Bulgaria, 23 - 25 September 2004; 17. George Gherghina, Dragos Popa, Marin Tudor, Aspects About The Hob Cutter Design For Worm Wheel Toothing, TMT 2004-Adratica-Neum, CD, Bosnia & Hertzegovina, sept 2004; 18. Tarnita D., Popa D., Tarnita D.N., Preoteasa T., Study Of The Three-Dimensional Model Of The Human Knee Joint, Biomaterials and Biomechanics, Fundamentals and Clinical Applications, pp.34, Essen, Germany, September 21-23, 2005;

10

19. Tarnita D., Tarnita D.N., Popa D., Grecu D., Tarnita R., The Method of Finite Element Applied to the Study of Stress Distribution of Tibia, Biomaterials and Biomechanics: Fundamentals and Clinical Applications, pp.165, Essen, September 21-23, 2005 ; 20. G., Gherghina, D., Popa, M., Bogdan, M., Tudor, Modern measurement by coordinate measuring machines, 5 th International Scientific Conference on Production Engineering, RIM 2005, CD, 14-17 September, Bihac, Bosnia & Hertegovina; 21. Dragos Popa, Daniela Tarnita, Danut Tarnita and Iulian Iordachita, About the Simulation of the Human Knee Joint, The 15th International Workshop on Robotics in Alpe-Adria-Danube Region, RAAD'06, CD, Balatonfüred, Lake Balaton, Hungary, 15-17 iunie 2006; 22. Gherghina George, Popa Dragos, Bogdan Mihaela, About Education In The Engineering Graphics, The 7 th International Conference on Information Technology Based Higher Education and Training, The University of Technology, CD, Sydney, Australia, 10-13 July, 2006; 23. Tarnita, D., Popa D., Tarnita, D. N., Adam, D., Bizdoaca, N., Considerations on the dynamic simulation of the 3D model of the human knee joint, 9th Essen Symposium on Biomaterials and Biomechanics, BIO Materialien Interdisciplinary Journal of Functional Materials, Biomechanics and Tissue Engineering, pp 231, ISSN 1616-0177, VNM Science Publishing GmbH & Co. KG, Postfach 46 08 05, D-80916, München, Fachinformation Technik - Literaturnachweise aus der Datenbank TEMA Technik und Management, Essen, Germany, 5-8 sept. 2006; 24. Tarnita, D.N., Adam, D., Popa, D., Tarnita, D., Tarnita, R., The CAD Method and the Finite Elements Method used for spatial models of human bones, 9th Essen Symposium on Biomaterials and Biomechanics, BIO Materialien Interdisciplinary Journal of Functional Materials, Biomechanics and Tissue Engineering, pp 230, ISSN 1616-0177, VNM Science Publishing GmbH & Co. KG, Postfach 46 08 05, D-80916, München, Fachinformation Technik - Literaturnachweise aus der Datenbank TEMA Technik und Management, Essen, Germany, 5-8 sept. 2006; 25. Mihaela-Liana BOGDAN, George GHERGHINA, Dragos POPA, Aspects Concerning Virtual Prototyping For Some Mechanisms From Landing Gear System, 11th European Automotive Congress - Automobile for the Future -, 30 May - 1 June 2007, CD, Budapest, Hungary; 26. Tarniţă Daniela, Dragos Popa, Dan Tarniţă, Dan Grecu, The three-dimensional models of the femural and tibial prosthesis components, The 8th EUROPEAN Congress on Ortopedics, EFORT, Firenzze, Italy, mai 2007; 27. G., Gherghina, M., Bogdan, D. Popa, Aspects concerning graphical education quality management in the engineering training process, 5 th Research/Expert Conference with International Participation, Quality 2007, CD, Neum, Bosnia & Hertegovina, June 06-09, 2007; 28. D., Tarnita, D.N. Tarnita, D., Popa, D., Adam, About the Kinematic and Dynamic Simulation of the 3D Model of the Human Knee Joint, 7 th Central European Othopaedic Congress 2008, CEOC’2008, Bratislava, Book of Abstracts, pp.38, Slovak Republic, 24-26 January 2008; 29. D. Tarnita, D. Popa, D.N. Tarnita, D. Adam, F. Cismaru, Contribution on the Dynamic Simulation of the Virtual Model of the Human Knee Joint, 10th Essen Symposium on Biomaterials and Biomechanics, Biomaterials NRW 2008, Materialwissenschaft und Werkstofftechnik Journal, pp.115-117, ISSN 1616-0177, VNM Science Publishing GmbH & Co. KG, Postfach 46 08 05, D-80916, München, Fachinformation Technik - Literaturnachweise aus der Datenbank TEMA Technik und Management, Essen, Germany, 12-14 March 2008; 30. D. Tarnita, D. Popa, R. M. Tarnita, M. Negru, C.Boborelu, Stresses and displacements of forearm bones using finite element method, 3rd International Conference on Biomaterials and Medical Devices - BIOMMEDD'2008, pp. 318, Bucuresti, nov.2008, ISBN 978-606-521-131-5; 31. D. Tarnita, D. N. Tarnita, D. Popa, L.Dumitrescu, C. Berceanu, Modular dynamic compresion plate based on intelligent materials, 3rd International Conference on Biomaterials and Medical Devices - BIOMMEDD'2008, pp. 319, Bucuresti, nov.2008, ISBN 978-606-521-131-5; 32. D. Tarnita, D.N. Tarnita, N. Bizdoaca, D. Popa, Modular Adaptive Bone Plate Based on Intelligent Materials, 11th International and Interdisciplinary Symposium, Biomaterials and Biomechanics: Fundamentals and Clinical Applications 2009 Essen, March, 5th - 7th, 2009, University Duisburg-Essen, Germany.

11

33. Gabriel Buciu, Dragos-Laurentiu Popa, Dragos Niculescu, George Gherghina, Calin Daniel Cosmin, Dragos Tutunea, Virtual and rapid prototyping methods applied in orthopaedics, The 5th ICGG Conference, Mongeometrija 2016, Proceedings, Belgrade, Serbia, 23-26 June 2016 d3) Studii publicate în volumele (cu ISBN) unor conferinţe internaţionale desfăşurate în ţară

1. G. Gherghina, D. Popa, Tehnici moderne de masurare a formelor si dimensiunilor geometrice, The International Symposium Quality and Standardisation, Bucuresti, 16-17 septembrie, 1999;

2. George Gherghina, Dragos Popa, Methodologie pour la determination des pulsations propres de la structure portante d’une machine de mesurer en coordonnees, BEYOND 2000, International Conference, 25-26 noiembrie 1999, Sibiu;

3. D. Popa, Results interpretation obtained using jumping locomotion study with images analysis method, The eight IFToMM International Symposium on Theory of Machines and Mechanisms, Bucuresti, pp.273 - 276, august 28 - septembrie 1, 2001;

4. D. Popa, M. Tudor, Description for an images analysis method applied to some subjects from living nature, The eight IFToMM International Symposium on Theory of Machines and Mechanisms, Bucuresti, pp.277 - 280, august 28 - septembrie 1, 2001;

5. Dragos POPA, George GHERGHINA, Marin TUDOR, Aspects About a CAD/CAE Method for Welding Assemblies, Tehnonav 2004, Constanta, Volume 6, Tom I, ISSN 1223-7221, pp. 335-340, 2004;

6. D. Popa, M. Tudor, Position Analysis of an Experimental Model Created for Jumping Locomotion Studies, Robotica 2004, A 2-a Conferinta Internationala de Robotica, pp. 155, ISBN 973-97258-3-X, Timisoara, 14-16 octombrie 2004 ;

7. M. Tudor, D. Popa, G. Gherghina, A Kinematical Study For A Walking And Creeping Experimental Model, Robotica 2004, A 2-a Conferinta Internationala de Robotica, pp. 155, ISBN 973-97258-3-X, Timisoara, 14-16 octombrie 2004 ;

8. Popa D., Gherghina G., Tudor M., Tarnita D., A 3D Graphical Modelling Method For Human Femurus Bone, International Conference On Engineering Graphics And Design 2005, pp. 89, ISBN 973-648-471-8, Bucharest, 9th - 108th June 2005;

9. Popa D., Bogdan M., Gherghina G., Tudor M., A 3D Modelling Method Of A Landing System And Preparing For Kinematical Simulation, International Conference On Engineering Graphics And Design 2005, pp. 85, ISBN 973-648-471-8, Bucharest, 9th - 108th June 2005;

10. Gherghina G., Popa D., Tudor M., Engineering Graphics Education According To The Bologna Model, International Conference On Engineering Graphics And Design 2005, pp. 463, ISBN 973-648-471-8, Bucharest, 9th - 108th June 2005;

11. Popa D., Tarnita D., Iordachita I., Study Method For Human Knee Applicable To Humanoid Robots, 14th International Workshop on Robotics in Alpe-Adria-Danube Region, pp.485-490, ISBN 973-718-241-3, Bucharest May 26-28, 2005;

12. G., Gherghina, D., Popa, M. Bogdan, C. Gluga, Sensors used at vehicle instalations supplied with LPG (part one), International Scientific Conference, COMEFIM 8, pp.497, vol.II, ISSN 1221-5872, Cluj-Napoca, Romania, 8 - 10 Iunie 2006;

13. G., Gherghina, D., Popa, M. Bogdan, C. Gluga, Sensors used at vehicle instalations supplied with LPG (part two), International Scientific Conference, COMEFIM 8, pp.503, vol.II, ISSN 1221-5872, Cluj-Napoca, Romania, 8 - 10 Iunie 2006;

14. Dragos POPA, Daniela TARNITA, Danut TARNITA, The Kinematical And Dynamical Simulation Of The Human Knee Joint In The Classical Locomotion Types, International Scientific Conference, COMEFIM 8, pp.707, vol.II, ISSN 1221-5872, Cluj-Napoca, Romania, 8 - 10 Iunie 2006;

