+ All Categories
Home > Documents > Catalog Popa Prezentare Generala

Catalog Popa Prezentare Generala

Date post: 16-Oct-2015
Category:
Upload: stuparu-victor
View: 101 times
Download: 1 times
Share this document with a friend
Description:
Tools for wood industrie

of 80

Transcript
  • Centru prelucrare scule de nalt precizie pentru toate materialele

    1Certificat Nr. 2491

    www.popatools.ro

  • www.popatools.ro

    POPA S.R.L. POPA S.R.L.CENTRU PRELUCRARE SCULE

    DE NALT PRECIZIE PENTRU TOATE MATERIALELE

    Str. Horia nr. 4

    Codlea - Romnia

    Tel. : +40 (0) 268 251 820, +40 (0) 268 251 341

    Fax: +40 (0) 268 475 836

    E-mail: [email protected]

    www.popatools.ro

  • Capitolul I

    1.1. Cap rindeluit ...............................................................................................................11.2. Cap de frezat pentru cutite profilate .............................................................................................21.3. Cap de frezat tip hobby ...............................................................................................................21.4. Cap de frezat cep oval ...............................................................................................................3

    1.4.1. Cap de frezat cep oval cu cutite .........................................................................31.4.2. Cap de frezat cep oval cu placute amovibile ......................................................3

    1.5. Cap de frezat pentru bete rotunde striate.....................................................................................41.6. Dispozitiv batant cu panza oscilanta.............................................................................................4

    Capitolul II

    2.1. Freza pentru uluc ...............................................................................................................52.1.1. Freza pentru uluc cu placute brazate ................................................................52.1.2 Freza pentru uluc reglabil cu placute brazate.....................................................62.1.3 Freza pentru uluc reglabil cu placute amovibile .................................................72.1.4 Freza pentru cepuit reglabil ................................................................................7

    2.2 Freza pentru cant ...............................................................................................................82.2.1 Freza pentru cant cu placute brazate .................................................................82.2.2 Freza pentru cant cu placute amovibile..............................................................92.2.3 Freza pentru cant tip melc cu placute brazate....................................................102.2.4 Freza pentru cant tip melc cu placute amovibile ................................................10

    2.3. Freza pentru falt ...............................................................................................................112.3.1. Freza pentru falt cu placute brazate ...................................................................112.3.2. Freza pentru falt cu placute amovibile................................................................12

    2.4 Freza profilata cerc concav si convex ..........................................................................................132.5 Freza unghiulara ...............................................................................................................152.6 Freza scos pungi rasina ..............................................................................................................16

    2.6.1 Freza scos pongi rasina cu placute brazate .......................................................162.6.2 Freza scos pongi rasina cu placute amovibile....................................................16

    2.7. Set freze executat barcute............................................................................................................172.7.1 Set freze executat barcute cu placute brazate ...................................................172.7.2 Set freze executat barcute cu placute amovibile ................................................17

    2.8 Freza pentru imbinari ...............................................................................................................182.8.1 Freza pentru imbinari pe lungime ......................................................................182.8.2 Freza pentru imbinari in dinti pe lungime............................................................192.8.3 Freza pentru imbinari in dinti pe lungime............................................................192.8.4 Freza pentru imbinari in dinti pe lungime ...........................................................202.8.5 Freza pentru imbinari in dinti pe lungime cu placute amovibile ..........................202.8.6 Freza pentru imbinari in dinti pe latime ..............................................................212.8.7 Freza pentru imbinari in dinti pe latime cu placute amovibile .............................23

    2.9 Set freze pentru geamuri si usi.....................................................................................................242.10 Freza pentru ablatuit ...............................................................................................................262.11 Set freze pentru imbinari lamba - uluc..........................................................................................28

    Capitolul III

    3.1 Freza profilata cu placute brazate ................................................................................................303.2 Freza profilata cu placute amovibile .............................................................................................323.3 Freza profilata tip melc cu placute brazate...................................................................................323.4 Freza profilata tip melc cu placute amovibile................................................................................323.5 Set freze profilate pentru geam termopan ....................................................................................33

    Capitolul IV

    4.1 Freza cilindrica cu coada cu z=1 ..................................................................................................354.2 Freza cilindrica cu coada fileteta m10 z=2 pentru imbinari drepte ..............................................364.3 Freza cilindrica cu coada fileteta m10 z=2 pentru imbinari coada de randunica..........................364.4 Freza cilindrica cu coada cu z=2 pentru frezat canale .................................................................374.5 Freza cilindrica cu coada pentru scobit cu 2 canale.....................................................................374.6 Freza cilindrica cu coada pentru scobit cu 4 canale.....................................................................384.7 Freza cilindrica cu coada pentru scobit cu 2 canale si sfaramatori de aschie..............................384.8 Freza cu coada cilindrica pentru sculptura z=1 ............................................................................394.9 Freza cu coada cilindrica pentru sculptura z=2 ............................................................................394.10 Freza cu coada cilindrica pentru indreptat z=2.............................................................................404.11 Freza cu coada cilindrica pentru indreptat z=2 cu rulment ...........................................................404.12 Freza cu coada cilindrica pentru indreptat z=2+1.........................................................................41