12

15. Dragos POPA, George GHERGHINA, Daniela TARNITA, Danut TARNITA, The Cad Method Used For Three-Dimensional Model Of The Tibia Bone, International Scientific Conference, COMEFIM 8, pp.701, vol.II, ISSN 1221-5872, Cluj-Napoca, Romania, 8 - 10 Iunie 2006;

16. Daniela TARNITA, Dragos POPA, Danut TARNITA, The Cad Method Used For Three-Dimensional Model Of The Tibial Prosthesis Element, International Scientific Conference, COMEFIM 8 , pp.719, vol.II, ISSN 1221-5872, Cluj-Napoca, Romania, 8 - 10 Iunie 2006;

17. Dragos POPA, George GHERGHINA, Mihaela-Liana BOGDAN, About The Virtual Simulation Of The Human Knee Joint, THE 2nd INTERNATIONAL CONFERENCE ON ENGINEERING GRAPHICS AND DESIGN,- ICEGD, 2007- , pp. 349-352, ISBN 978-973-667-252-1, June 7-10, 2007, Galati, ROMANIA;

18. George GHERGHINA, Dragos POPA, Mihaela-Liana BOGDAN, Cristian GLUGA, About Modern Technical Graphics Using in the Virtual Prototyping, THE 2nd INTERNATIONAL CONFERENCE ON ENGINEERING GRAPHICS AND DESIGN,- ICEGD, 2007 -, pp. 477-480, ISBN 978-973-667-252-1, June 7-10, 2007, Galati, ROMANIA;

19. George GHERGHINA, Dragos Laurentiu POPA and Mihaela Liana BOGDAN, Aspects about Diminution Noxa Process at Vehicles Produced by AUTOMOBILE CRAIOVA, TEHNONAV International Conference on Mechanical and Naval Engineering 22-24 of June, Volume X, Tom I, ISSN-1223-722, pp.244-247, 2008, Constanta, Romania;

18. Bogdan Mihaela-Liana, Popa Dragoş-Laurenţiu, Gherghina George, Simniceanu Loreta, Experimental Research About Dynamics Behaviour of Landing Gear, SMAT Craiova, pp.17-20, ISBN 978-606-510-253-8, ISBN 978-606-510-245-3, International Congress, Automotive, Safety and Environment, Second Edition, October 2008, Craiova;

19. Gherghina George, Popa Dragos, Mihaela Bogdan, Gluga Cristian, Tehnici de grafica moderna folosite in prototiparea virtuala, SMAT Craiova, pp. , ISBN 978-606-510-253-8, ISBN 978-606-510-245-3, International Congress, Automotive, Safety and Environment, Second Edition, October 2008,Craiova;

20. George GHERGHINA, Dragos POPA, Mihaela BOGDAN, The Simulation of the Measurement Process for a Complex Piece on the Coordinate Measuring Machine, International Carpathian Control Conference ICCC- 2008, Sinaia, ROMANIA, May 25-28, 2008.

21. BORGAZI Erdin, POPA DRAGOS, TUTUNEA DRAGOS, GHERGHINA George, BOGDAN Mihaela, Consideration about the Simulation of the Osteosynthesis for the Human Elbow Bones Using Metallic Implants, International Conference ICOME 2010, ISBN 978-606-510-879-0, Craiova, Romania 28th-29th of April 2010;

22. George Gherghina, Dragos Popa, Stefanita Ciunel, Virtual Prototyping of a car system used for impact simulations, The 10-th International Conference on Mechatronics and Precision Engineering, publicata in Scientific Journal of Romanian Society of Mechatronic, SROMECA, Mecatronica, no.2/2011, pg.1-6, Bucuresti, 19-21 May, ISSN 1583-7653;

23. D. Tarnita, D. Popa, N. Dumitru , D.N. Tarnita, V. Marcusanu, C. Berceanu, Numerical Simulations of the Virtual Human Knee Joint, 3-rd European Conference on Mechanism Science Technical University of Cluj-Napoca, EUCOMES 2010, Cluj-Napoca, September 14-18, 2010;

24. Stefanita CIUNEL, Dragos POPA, The simulation of the main movements of the Human Neck used for Virtual impact testing studies, CAR Pitesti 2011, 2-4 th of November 2011;

13

25. Stefanita CIUNEL, Dragos POPA, Ovidiu Vasile CAMPIAN, Vasile CAMPIAN - The comparative analysis of the two types of frames devices for dummy neck testing system, CAR 2011 Pitesti, 2-4 th of November 2011;

26. S. Ciunel, D.L. Popa, O.V. Campian, A COMPARATIVE STUDY FOR TWO TYPES OF FRAME USED FOR DUMMY NECK IMPACT TESTING DEVICE, pp. 361-366, The 4th International Conference “Advanced Composite Materials Engineering”, COMAT 2012, 18- 20 October 2012, Brasov, Romania, ISBN 978-973-131-164-7, LUX LIBRIS PUBLISHING HOUSE;

27. S. Ciunel, D.L. Popa, V. Campian, MATHEMATICAL MODEL OF THE DUMMY NECK INCLUDED IN A FRONTAL IMPACT TESTING SYSTEM, pp. 367-372, The 4th International Conference “Advanced Composite Materials Engineering”, COMAT 2012, 18- 20 October 2012, Brasov, Romania, ISBN 978-973-131-164-7, LUX LIBRIS PUBLISHING HOUSE;

28. G. Buciu, D.L. Popa, D. Grecu, D. Niculescu, R. Nemes, VIRTUAL COMPARATIVE STUDY ON THE USE OF NAILS AT THE FIXATION OF TIBIAL FRACTURES USING FINITE ELEMENT METHOD, pp. 381-386, The 4th International Conference “Advanced Composite Materials Engineering”, COMAT 2012, 18- 20 October 2012, Brasov, Romania, ISBN 978-973-131-164-7, LUX LIBRIS PUBLISHING HOUSE;

29. G. Buciu, D.L. Popa, D. Grecu, D. Niculescu, R. Nemes, COMPARATIVE ANALYSIS OF THE THREE NEW DESIGNS OF TIBIAL NAILS WHICH ELIMINATE THE USE OF ORTHOPEDIC SCREWS, pp. 387-392, The 4th International Conference “Advanced Composite Materials Engineering”, COMAT 2012, 18- 20 October 2012, Brasov, Romania, ISBN 978-973-131-164-7, LUX LIBRIS PUBLISHING HOUSE;

30. DUTA Alina, SASS Ludmila, POPA Dragos – Laurentiu, Some consideration about modeling a two floor building structure, Procedings of ICOME, Tome 2, ISBN 978-606-14-0692-0, pg. 627-630, ICOME 2013, Craiova, 16-17 mai, 2013;

31. POPA Dragos-Laurentiu, BUCIU Gabriel, GRECU Dan, GHERGHINA George, TUTUNEA Dragos, Three new designs of tibia nails which eliminate orthopedic screws, Procedings of ICOME, Tome 1, ISBN 978-606-14-0692-0, pg. 61-68, ICOME 2013, Craiova, 16-17 mai, 2013;

32. Ciunel Stefanita, Dumitru Nicolae, Popa Dragos-Laurentiu, Comparative analysis for two types of frames used for impact testing device, Procedings of ICOME 2013, Tome 2, ISBN 978-606-14-0692-0, pg. 437-442, ICOME 2013, Craiova, 16-17 mai, 2013;

33. Tutunea Dragos, Gherghina George, Popa Dragos Laurentiu, Thermal analysis of the engine piston made of aluminum alloys, Procedings of ICOME 2013, Tome 1, ISBN 978-606-14-0692-0, pg. 79-82, ICOME 2013, Craiova, 16-17 mai, 2013;

34. Mihaela-Liana Bogdan, Ionut Geonea, Loreta Simniceanu, Victor Otat, Dragos Laurentiu Popa, The Dynamic Study for the Helicoidal Spring of the Macpherson Automotive Suspension, PROCEEDINGS OF SMAT CRAIOVA, PP. 67-74, TOME 1, 23-25 OCT. 2014;

35. Stefanita Ciunel, Nicolae Dumitru, Dragos-Laurentiu Popa, Gheorghe Popa-Mitroi, Walter Thierheimer, Mathematical Model of a Dummy Neck-Head System Included in a Frontal Impact Testing Device, PROCEEDINGS OF SMAT CRAIOVA, PP. 201-206, TOME 1, 23-25 OCT. 2014;

36. Stefanita Ciunel, Nicolae Dumitru, Bebe Tica, Dragos-Laurentiu Popa, Gheorghe Popa Mitroi, Mihai-Aureliu Lungu, Analysis and Dynamic Human Cranio-Cervical Complex Movements, PROCEEDINGS OF SMAT CRAIOVA, PP. 235-242, TOME 1, 23-25 OCT. 2014;

14

37. George Gherghina, Dragos Tutunea, Nicholas Lambrache, Dragos Popa, About Mechatronics in the Engineering Education at the Faculty of Mechanics Craiova, PROCEEDINGS OF SMAT CRAIOVA, PP. 87-90, TOME 2, 23-25 OCT. 2014;

38. Dragos-Laurentiu Popa, Alina Duta, Dragos Tutunea, George Gherghina, Gabriel Buciu, Virtual Methods Used for the Human Bones and Joints Reconstruction. Virtual Innovative Tibia Nails, PROCEEDINGS OF SMAT CRAIOVA, PP. 91-96, TOME 2, 23-25 OCT. 2014.

d4) Studii publicate în volumele altor conferinţe internaţionale desfăşurate în străinătate sau în ţară

1. Gherghina G, D. Popa, Sensors and actuators used in the motor-vehicles construction, University's days, International Scientific Conference, Tg-Jiu, CD, 24-26 may 2002;

2. D. Popa, Gherghina G., Jumping robot mechanisms based on living subjects studyies, University's days, International Scientific Conference, Tg-Jiu, CD, 24-26 may 2002;

3. Dragos Popa, Marin Tudor, George Gherghina, Studies about jumping locomotion in the nature for the obtaining mobile robots, The 28th Annual American Romanian Academy of Arts and Sciences Congress, vol.II, pp. 927-930, ISBN 2-553-01137-7, Targu Jiu, 3-5 iunie 2003;

4. Mihaela-Liana Bogdan, Dragos Popa, Aspects on kinematical and kineto-statical analysis of a shaping mechanism, The 28th Annual American Romanian Academy of Arts and Sciences Congress, vol.II, pp.931-934, ISBN 2-553-01137-7, Targu Jiu, 3-5 iunie 2003;

5. D. Popa, M. Tudor, G. Gherghina, Ecuatii de miscare ale deplasarii prin salt întâlnite în natura, determinate prin analogie cu modele mecanice simplificate, A 7-a Conferinta Internationala de Mecatronica si Mecanica Fina, Comefim 7, pp. 97-98, ISBN 973-86886-1-2, Bucuresti, 27-29 mai 2004;

6. George Gherghina, Constantin Anton Micu, Dragos Popa, Aspecte privind analiza dinamica a portalului unei masini de masurat în coordonate de mari dimensiuni, A 7-a Conferinta Internationala de Mecatronica si Mecanica Fina, pp. 225-226, ISBN 973-86886-1-2, Comefim 7, Bucuresti 27-29 mai 2004;

7. M. Tudor, D. Popa, G. Gherghina, Analiza cinematica a unui mecanism virtual de pasire cu târâre caracteristic familiei lacertidelor, A 7-a Conferinta Internationala de Mecatronica si Mecanica Fina, pp. 105-106, ISBN 973-86886-1-2, Comefim 7, Bucuresti, 27-29 mai 2004.

d5) Studii publicate în volumele unor conferinţe naţionale

1. Popa Dragos, Sass Ludmila, Mogosanu Gelica, Aplicatii ale geometriei descriptive si desenului tehnic rezolvate cu AUTOCAD si AUTOLISP, Al 3-lea seminar national de GD+DT - Cluj Napoca, oct.1992;

2. Popa Dragos, Mogosanu Gelica, Intersectii si desfasurate de corpuri geometrice rezolvate cu Autocad Release 12, Al 4-lea seminar national de GD+DT - Iasi 1994;

3. Ion Alexandru Ene, Dragos Popa, Mogosanu Gelica, Sectiuni in corpuri geometrice si intersectii de placi rezolvate cu Autocad Release 12, Al 4-lea seminar national de GD+DT - Iasi 1994;

4. D. Neagoe, D.Popa, G. Mogosanu, Intersectii si desfasurate de corpuri geometrice rezolvate cu Autocad Release 12, Al 4-lea seminar national de GD+DT - Iasi 1994;

5. Popa Dragos, Mogosanu Gelica, Programe Autolisp pentru generarea unor curbe clasice, Al 4-lea seminar national de GD+DT - Iasi 1994;

6. Popa Dragos, Sass Ludmila, Intersectii de corpuri cu AutoCAD Release 12, Al 4-lea Seminar national de GD+DT - Iasi 1994;

7. Neagoe Dumitru, Mogosanu Gelica, Popa Dragos, Program AUTOLISP pentru hiperboloizi cu o singura panza, A 3-a Conferinta Nationala de tehnologii si metode moderne de proiectare in constructia de masini - Craiova 1994;

15

8. George Gherghina, Dragos Popa, Generarea parametrizata a modelelor de masini de masurat in coordonate cu portal utilizand proiectarea asistata, Al 5-lea Simpozion de Geometrie Descriptiva, Desen, Design si Grafica Asistata de Calculator - Timisoara 1996;

9. G. Stanescu, A. Dinca, D. Popa, G. Gherghina, D. Neagoe, Reprezentarea in proiectie axonometrica prin metoda rabaterii si rotatiei planului axonometric utilizand Autocad R12, Al 5-lea Simpozion de Geometrie Descriptiva, Desen, Design si Grafica Asistata de Calculator - Timisoara 1996;

10. George Gherghina, Dragos Popa, Metodologie de reprezentare a asamblarilor filetate utilizand AutoCAD R12, Al 5-lea Simpozion de Geometrie Descriptiva, Desen, Design si Grafica Asistata de Calculator - Timisoara 1996;

11. D. Neagoe, G. Stanescu, A. Dinca, D. Popa, G. Gherghina, O propunere de aplicare a standardului SR ISO 7200, Al 5-lea Simpozion de Geometrie Descriptiva, Desen, Design si Grafica Asistata de Calculator - Timisoara 1996;

12. A. Dinca, G. Stanescu, G. Gherghina, D. Neagoe, D. Popa, Exercitii de design utilizand programul 3DStudio V2.0, Al 5-lea Simpozion de Geometrie Descriptiva, Desen, Design si Grafica Asistata de Calculator - Timisoara 1996;

13. George Gherghina, Dragos Popa, Utilizarea graficii asiatate de calculator in analiza comportarii statice a unor sisteme mecanice, Al VI-lea Simpozion de Geometrie Descriptiva si Grafica Inginereasca Computerizata,cu participare internationala, Bucuresti, iunie 1998;

14. Dragos Popa, Marin Tudor, Generarea parametrizata a modelului unui batracian pentru analiza cinematica a biomecanismelor componente, Al VI-lea Simpozion de Geometrie Descriptiva si Grafica Inginereasca Computerizata,cu participare internationala, Bucuresti, iunie 1998;

15. George Gherghina, Dragos Popa, Simularea grafica a procesului de masurare a unui reper complex pe o masina de masurat in coordonate cu portal, Al VI-lea Simpozion de Geometrie Descriptiva si Grafica Inginereasca Computerizata,cu participare internationala, Bucuresti, iunie 1998;

16. Marin Tudor, Dragos Popa, Generarea parametrizata a modelului tridimensional a unei lacertide pentru analiza cinematica a biomecanismelor componente, Al VI-lea Simpozion de Geometrie Descriptiva si Grafica Inginereasca Computerizata,cu participare internationala, Bucuresti, iunie 1998;

17. Dragos Popa, Aspecte referitoare la deplasarea prin salt a vietuitoarelor, A IV-a Conferinta, cu participare internationala, " Tehnologii si metode moderne de proiectare in constructia de masini, Craiova, octombrie 1998 ;

18. Marin Tudor, Dragos Popa, Biblioteca automata parametrizata de suruburi si piulite tridimensionale sub Autocad R14, A IV-a Conferinta, cu participare internationala, " Tehnologii si metode moderne de proiectare in constructia de masini, Craiova, octombrie 1998 ;

19. Dragos Popa, Marin Tudor, Program Autolisp pentru generarea automata tridimensionala a rotilor dintate, A IV-a Conferinta, cu participare internationala, " Tehnologii si metode moderne de proiectare in constructia de masini, Craiova, octombrie 1998 ;

20. George Gherghina, Dragos Popa, Simularea procesului de m[surare a unui reper complex pe masina de masurat in coordonate, A IV-a Conferinta, cu participare internationala, " Tehnologii si metode moderne de proiectare in constructia de masini, Craiova, octombrie 1998 ;

21. George Gherghina, Dragos Popa, Masinile de masurat in coordonate - sublerele mileniului al treilea, TEHNOS X 99, Suceava 1999 ;

22. George Gherghina, Dragos Popa, Reprezentarea parametrizata 3D a rotilor dintate, TEHNOS X 99, Suceava 1999 ;

23. George Gherghina, Dragos Popa, Modelarea frezelor melc pentru arbori canelati, TEHNOS X 99, Suceava 1999 ;

16

24. George Gherghina, Dragos Popa, Generarea computationala a unor repere complexe, TEHNOS X 99, Suceava 1999 ;

25. George Gherghina, Dragos Popa, Solutii constructive pentru compensarea erorilor termice la masinile de masurat in coordonate, A IX-a Conferinta nationala de termotehnica, Craiova 1999 ;

26. George Gherghina, Dragos Popa, Aspecte privind compensarea erorilor termice la masinile de masurat in coordonate, A IX-a Conferinta nationala de termotehnica, Craiova 1999 ;

27. George Gherghina, Dragos Popa, Aspecte privind realizarea parametrizata a sabloanelor plane complexe, Oradea, 1999;

28. Dragos Popa, George Gherghina, Marin Tudor, Modelarea parametrizata a unor mecanisme generatoare de traiectorii la roboti, Academia Militara, Bucuresti,1999;

29. Dragos Popa, George Gherghina, Marin Tudor, O abordare computationala a unor grupe structurale din componenta mecanismelor, Academia Militara, Bucuresti,1999;

30. George Gherghina, Dragos Popa, Stabilirea pulsatiilor proprii ale portalului unei masini de masurat in coordonate de mari dimensiuni, Academia Militara, Bucuresti,1999;

31. George Gherghina, Dragos Popa, Analiza vibratiilor libere ale portalului unei masini de masurat in coordonate, Academia Militara, Bucuresti,1999;

32. G.Gherghina, D. Popa, Folosirea graficii asistate la realizarea formei cutitelor pentru mortezat dantura cilindrica, A 7-a Conferinta nationala cu participare internationala, GRAFICA 2000, Craiova, vol II, sectiunea a V-a, pp. 743-748, 19-21 oct. 2000;

33. G. Gherghina, D. Popa, C. Dumitru, Noi posibilitati de generare parametrizata a rotilor dintate cu dantura curvica, A 7-a Conferinta nationala cu participare internationala, GRAFICA 2000, Craiova, vol II, sectiunea a V-a, pp. 749-754, 19-21 oct. 2000;

34. D. Popa, G. Gherghina, M. Calbureanu, Realizarea unui ansamblu complex-reductor cu roti dintate-utilizand Solidworks, A 7-a Conferinta nationala cu participare internationala, GRAFICA 2000, Craiova, vol II, sectiunea aV-a, pp. 899-904, 19-21 oct. 2000;