    CUPRINS

    CUPR

    INS

  • 4.13 Freza cu coada cilindrica pentru indreptat cu placute amovibile ..................................................414.14 Freza cu coada cilindrica pentru indreptat cu placute amovibile si rulment .................................424.15 Freza cu coada CM2 pentru indreptat ..........................................................................................424.16 Freza cu coada CM2 pentru indreptat cu placute cu placute amovibile .......................................434.17 Freza cu coada CM2 unghiulara ..................................................................................................434.18 Freza cu coada CM2 cu profil concav cerc ..............................................................................444.19 Freza cu coada pentru cepuri rotunde..........................................................................................444.20 Freza cu coada cilindrica pentru indreptat tip melc ......................................................................454.21 Freza cu coada cilindrica pentru indreptat tip melc cu placute amovibile.....................................454.22 Freza cu coada CM2 pentru indreptat tip melc............................................................................464.23 Freza cu coada CM2 pentru indreptat tip melc cu placute amovibile ...........................................46

    Capitolul V

    5.1 Freza cu coada profilata ...............................................................................................................475.1.1 Freza cu coada profilata cu placute brazate..........................................475.1.2 Freza cu coada profilata cu placute amovibile.......................................47

    5.2 Freza elicoidala cu coada integral din carbura metalica sau din otel rapid ..................................485.2.1 Freza elicoitala cu coada z=1 ................................................................485.2.2 Freza elicoitala cu coada z=2 ................................................................495.2.3 Freza elicoitala cu coada z=3 ................................................................505.2.4 Freza elicoidala cu coada cu dubla comprese z=2+2............................505.2.5 Freza elicoidala cu coada z=3 cu sfaramatori de aschie.......................51

    5.3 Freza cu coada diamantata ..........................................................................................................525.3.1. Freza cu coada diamantata ................................................................................525.3.2 Freza cu coada diamantata elicoidala ................................................................52

    Capitolul VI

    6.1 Burghiu elicoidal cu coada filetata ................................................................................................536.2 Burghiu elicoidal cu coada cilindrica aplatizata ............................................................................546.3 Burghiu elicoidal cu coada cilindrica pentru mandrina .................................................................556.4 Burghiu elicoidal in trepte .............................................................................................................566.5 Burghiu de precizie pentru gauri mari ..........................................................................................576.6 Burghiu pentru scos noduri .........................................................................................................586.7 Burghiu pentru executat dopuri ....................................................................................................59

    Capitolul VII

    7.1. Zencuitor - 90- ...............................................................................................................607.2 Zencuitor - 90- ...............................................................................................................60

    7.2.1 Zencuitor amovibil - 90- monobloc ....................................................................607.2.2 Zencuitor amovibil - 90- placat CMS .................................................................61

    7.3 Zencuitor 180- ...............................................................................................................617.4 Mandrina cu coada CM2 .............................................................................................................627.5 Mandrina cu coada filetata............................................................................................................63

    Capitolul VIII

    8.1. Cutite pentru cap de rindeluit ....................................................................................................648.2 Cutite pentru cap de rindeluit ....................................................................................................648.3 Cutite pentru cap de frezat .......................................................................................................658.4 Cutite pentru cap de frezat hobby .............................................................................................658.5 Cutite tangentiale pentru degrosat ...............................................................................................678.6 Cutite tangentiale pentru finisat ....................................................................................................678.7 Cutite pentru bete rotunde............................................................................................................688.8 Cutite pentru bete rotunde striate .................................................................................................68

    Capitolul IX

    Placute amovibile CMS ............................................................................................................... 69

    Capitolul X

    10.1 Inele distantiere ...............................................................................................................7110.2 Reductii ...............................................................................................................7110.3 Reductii ...............................................................................................................7110.4 Bucsi elastice ...............................................................................................................7210.5 Piulite ...............................................................................................................73

    CUPR

    INS

  • La comand se execut i alte dimensiuni, se pot executa i din duraluminiu.Auf Bestellung werden auch andere Dimensionen ausgefhrt, sie knnen auch aus Dural erzeugt werden.At order we are able to produce others dimensions, we are able to produce with ligh alloy-body.