35. D. Popa, G. Gherghina, Aspecte privind pregatirea inginerului in domeniul infograficii, A 7-a Conferinta nationala cu participare international, GRAFICA 2000, Craiova, vol I, sectiunea I, pp. 59-66, 19-21 oct. 2000;

36. Madalina CALBUREANU, Dragos POPA, Analiza cinematica, dinamica si simularea unui mecanism biela manivela cu glisiera folosind programe CAD, A 7-a Conferinta nationala cu participare international, GRAFICA 2000, Craiova,

37. I. Popescu, D. Popa, Mecanisme biologice de salt, utilizabile la roboti mobili, Al XV-lea Simpozion National cu participare internationala, ROBOTICA 2000, Oradea;

38. Iulian POPESCU, Dragos POPA, Cercetari privind biomecanismele locomotiei prin salt cu aplicabilitate la roboti mobili, Workshop Mobile Robots, ISBN 973-8043-39-5, Craiova 2001 ;

39. G. Catrina, I. Iordachita, D. Popa, Consideratii privind proiectarea optimala a organelor de masini, Prima conferinta cu participare internationala a mileniului, SMAT 2001, pp. 331-336, Craiova, 8-9 noiembrie, 2001 ;

40. D. Grecu, A. Popa, D. Niculescu, Anusca. D., S. Didu, Z. Civic Experienta Clinicii de ortopedie si traumatologie din Craiova in osteosinteza centromedulara a fracturilor diafizare ale oaselor antebratului, Craiova Medicala, 3, 1, 32-36, 2001, ISSN 1454-6876;

41. Dragos Popa, Aspects About Dynamic Simulation For A Jumping Mechanism, Conferinta Nationala de Robotica CNR, pp. 37, ISBN 973-8043-165-5, 17-19 oct. 2002, Craiova;

42. Dragos Popa, George Gherghina si Marin Tudor, Aspecte privind obtinerea pe baza modelelor din lumea vie a schemelor cinematice echivalente pentru robotii care se deplaseaza prin salt, 6th COMEFIM Conference on Fine Mechanic and Mechatronic, pp. 217-224, ISSN 1220-6830, Brasov 10-12 October, 2002;

43. Dragos Popa, George Gherghina si Marin Tudor, Consideratii privind studiul locomotiei prin salt folosind analiza imaginilor, 6th COMEFIM Conference on Fine Mechanic and Mechatronic, pp. 417-422, ISSN 1220-6830, Brasov 10-12 october, 2002;

17

44. Dragos POPA, George GHERGHINA, Marin TUDOR, Realizarea ansamblurilor sudate folosind grafica asistata, Al VIII-lea Simpozion National -cu participare internationala-, GRAFICA TEHNICA SI DESIGN, GTD, pp.229-234, Brasov, 5-7 iunie 2003;

45. George GHERGHINA, Dragos POPA, Marin TUDOR, Folosirea graficii asistate la reprezentarea elementelor filetate, Al VIII-lea Simpozion National -cu participare internationala-, GRAFICA TEHNICA SI DESIGN, GTD, pp.229-234, Brasov, 5-7 iunie 2003.

e) Invenţii e1) Brevete de inventie

1. Tarniţă Dănuţ Nicolae, Tarniţă Daniela, Boborelu Cristian, Popa Dragoş Laurenţiu, Cerere Brevet de inventie Nr. 129147 din 11 iulie 2013, Proteză de cot tip cuplă sferică, data publicarii: 30.01.2014, BOPI 1/2014, data eliberarii 30.08.2018

e2) Cereri de brevete de invenţie

1. Ciunel Stefanita, Popa Dragos-Laurentiu, Dumitru Sorin, Thierheimer Camelia Diana, Thierheimer Walter Wilhelm, Cerere de brevet de inventie OSIM NR. A/00591/13-08-2013, Sistem tehnic de tip pendul pentru testarea zonei cranio-cervicale a manechinelor de testare; 2. Ciunel Stefanita, Popa Dragos-Laurentiu, Dumitru Sorin, Thierheimer Camelia Diana, Thierheimer Walter Wilhelm, Cerere de brevet de inventie OSIM NR. a/00592/13-08-2013, Sistem tehnic gat biofidelic al manechinelor de testare pentru incercari experimentale. 3. Buciu Gabriel, Popa Dragos-Laurentiu, Nemes Raducu Nicolae, Grecu Dan Cristian, Tijă intramedulară pentru tibie cu șuruburi penetrante antrenate de mecanisme cu pinioane conice, cerere de brevet A/00173/2018 din 12.03.2018.

f) Proiecte de cercetare-dezvoltare pe bază de contract/grant f1) Granturi/contracte de cercetare-dezvoltare internaţionale obţinute prin competiţie f2) Proiecte educaţionale internationale obţinute prin competiţie 1. Proiect Leonardo, New Applications and Course Materials for Prosthetic Dentistry, Implant Dentistry and Biomedical Engineers,2012-1-TR1-LEO05-35166 - BIO-DENT, parteneri interni: Universitatea din Craiova, Universitatea de Medicina si Farmacie din Craiova, 2012-2014, membru f3) Granturi/contracte de cercetare naţionale obţinute prin competiţie

1. Elaborarea modelului tridimensional al articulatiei genunchiului si pregatirea acestuia pentru analiza cinematica, Proiectul: Sistem parametrizat CAD/CAE pentru determinarea prin simulare si analiza a caracteristicilor mecanice şi cinematice ale genunchiului uman in vederea protezarii (Grant CNCSIS), Faza I cod CNCSIS 282, comisia 2, 130 000 000 lei, membru in echipa de cercetare, 2004; 2. Simularea cinematica a articulatiei genunchiului. Modelarea protezei. Simularea cinematica a genunchiului protezat, Proiectul: Sistem parametrizat CAD/CAE pentru determinarea prin simulare şi analiza a caracteristicilor mecanice şi cinematice ale genunchiului uman in vederea protezării (Grant CNCSIS), Faza a II-a, cod CNCSIS 282, comisia 2, 389 000 000 lei, membru in echipa de cercetare, 2005; 3. Platforma de cercetare multidisciplinara in domeniul materialelor, proceselor si tehnologiilor inovative, Autoritatea Nationala pentru Cercetare Stiintifica, nr. Inregistrare electronica 160, responsabil proiect Vladimirescu Ion, depusa in cadrul POS-CCE- axa II-CDI, competitia

18

POSCCE-A2-O2.2.1+Capacitati-1-2007-2, valoare 54.452.660 RON, membru in echipa de implementare la Laboratorul de Mecatronica autovehiculelor si prototipare virtuala, 2007; 4. Laborator pentru analiza si simularea sistemelor biologice, Program IMPACT A nr 1073, valoare 492.698,5 Euro, Director, 2008-2013; 5. Laborator pentru Studii şi Analize Virtuale şi Operaţionale ale Sistemelor de Susţinere şi Rulare ale Autovehiculelor şi Aeronavelor, Program IMPACT A nr 1044, valoare 617 794 Euro, Director Mihaela-Liana Bogdan, membru in echipa de implementare, 2008-2013; 6. Laborator de Prototipare Virtuala si Mecatronica Automobilelor, Program IMPACT A nr 1067, valoare 579 330 Euro, Director George Gherghina, membru in echipa de implementare, 2008-2013; 7. Implanturi ortopedice modular adaptive, bazate pe materiale inteligente - Grant PNCDI Idei, Cod 92, PN–II–ID–PCE–2007, 2007-2010, Director grant: Daniela Tarnita, buget 2008: 38.206 RON, buget total: 945.000 RON, colaborator, 2008; 8. Dezvoltarea de modele şi metode de identificare şi conducere a sistemelor biotehnologice şi biologice - Grant PNCDI Idei, Cod CNCSIS 548, colaborator, 2009-2011.

f4) Contracte naţionale cu firme şi institute de cercetări

1. Implementarea si dezvoltarea productiei de ambalaje flexibile din polietilena si polipropilena, dosar nr. 13, Agentia de Dezvoltare Regionala, SV - Oltenia, Program Phare - Coeziune Economica si Sociala, Linie de buget RO-0007.02, Valoare totala a proiectului : 89.300 euro din care 49.300 euro nerambursabil, perioada de implementare : 2001-2005, Beneficiar : Oltenia Plast 2000 SRL, Craiova, Sef de proiect in Consiliul de implementare, Faza 4 : Organizarea licitatiei pentru utilaje. Finalizarea proiectului de amplasament pentru utilaje. Achizitia utilajelor. Amplasarea utilajelor. Probe tehnologice, 2004;

2. Implementarea si dezvoltarea productiei de ambalaje flexibile din polietilena si polipropilena, dosar nr. 13, Agentia de Dezvoltare Regionala, SV – Oltenia, Program Phare – Coeziune Economica si Sociala, Linie de buget RO-0007.02, Valoare totala a proiectului : 89.300 euro din care 49.300 euro nerambursabil, Beneficiar : Oltenia Plast 2000 SRL, Craiova, Sef de proiect asistent in Consiliul de implementare – responsabil cercetare-dezvoltare, 2001-2003, proiect obtinut prin competitie regionala.

3. Macara portal fixa 5t, L=9 m, H=8 m, Contract nr.01/ 2005, Sfera SRL, Craiova, membru in echipa de cercetare-proiectare ;

4. Modelarea, simularea, proiectarea si executia unei masini de ambalat materiale granulate de foarte mare productivitate, contract nr.7/2006, nr. inregistrare 78/25.12.2006, 2007-2009, Faza 1: Modelarea, simularea si proiectarea unei masini de ambalat materiale granulate de mica productivitate, Fundatia Facultatii de Mecanica "GEORGE (GOGU) CONSTANTINESCU", finantator S.C. IPROCON S.R.L., director, valoare 11.200 Euro, valoare Faza 1: 3.800 Euro, 2007;

5. Modelarea, simularea, proiectarea si executia unei masini de ambalat materiale granulate de foarte mare productivitate, contract nr.7/2006, nr. inregistrare 78/25.12.2006, 2007-2009, Faza 2: Analiza comparativa a rezultatelor obtinute. Realizarea modelului experimental (masina de ambalat de mica productivitate), Fundatia Facultatii de Mecanica "GEORGE (GOGU) CONSTANTINESCU", finantator S.C. IPROCON S.R.L., director, valoare 11.200 Euro, valoare Faza 2: 3.700 Euro, 2008;

6. Modelarea, simularea, proiectarea si executia unei masini de ambalat materiale granulate de foarte mare productivitate, contract nr.7/2006, nr. inregistrare 78/25.12.2006, 2007-2009, Faza 3: Modelarea, simularea si proiectarea unei masini de ambalat de foarte mare productivitate, Fundatia Facultatii de Mecanica "GEORGE (GOGU) CONSTANTINESCU", finantator S.C. IPROCON S.R.L., director, valoare 11.200 Euro, valoare Faza 3: 3.700 Euro, 2009

19

7. Sistem parametrizat CAD-CAE prin simulare si analiza a caracteristicilor articulatiei cotului uman in vederea optimizarii protezelor de cot, Universitatea de Medicina si Farmacie din Craiova, beneficiar ARTEGO S.A., director conf.dr. Tarnita Danut Nicolae, durata 2008-2011, valoare 40.000 RON, membru in echipa de cercetare, 2008;

8. Sistem parametrizat CAD-CAE prin simulare si analiza a caracteristicilor articulatiei cotului uman in vederea optimizarii protezelor de cot, Universitatea de Medicina si Farmacie din Craiova, beneficiar ARTEGO S.A., director conf.dr. Tarnita Danut Nicolae, durata 2008-2011, valoare 40.000 RON, membru in echipa de cercetare, 2009.

9. Solutii optimizate de implanturi ortopedice. Contract nr.743/18.07.2013 intre UMF din Craiova si Sc. ARTEGO SA. Din Tg. Jiu, membru in echipa de cercetare

f5) Contracte interne Universitatea din Craiova: 1. MODEL BIOMECANIC VIRTUAL INOVATIV PENTRU TESTAREA COMPORTAMENTULUI CINEMATIC SI DINAMIC AL SISTEMULUI OSOS UMAN IN SITUATII NORMALE, ACCIDENTALE SAU PATOLOGICE (9C/27.01.2014),grant interdisciplinar, director 2. Cercetari privind imbunatatirea biofidelitatii manechinelor de testare a accidentelor rutiere, de optimizare a elementelor si dispozitivelor prin implementarea materialelor noi, inteligente, grant intern cercetare avansata, 12000 lei, director Ciunel Stefanita, membru cheie in echipa de ceretare, 2014. g) Alte lucrări şi contribuţii ştiinţifice

Propuneri de proiecte de cercetare-dezvoltare pe bază de grant:

1. Mana mecanica virtuala parametrizata obtinuta din conditii anatomice si cinematice utilizabila pentru roboti umanoizi si pentru protezare umana, (propunere grant CNCSIS - 2006, comisia 2 - 77 puncte), director de proiect; 2. Mediu virtual parametrizat pentru studierea comportamentului meniscurilor umane, simularea interventiilor chirurgicale si analiza protezarii, (propunere grant CNCSIS - 2007, comisia 6 - 81 puncte), director de proiect; 3. Model biomecanic virtual si experimental pentru studierea comportamentului cinematic si dinamic al membrului uman inferior in situatii normale, patologice, chirurgicale si post-chirurgicale, (propunere grant CNCSIS – martie 2008, proiect de cercetare exploratorie, comisia 2, 6, 2 – 83.95 puncte), director de proiect; 4. Cercetari privind elaborarea de metode avansate de proiectare si optimizare structurala a sistemelor de sustinere si rulare utilizate la aeronave si autovehicule, CNCSIS, Program PN-II-ID-PCE-2007-1, membru in echipa de cercetare, punctaj 78.8, 2007; 5. Cercetari privind elaborarea de metode avansate de proiectare si optimizare structurala a sistemelor de sustinere si rulare utilizate la autovehicule, CNCSIS, Program PN-II-ID-PCE-2008-2 , membru in echipa de cercetare, punctaj 81 , 2008. h). Citări în rev. ISI şi BDI h1). Citări în reviste ISI 1. Nicu George Bizdoaca, Dan Tarnita, Daniela Tarnita, Anca Petrisor, Elvira Bizdoaca, Modular Adaptive Bionics Structure, WSEAS TRANSACTIONS on BIOLOGY and BIOMEDICINE, Issue 9, Volume 5, September 2008, ISSN: 1109-9518, pp.229-238 (D.Popa, D. Tarnita, D.N. Tarnita, The generation of the three-dimensional model of the human knee joint, Romanian Journal of Morphology and embriology, Ed. Academiei Romane, vol. 46 no. 4, 2005, pp 279-282, ISSN 1220-0522.) 2. Daniela Tarnita, Cosmin Berceanu, Corina Tarnita, The Three-Dimensional Printing – a Modern

20

Technology Used for Biomedical Prototypes, MATERIALE PLASTICE - 47- Nr. 3, 2010, pp. 328-334 (TARNITA, D., TARNITA, D.N., POPA DR., GRECU, D., NICULESCU, DR., Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and embryology, 51, No.1, 2010, p. 145) 3. KARINA CRISTINA MARIN, KARLA NOEMY BERDICH-KUN), FERNANDA GENTIL, MARCO PARENTE), RENATO JORGE NATAL), HORIA ALIN MARIN, MARIOARA POENARU, DANIELA ROXANA POPA, Application of a finite element model in the diagnosis process of middle ear pathologies, Rom J Morphol Embryol 2014, 55(4):1511–1514, ISSN (print) 1220–0522, ISSN (on-line) 2066–8279, pp.1511-1514, Accepted: December 28, 2014 (Tarniţă D, Boborelu C, Popa D, Tarniţă C, Rusu L, The three-dimensional modeling of the complex virtual human elbow joint, Rom J Morphol Embryol, 2010, 51(3):489–495.) 4. Aydiner Kalaci, Vedat Uruc, Raif Özden, Ibrahim Gökhan Duman, Yunus Dogramaci, Serhat Karapinar and Mehmet Yaldiz, The Biocompatibility of Nitinol in Knee Joint Spaces and Femoral Tunnels: An Experimental Study in Rats, Journal of Hard Tissue Biology 23[3] (2014) 317-322, J.Hard Tissue Biology Vol. 23(3):317-322, 2014,© 2014 The Hard Tissue Biology Network Association, Printed in Japan, All rights reserved. CODEN-JHTBFF, ISSN 1341-7649, pp. 317-322, impact factor 0.17 (Tarnita D, Tarnita DN, Popa D, Grecu D, Tarnita R, Niculescu D and Cismaru F. Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples. Rom J Morphol Embryol 51: 145-150, 2010) 5. Zhang et al.: The relationship between lateral meniscus shape and joint contact parameters in the knee: a study using data from the Osteoarthritis Initiative. Arthritis Research & Therapy 2014 16:R27. IF 4.12 (Daniela T, Tarnita DN, Grecu D, Popa D, Rusu FI: Stresses and displacements for normal human knee menisci and for sectioned menisci using finite element method. Br J Sports Med 2011, 45:e1.) 6. Somkid Amornsamankul, Kamonchat Kaorapapong, Benchawan Wiwatanapataphee, Three-Dimensional Simulation of Femur Bone and Implant in Femoral Canal using Finite Element Method, INTERNATIONAL JOURNAL OF MATHEMATICS AND COMPUTERS IN SIMULATION, Issue 4, Volume 4, 2010, pp. 171-178 (N. G. Bizdoaca, D. Tarnita, D. Tarnita, D. Popa, and E. Bizdoaca,“Shape memory alloy based modular adaptive ortophedic impants,” in Proceedings of the 1st WSEAS International Conference on Biomedical Electronics and Biomedical Informatics. Rhodes, Greece: WSEAS, August 2008, pp. 188–195) 7. Sunghwan Kim, CONTACT STRESS ANALYSIS OF THE NATIVE RADIAL HEAD AND RADIAL HEAD IMPLANTS, PhD Thesis, University of Pittsburgh 2014 (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 8. Ciunel S., Tica B., Studies About Behavior of the Human Cervical—Head System During Frontal Crash Impact, Proceedings of the European Automotive Congress EAEC-ESFA, Springer, 2015 pp 665-676. (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 9. St Ciunel and B Tica, The virtual morphology and the main movements of the human neck simulations used for car crash studies, 7th International Conference on Advanced Concepts in Mechanical Engineering, IOP Conf. Series: Materials Science and Engineering 147 (2016) 012116 doi:10.1088/1757-899X/147/1/012116 (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 10. D. Tarnita, I. Geonea, A. Petcu, D. N. Tarnita, Numerical Simulations and Experimental Human Gait Analysis Using Wearable Sensors, International Workshop on Medical and Service Robots MESROB 2016: New Trends in Medical and Service Robots pp 289-304, 2016 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150)

21

11. B. Młocek , Z. Lekston, M. Zubko, J. Rak and K. Stróż, Phase Analysis of NiTi Shape Memory Wires and Computer Simulations of the Superelastic Effect, Proceedings of the XXIII Conference on Applied Crystallography, Krynica Zdrój, Poland, September 20–24, 2015, ACTA PHYSICA POLONICA A, Vol. 130, No. 4, 2015 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 12. Aydiner Kalaci, Vedat Uruc, Raif Özden, Ibrahim Gökhan Duman, Yunus Dogramaci, Serhat Karapinar and Mehmet Yaldiz, The Biocompatibility of Nitinol in Knee Joint Spaces and Femoral Tunnels: An Experimental Study in Rats, Journal of Hard Tissue Biology 23[3] 317-322, 2014 The Hard Tissue Biology Network Association Printed in Japan, All rights reserved. CODEN-JHTBFF, ISSN 1341-7649, 2014 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 13. Susumu Tokunaga, Renee D. Rogge, Scott R. Small, Michael E. Berend and Merrill A. Ritter, A Finite-Element Study of Metal Backing and Tibial Resection Depth in a Composite Tibia Following Total Knee Arthroplasty, J Biomech Eng 138(4), 041001 (Feb 12, 2016) (8 pages)Paper No: BIO-15-1349; doi: 10.1115/1.4032551, 2016 (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.) 14. Wanchalerm Tarapooma and Tumrong Puttapitukpornb, Stress Distribution in Human Tibia Bones using Finite Element Analysis, ENGINEERING JOURNAL Volume 20 Issue 3, ISSN 0125-8281 (http://www.engj.org/), pp.155-167, 2016. (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.)

15. S Ciunel, B Tica, The virtual morphology and the main movements of the human neck simulations used for car crash studies, IOP Conference Series: Materials Science and Engineering, 147 (2016) 012116 doi:10.1088/1757-899X/147/1/012116, 2016 (D Tarnita, DN Tarnita, N Bizdoaca, D Popa, Contributions on the dynamic simulation of the virtual model of the human knee joint, Materialwissenschaft und Werkstofftechnik 40 (1‐2), 73-81, 2009) 16. Garufi, Donatella, Analisi numerico sperimentali dell'inchiodamento endomidolalre bloccato per la sintesi di fratture diafisarie di tibia, PhD Thesis, UNIVERSITÀ DEGLI STUDI DI CATANIA FACOLTÀ DI INGEGNERIA Dipartimento di Ingegneria Industriale e Meccanica, 2011 (D Popa, DN Tarniţă, D Tarniţă, D Grecu, The generation of the three-dimensional model of the human knee joint, Rom J Morphol Embryol 46 (4), 279-281, 2005) 17. Nicu George Bizdoaca, Dan Tarniţă, Daniela Tarniţă, Anca Petrisor, Elvira Bîzdoacă, Modular Adaptive Bionics Structure, WSEAS TRANSACTIONS on BIOLOGY and BIOMEDICINE, Issue 9, Volume 5, pp. 229-238, 2008 (D Popa, DN Tarniţă, D Tarniţă, D Grecu, The generation of the three-dimensional model of the human knee joint, Rom J Morphol Embryol 46 (4), 279-281, 2005) 18. Mohsen Sharifi Renani, Munsur Rahman, Akin Cil, Antonis P.Stylianou, Ulna-humerus contact mechanics: Finite element analysis and experimental measurements using a tactile pressure sensor, Medical Engineering & Physics, Volume 50, December 2017, Pages 22-28 (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 19. Daniela Tarniţă, Dan Marian Calafeteanu, Ionuţ Daniel Geonea, Alin Petcu, Dănuţ-Nicolae Tarniţă, Effects of malalignment angle on the contact stress of knee prosthesis components, using finite element method, Rom J Morphol Embryol 2017, 58(3):in press, pp. 1-6, 2017 (D Tarnita, DN Tarnita, N Bizdoaca, D Popa, Contributions on the dynamic simulation of the virtual model of the human knee joint, Materialwissenschaft und Werkstofftechnik 40 (1‐2), 73-81, 2009)

22

20. In Lin, Limin Ma, Ye Zhu, Zefeng Lin, Zilong Yao, Yu Zhang, Chuanbin Mao, Assessment of fracture risk in proximal tibia with tumorous bone defects by a finite element method, Microscopy Research & Techniquue, 2017 - Wiley Online Library, DOI: 10.1002/jemt.22899 (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.) 21. Daniela Tarniţă, Dan Marian Calafeteanu, Ionuţ Daniel Geonea, Alin Petcu, Dănuţ-Nicolae Tarniţă, Effects of malalignment angle on the contact stress of knee prosthesis components, using finite element method, Rom J Morphol Embryol 2017, 58(3):in press, pp. 1-6, 2017 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 22. Daniela Tarniţă, Dan Marian Calafeteanu, Ionuţ Daniel Geonea, Alin Petcu, Dănuţ-Nicolae Tarniţă, Effects of malalignment angle on the contact stress of knee prosthesis components, using finite element method, Rom J Morphol Embryol 2017, 58(3):in press, pp.1-6, 2017 (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) h2). Citări în BDI 1. LI Zhong-ming, LI Jing-hua, ZU Shu-yu, ZHU Guang-jin, CHEN Ying-jie, The Establishment and Estimation of Chronic Unpredictable Stress Animal Model, JOURNAL OF KUNMING MEDICAL UNIVERSITY, 2009, 30(2) R285.5 (TARNITA D N;TARNITA D;POPA D, Analysis of stress and displacements of phalanx bone with the finite.element method 2005(1-2)) 2. Marius Catană and Daniela Tarniţă, Static Analysis of the Virtual Human Knee Joint Using FEM, BULETINUL INSTITUTULUI POLITEHNIC DIN IAŞI, Publicat de Universitatea Tehnică „Gheorghe Asachi” din Iaşi, Tomul LVIII (LXII), Fasc. 3, 2012 (Tarniţǎ, D., Tarniţǎ, D. N., Bizdoacǎ, N., Popa D., Considerations on the Dynamic Simulation of the Virtual Model of the Human Knee Joint. “Materialwissenschaft und Werkstofftechnik”, Materials Science and Engineering Technology, Special Edition Biomaterials, 40, 73-81 (2009).) 3. Marko VESELINOVIC, Dalibor STEVANOVIC, Miroslav TRAJANOVIC, Miodrag MANIC, Stojanka ARSIC, Milan TRIFUNOVIC, Dragan MISIC, METHOD FOR CREATING 3D SURFACE MODEL OF THE HUMAN TIBIA, 34th INTERNATIONAL CONFERENCE ON PRODUCTION ENGINEERING, 28. - 30. September 2011, Niš, Serbia, University of Niš, Faculty of Mechanical Engineering (TARNITA, D., POPA, D., TARNITA, D. N., GRECU, D. (2006) CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol.47, pp 181-186) 4. M.R. Hassan, M. Mehrpouya, S. Emamian, M.N. Sheikholeslam, Review of Self-Healing Effect on Shape Memory Alloy (SMA) Structures, Advanced Materials Research (Volume 701), pp. 87- 92, DOI: 10.4028/www.scientific.net/AMR.701.87, 2013 (Tarnita D., Tarnita D.N., Bizdoaca N., Popa D., Tarnita C.E., Cismaru F., Modular Orthopedic Devices Based on Shape Memory Alloys, SYROM 2009: Proceedings of the 10th IFToMM International Symposium on Science of Mechanisms and Machines, held in Brasov, Romania, october 12-15, Springer 2009) 5. Dalibor Milojko Đenadić, Miodrag T. Manić, Dejan I. Tanikić, Saša S. Ranđelović, Petar S. Đekić, Analiza i prikaz vrsta fiksatora u medicini kao i metoda obrade materijala za izradu fiksatora, doi:10.5937/vojtehg61-2093, Assestant SouthEast, European Journal Production Assistant. (Tarnita, D., Tarnita, D.N., Bizdoaca, N., Popa, D., 2009, Modular adaptive bone plate based on intelligent materials, In: 11th Essen Symposium on Biomaterials and Biomechanics Fundamentals and Clinical Applications, Essen, pp. 120-103, March 5-7) 6. Sunghwan Kim, CONTACT STRESS ANALYSIS OF THE NATIVE RADIAL HEAD AND RADIAL HEAD IMPLANTS, dissertation, UNIVERSITY OF PITTSBURGH, SWANSON SCHOOL OF ENGINEERING, April 29, 2014. (Tarniţă D, Boborelu C, Popa D, Tarniţă C, Rusu L, The three-dimensional modeling of the complex virtual human

23

elbow joint, Rom J Morphol Embryol, 2010, 51(3):489–495.) 8. Nicu George Bizdoaca, Daniela Tarnita, Anca Petrisor, Ilie Diaconu, Dan Tarnita and Elvira Bizdoaca (2009). Biomimetic Approach to Design and Control Mechatronics Structure Using Smart Materials, Contemporary Robotics - Challenges and Solutions, A D Rodi (Ed.), ISBN: 978-953-307-038-4, InTech, Available from: http://www.intechopen.com/books/contemporary-robotics-challenges-and-solutions/biomimetic-approach-todesign-and-control-mechatronics-structure-using-smart-materials , Contemporary Robotics - Challenges and Solutions Edited by A D Rodi, 2009 (Tarnita, D., Tarnita, D. N., Bizdoaca, N., Popa D., Considerations on the dynamic simulation of the virtual model of the human knee joint, Materialwissenschaft und Werkstofftechnik, Materials Science and Engineering Technology, Special Edition Biomaterials, Willey-Vch., Matwer 40 (1-2) 1-120 (2009) ISSN 0933-5137, Vol.40, No.1-2-January 2009, pp73-81) 9. Stevanović, D., Korunović, N., Trajanović, M., Trifunović, M., Milovanović, J., Stojković, M., FINITE ELEMENT MODEL OF HUMAN TIBIA AND PRELIMINARY ANALYSIS, 11th INTERNATIONAL SCIENTIFIC CONFERENCE NOVI SAD, SERBIA, SEPTEMBER 20-21, 2012, pp.289-292 (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.) 10. Duta, Alina; Sass, Ludmila; Geonea, Ionut-Daniel, AN APPLIED METHOD TO SOLVE SOME TANGENT PROBLEMS, Journal of Industrial Design & Engineering Graphics . 2015 Special Issue, Vol. 10, p25-28. 4p. (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 11. Dalibor M. Đenadić, Miodrag T. Manić, Dejan I. Tanikić, Saša S. Ranđelović, Petar S. Đekić, ANALIZA I PRIKAZ VRSTA FIKSATORA U MEDICINI I METODA OBRADE MATERIJALA ZA IZRADU FIKSATORA, Vojnotehnički glasnik, 2013 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 12. Đenadić Dalibor M., Tanikić Dejan I., Manić Miodrag T., Ranđelović Saša S., Đekić Petar S., Analiza i prikaz vrsta fiksatora u medicini i metoda obrade materijala za izradu fiksatora, Vojnotehnički glasnik 2013, vol. 61, br. 2, str. 123-139, 2013 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 13. José Miguel Sánchez Márquez, Aportaciones experimentales al estudio de la corrección gradual de la escoliosis mediante la utilización de metales con memoria de forma, PhD Thesis, Facultad de Medicina Universidad Autónoma de Madrid, 2013 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 14. Stevanović, D., Korunović, N., Trajanović, M., Trifunović, M., Milovanović, J., Stojković, M., FINITE ELEMENT MODEL OF HUMAN TIBIA AND PRELIMINARY ANALYSIS, 11th INTERNATIONAL SCIENTIFIC CONFERENCE NOVI SAD, SERBIA, SEPTEMBER 20-21, 2012, pp. 289-292 (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.) 15. Иванов Д.В., Барабаш А.П., Барабаш Ю.А., ИНТРАМЕДУЛЛЯРНЫЙ СТЕРЖЕНЬ НОВОГО ТИПА ДЛЯ ОСТЕОСИНТЕЗА ДИАФИЗАРНЫХ ПЕРЕЛОМОВ БЕДРА, КиберЛенинка: https://cyberleninka.ru/article/n/intramedullyarnyy-sterzhen-novogo-tipa-dlya-osteosinteza-diafizarnyh-perelomov-bedra, 2015 (Buciu, G., Grecu, D., Niculescu, D., Chiutu, L., Stoica, M. and Popa, D., Studies about Virtual Behavior of Tibia Fractures and Nails During the Fixation. Journal of Industrial Design and Engineering Graphics, vol.8, issue no.2, pp. 5-10, 2013.)

24

16. Ivanov, D. V.; Barabash, A. P.; Barabash, Yu. A., NEW TYPE OF INTRAMEDULLARY NAIL FOR FEMUR DIAPHYSEAL FRACTURE OSTEOSYNTHESIS, Russian Journal of Biomechanics / Rossijski Zurnal Biomehaniki . 2015, Vol. 19 Issue 1, p45-56. 12p. (Buciu, G., Grecu, D., Niculescu, D., Chiutu, L., Stoica, M. and Popa, D., Studies about Virtual Behavior of Tibia Fractures and Nails During the Fixation. Journal of Industrial Design and Engineering Graphics, vol.8, issue no.2, pp. 5-10, 2013.) 17. Alin, Petcu; Dan, Calafetenu; Nicolae, Tarnita Danut, Numerical simulations and experimental flexion-extension measurements of human leg joints during squat exercises, Journal of Romanian Sports Medicine Society; Bucharest Vol. 13, Iss. 1, (2017): 2805-2811. (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 18. Alina DUTA, Ludmila SASS, Zorana JELI, Gabriel-Catalin MARINESCU, MODELLING AND SIMULATION MATTERS UPON THE STATIC ANALYSIS OF A BUILDING, MAY 2017, VOLUME 12, ISSUE 1,pp. 101-104, JIDEG, 2017 (Daniela Tarniţă, C. Boborelu, D. Popa, Corina Tarniţă, Ligia Rusu, The three-dimensional modeling of the complex virtual human elbow joint, in Romanian Journal of Morphology and Embriology, Ed. Academiei Romane, 2010 51(3):489-495, ISSN 1220-0522) 19. Ludmila SASS, Alina DUTA, Iulian POPESCU, NATURE GIVES US BEAUTY, INSPIRING THE TECHNICAL CREATIVITY, VOLUME 12 ISSUE 1, JIDEG, pp. 141-146, 2017 (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 20. Alin, Petcu; Dan, Calafetenu; Nicolae, Tarnita Danut, Numerical simulations and experimental flexion-extension measurements of human leg joints during squat exercises, Journal of Romanian Sports Medicine Society; Bucharest Vol. 13, Iss. 1, (2017): 2805-2811. (Daniela Tarniţă, D. N. Tarniţă, D. Popa, D. Grecu, Roxana Tarniţă, D. Niculescu, F. Cismaru, Numerical simulations of human tibia osteosynthesis using modular plates based on Nitinol staples, Romanian Journal of Morphology and Embryology 2010, 51(1):145–150) 21. Ludmila SASS, Alina DUTA, Iulian POPESCU, NATURE GIVES US BEAUTY, INSPIRING THE TECHNICAL CREATIVITY, VOLUME 12 ISSUE 1, JIDEG, pp. 141-146, 2017 (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.) 22. Alin, Petcu; Dan, Calafetenu; Nicolae, Tarnita Danut, Numerical simulations and experimental flexion-extension measurements of human leg joints during squat exercises, Journal of Romanian Sports Medicine Society; Bucharest Vol. 13, Iss. 1, (2017): 2805-2811. (Tarnită, D., Popa, D., Tarnită, D. N., Grecu, D.: CAD method for three-dimensional model of the tibia bone and study of stresses using the finite element method, Romanian Journal of Morphology and Embryology, Vol. 47 (2), p.p. 181-186, 2006.) 23. Alin, Petcu; Dan, Calafetenu; Nicolae, Tarnita Danut, Numerical simulations and experimental flexion-extension measurements of human leg joints during squat exercises, Journal of Romanian Sports Medicine Society; Bucharest Vol. 13, Iss. 1, (2017): 2805-2811. (D Tarnita, DN Tarnita, N Bizdoaca, D Popa, Contributions on the dynamic simulation of the virtual model of the human knee joint, Materialwissenschaft und Werkstofftechnik 40 (1‐2), 73-81, 2009) 24. Зуев Павел Павлович, Ямщиков Олег Николаевич, СОВРЕМЕННЫЕ ТЕНДЕНЦИИ РАЗВИТИЯ ИНТРАМЕДУЛЛЯРНОГО ОСТЕОСИНТЕЗА ДИАФИЗАРНЫХ ПЕРЕЛОМОВ БЕДРЕННОЙ КОСТИ, 2017, КиберЛенинка: https://cyberleninka.ru/article/n/sovremennye-tendentsii-razvitiya-intramedullyarnogo-osteosinteza-diafizarnyh-perelomov-bedrennoy-kosti (Buciu, G., Grecu, D., Niculescu, D., Chiutu, L., Stoica, M. and Popa, D., Studies about Virtual Behavior of Tibia Fractures and Nails During the Fixation. Journal of Industrial Design and Engineering Graphics, vol.8, issue no.2, pp. 5-10, 2013.) h3). Altele i) Membru în colectivele de redacti sau comitetele stiintifice al revistelor şi manifestarilor ştiinţifice, organizator/recenzor, Conferinte naţionale şi internaţionale neindexate

25

i1) nationale 1. in anul 2000 am facut parte din comitetul de organizare a celei de-a VII-a editii a Conferintei Nationale Grafica-2000 care a avut loc la Craiova cand au fost puse bazele infiintarii Societatii Inginerilor de Grafica Tehnica din Romania (Sorging); 2. organizator al Seminarului BIOMECANICA IMPLANTURILOR DENTARE in cadrul proiectului Leonardo, New Applications and Course Materials for Prosthetic Dentistry, Implant Dentistry and Biomedical Engineers,2012-1-TR1-LEO05-35166 - BIO-DENT, parteneri interni: Universitatea din Craiova, Universitatea de Medicina si Farmacie din Craiova, 2012-2014, Vineri, 11.07.2014, ora 10.00, Facultatea de Mecanică, Str. Calea București, Nr.107,Sala BA 201, Lectori: Conf.dr.ing.Dragoș POPA, Conf.dr.ing Alina DUȚĂ, Șef lucrări dr. Allma PITRU; 3. organizator al Seminarului BIOCOMPATIBILITATEA IMPLANTURILOR DENTARE in cadrul proiectului Leonardo, New Applications and Course Materials for Prosthetic Dentistry, Implant Dentistry and Biomedical Engineers,2012-1-TR1-LEO05-35166 - BIO-DENT, parteneri interni: Universitatea din Craiova, Universitatea de Medicina si Farmacie din Craiova, 2012-2014, Vineri, 18.07.2014, ora 10.00, Facultatea de Medicină Dentară, Str. Petru Rareș, Nr.5, Sala 311, Lectori: Șef lucrări dr. Allma PITRU, Conf.dr.ing.Dragoș POPA, Conf.dr.ing Alina DUȚĂ; 4. chairman la a IV Conferinta Nationala a Societatii Romane pentru Cercetare in Medicina Dentara, sala 311, orele 16-16.30, Universitatea de Medicina si Farmacie din Craiova, 21-22 septembrie 2018, Craiova, 2018 i2) internationale 1. (chairman) presedinte al sectiunii nr.9, Advanced Robotics and Simulation, RAAD’04, Brno, 2-5 iunie, 2004, Republica Ceha; 2. organizator 1st Workshop in Romania, Biodent project, 2-3 July 2013

3. recenzent (reviewer) pentru lucrarile 20 si 25, Proceedings of Eucomes 2014, New Trends in

Mechanism and Machine Science, 16-20 September, 2014, Guimarães, Portugal, IFTOMM,

Proceedings book by Springer [ISI];

4. recenzent (reviewer) pentru 3 lucrari SMAT 2014, Materials Sciences and Engineering, book by Scientific.net [ISI]: - Development of a Three-Dimensional Finite Element Knee Prosthesis Model - Ansys Simulation and Experiments of SERB New Romanian Seismic Dampers Used in Buildings Damping System - The Comparison Between BRB Dampers and Taylor Dampers Used in Damping System of High Buildings,Negru Mihai, Ionescu Adriana and Burada Cristian. 5. recenzent (reviewer) pentru 8 lucrari ICOME 2015, publicate in Materials Sciences and Engineering, book by Scientific.net [ISI]: - GEONEA Ionut, ROMANESCU Alina, RACILA Laurentiu, Experimental Analysis of a New Exoskeleton for People with Disabilities - Daniela Tarnita, Marius Georgescu, Dan Calafeteanu and Alina Romanescu, Experimental measurements of the human knee flexion angle during squat exercises - Oscar F. Avilés S., Mauricio F. Mauledoux M., Oscar G. Rubiano M., Hoffman F. Ramirez G., Max S. Dutra, FEA of Bioabsorbable Material to Repair Hand Fractures; - Crhistian C. Segura G, Juan C. Hernandez M., Oscar F Avilés S., Mauricio F. Mauledoux M. Max S. Dutra, Differential Model for a Six-Weeled robot (ACM1PT); - Ionescu Adriana, Burada Cristian and Negru Mihai, F.E.M. Simulation of the Building Frame Node Behavior During Seism; - CIUNEL Stefanita,TICA Bebe, TUTUNEA Dragos, Comparative Study of Cervical Classic Systems and Test Dummies Biofidelic of Road Accidents; - Vehicles’ Passive Safety Systems Influence On Driver’s Thorax Injuries OŢĂT Oana Victoria, DUMITRU Nicolae and OŢĂT Victor;

26

- Analysis of Shackles Plates Using the Finite Element Method for Railway Freight Car Bogies Fitted with Leaf Springs AXINTE Tiberiu and NUTU Catalin 6. membru in comitetul stiintific al The National Biomechanics Congress, internationally participated, held at Suleyman Demirel University on October 16 -18, 2014 under the leadership of the Biomechanics Research Group, Isparta, Turkey. j) Experienţă în management, analiză şi evaluare în cercetare şi/sau învăţamant (Conducere/membru) 1. 2012-2016 membru in Consiliul Calitatii al Universitatii din Craiova

k) Afilieri la organizaţii profesionale internaţionale/nationale recunoscute: k1) Afilieri la organizaţii profesionale internaţionale recunoscute: 1. membru al Society of Automotive Engineers (SAE International) 2. membru al Daaam International Vienna k2) Afilieri la organizaţii profesionale naţionale recunoscute: 1.vicepresedinte (din 2018) al Societatii stiintifice "Gogu Constantinescu", Craiova. 2. membru AGIR; 3. membru al Fundatiei "Profesorii fara frontiere"; 4. membru SIAR ; 5. membru al Societatii Romane de Robotica l). Premii:

1. Diploma de Excelenţă PROINVENT – 2014, Cluj Napoca Denumire invenţie: PROTEZĂ DE COT TIP CUPLĂ SFERICĂ CerereBrevet de inventie Nr. A00505 din 11 iulie 2013 Autori: Conf. univ.dr. Tarniţă Dănuţ Nicolae, Universitatea de Medicină şi Farmacie Craiova Prof. univ.dr. ing. Tarniţă Daniela, Universitatea din Craiova Dr. Boborelu Cristian, Spitalul Clinic de Urgenţă, Craiova Conf. univ.dr. ing. Popa Dragoş Laurenţiu, Universitatea din Craiova 2. Medalia de Aur PROINVENT – 2014, Cluj Napoca Denumire invenţie: PROTEZĂ DE COT TIP CUPLĂ SFERICĂ CerereBrevet de inventie Nr. A00505 din 11 iulie 2013 Autori: Conf. univ.dr. Tarniţă Dănuţ Nicolae, Universitatea de Medicină şi Farmacie Craiova Prof. univ.dr. ing. Tarniţă Daniela, Universitatea din Craiova Dr. Boborelu Cristian, Spitalul Clinic de Urgenţă, Craiova Conf. univ.dr. ing. Popa Dragoş Laurenţiu, Universitatea din Craiova

3. Premiul I acordat de Universitatea Politehnica Bucuresti Denumire invenţie: PROTEZĂ DE COT TIP CUPLĂ SFERICĂ CerereBrevet de inventie Nr. A00505 din 11 iulie 2013 Autori: Conf. univ.dr. Tarniţă Dănuţ Nicolae, Universitatea de Medicină şi Farmacie Craiova Prof. univ.dr. ing. Tarniţă Daniela, Universitatea din Craiova Dr. Boborelu Cristian, Spitalul Clinic de Urgenţă, Craiova Conf. univ.dr. ing. Popa Dragoş Laurenţiu, Universitatea din Craiova 4. Medalia de aur a Salonului International de Inventii, "International Intellectual Property, Invention, Innovation and Technology Exposition", 02-06 February, 2018, Bangkok International Trade & Exhibition Centre, Thailand

27

Denumire invenţie: PROTEZĂ DE COT TIP CUPLĂ SFERICĂ CerereBrevet de inventie Nr. A00505 din 11 iulie 2013 Autori: Conf. univ.dr. Tarniţă Dănuţ Nicolae, Universitatea de Medicină şi Farmacie Craiova Prof. univ.dr. ing. Tarniţă Daniela, Universitatea din Craiova Dr. Boborelu Cristian, Spitalul Clinic de Urgenţă, Craiova Conf. univ.dr. ing. Popa Dragoş Laurenţiu, Universitatea din Craiova 5. British Innovation Award – acordat de Association of British Inventors and Innovations, Marea Britanie, "International Intellectual Property, Invention, Innovation and Technology Exposition", 02-06 February, 2018, Bangkok International Trade & Exhibition Centre, Thailand;

Denumire invenţie: PROTEZĂ DE COT TIP CUPLĂ SFERICĂ CerereBrevet de inventie Nr. A00505 din 11 iulie 2013 Autori: Conf. univ.dr. Tarniţă Dănuţ Nicolae, Universitatea de Medicină şi Farmacie Craiova Prof. univ.dr. ing. Tarniţă Daniela, Universitatea din Craiova Dr. Boborelu Cristian, Spitalul Clinic de Urgenţă, Craiova Conf. univ.dr. ing. Popa Dragoş Laurenţiu, Universitatea din Craiova

6. Special Award and Gold Medal – acordate de Malaysian Research & Innovation Society, Malaezia, "International Intellectual Property, Invention, Innovation and Technology Exposition", 02-06 February, 2018, Bangkok International Trade & Exhibition Centre, Thailand

Denumire invenţie: PROTEZĂ DE COT TIP CUPLĂ SFERICĂ CerereBrevet de inventie Nr. A00505 din 11 iulie 2013 Autori: Conf. univ.dr. Tarniţă Dănuţ Nicolae, Universitatea de Medicină şi Farmacie Craiova Prof. univ.dr. ing. Tarniţă Daniela, Universitatea din Craiova Dr. Boborelu Cristian, Spitalul Clinic de Urgenţă, Craiova Conf. univ.dr. ing. Popa Dragoş Laurenţiu, Universitatea din Craiova 7. Diploma de excelenta acordata de Universitatea de Medicina si Farmacie Craiova pentru prezentarea conferintei: Metode si tehnici CAD si MEF utilizate pentru reconstructia si analiza virtuala a aparatului dento-maxilar, al X-lea Congres National Zilele Medicinei Dentare Craiovene cu tema: Implicatiile schimbarilor din viata sociala asupra practicii stomatologice, 7-9 iunie, Craiova, 2018;

8. Diploma de excelenta acordata de Societatea Romana pentru Cercetare in Medicina Dentara pentru prezentarea conferintei: Utilizarea unor metode ale prototiparii virtuale pentru reconstructia si analiza aparatului dento-maxilar, la a IV Conferinta Nationala a Societatii Romane pentru Cercetare in Medicina Dentara, 21-22 septembrie 2018, Craiova, 2018.

m) profesor invitat

- Vrije Universiteit Brussel, 18-21 iunie 2015, Program Erasmus. n) Lucrari prezentate in plenul unor conferinte n1) nationale 1. Veronica Mercuț, Popa Dragoș, Mihaela Vătu, Sanda Mihaela Popescu, Monica Scrieciu, Monica Mihaela Crăițoiu, Andreea Stănuși, Adina Chiriac, Implicațiile schimbărilor din viața socială asupra uzurii dentare, Facultatea de Medicina Dentara, UMF Craiova, al X-lea Congres National Zilele Medicinei Dentare Craiovene, sala 311, ora 9-9.30, 7.06.2018, Craiova, speaker Veronica Mercuț, 7-9 iunie, 2018; 2. Popa Dragoș-Laurențiu, Mercuț Veronica, Vătu Mihaela, Vintilă Daniela, Stănuși Andreea, Metode și tehnici CAD și MEF utilizate pentru reconstrucția și analiza virtuală a aparatului dento-maxilar, Facultatea de Medicina Dentara, UMF Craiova, al X-lea Congres National Zilele

28

Medicinei Dentare Craiovene, sala 310, ora 11.30-12.30, 8.06.2018, Craiova, speaker Popa Dragos-Laurentiu, 7-9 iunie, 2018; 3. Popa Dragoș-Laurențiu, Veronica Mercuț, Popescu Sanda Mihaela, Vătu Mihaela, Vintilă Daniela, Utilizarea unor metode ale prototipării virtuale pentru reconstrucția și analiza aparatului dento-maxilar, a IV Conferinta Nationala a Societatii Romane pentru Cercetare in Medicina Dentara, 21-22 septembrie 2018, Craiova, 2018, sala 311, ora 16-16.30, speaker Popa Dragos-Laurentiu, 21 septembrie, 2018. Data: 11.10.2018 Semnătura, conf.dr. ing. Popa Dragos-Laurentiu