    I. CA

    PETE

    / H

    OB

    ELK

    OPF

    / H

    EAD

    S

    1.1. Cap rindeluit / Hobelkopf / Planing Head

    Cod grup / Gruppenkode / Groupe Code CR 01

    Operaia: rindeluireMain: de rindeluit i profilat pe 4 fee Material: lemn masiv

    Verfahren: HobelnMaschine: und Profiliermaschine fr 4 FlchenMaterial: Massives Holz

    Application: for planingwork in solid wood

    60 80 100 120 130 150 170 180 190 210 230 240 60 80 100 120 130 150 170 180 210 230 260

    CR01 120.60CR01 120.80CR01 120.100CR01 120.120CR01 120.130CR01 120.150CR01 120.170CR01 120.180CR01 120.190CR01 120.210CR01 120.230CR01 120.240CR01 140.60CR01 140.80CR01 140.100CR01 140.120CR01 140.130CR01 140.150CR01 140.170CR01 140.180CR01 140.210CR01 140.230CR01 140.260

    40 40404040404040404040405050505050505050505050

    D B d Cod scule120 120 120 120 120 120 120 120 120 120 120 120 140140140140140140140140140140140

    I. Capete de rindeluit i frezat / Hobelkopf / Planing Heads

    1

  • I. CA

    PETE

    / H

    OB

    ELK

    OPF

    / H

    EAD

    S

    2

    1.2. Cap de frezat pentru cuite profilate / Frskopf fr profilierte Messer / Profile Cutter Head

    Cod grup / Gruppenkode / Groupe Code CF 01

    Verfahren: Frsen von ProfileMaschine: MNF, MRPMaterial: Massives Holz, hart und weich

    Operaia: frezat profileMain: MNF, MRPMaterial: lemn masiv tare i moale

    Application: cutting and profiling work in longitudinal direction on multi-spindle machines

    4060 80 100 130 150 180 60 80 100 130 150 180

    CF01 122.40CF01 122.60CF01 122.80CF01 122.100CF01 122.130CF01 122.150CF01 122.180CF01 137.60CF01 137.80CF01 137.100CF01 137.130CF01 137.150CF01 137.180

    30 sau 40 30 sau 4030 sau 4030 sau 4030 sau 4030 sau 4030 sau 40

    505050505050

    D B d COD SCULE122122122122122122122137137137137137137

    I. Capete de rindeluit i frezat / Hobelkopf / Planing Heads

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    1.3. Cap de frezat tip Hobby / Frskopf Hobby / Universal profil cutter head type Hobby

    Cod grup / Gruppenkode / Groupe Code CF 02

    Operaia: frezat profileMain: MNF,MRPMaterial: lemn masiv tare i moale

    Verfahren: Frsen von ProfilenMaschine: MNF,MRPMaterial: Massives Holz, hart und weich

    B d COD SCULE9696

    D40 30 / 40 CF 0296.4050 30 / 40 CF 0296.50

    I. Capete de rindeluit i frezat / Hobelkopf / Planing Heads

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    Application: cutting and profiling work in longitudinal direction on multi-spindle machines

  • I. CA

    PETE

    / H

    OB

    ELK

    OPF

    / H

    EAD

    S

    3

    Verfahren: Frsen von ZapfenMaschine: MNFMaterial: Massives Holz

    1.4. Cap de frezat cep oval / Frskopf fr ovale Zapfen / Cutter for tenoning machines

    Cod grup / Gruppenkode / Groupe Code CF 03

    Operaia: frezat cepuriMain: MNFMaterial: lemn masiv tare i moale

    1.4.1. Cap de frezat cep oval cu cuite / Frskopf fr ovale Zapfen / Cutter for tenoning machines

    Application: used to execute woodere pins

    B d COD SCULE80D

    90 30 CF 03 80.90

    I. Capete de rindeluit i frezat / Hobelkopf / Planing Heads

    1.4. Cap de frezat cep oval / Frskopf fr ovale Zapfen / Cutter for tenoning machines

    Verfahren: Frsen von ZapfenMaschine: MNFMaterial: Massives Holz

    Cod grup / Gruppenkode / Groupe Code CF 03A

    Operaia: frezat cepuriMain: MNFMaterial: lemn masiv tare i moale

    1.4.2. Cap de frezat cep oval cu plcue amovibile / Frskopf fr ovale Zapfen / Set of cutterheads for tenoning machines

    Application: used to execute woodere pins

    B d COD SCULE130D

    90 30 CF 03A 130.9090D1

    I. Capete de rindeluit i frezat / Hobelkopf / Planing Heads

  • I. CA

    PETE

    / H

    OB

    ELK

    OPF

    / H

    EAD

    S

    4

    1.5. Cap de frezat pentru bee rotunde striate / Frskopf fr runde geriffelte Stbe / Multi-dowel Cutter HeadCod grup / Gruppenkode / Groupe code CF 04Operaia: frezat bee rotunde striateMain: MRPMaterial: lemn masiv

    Verfahren: Frsen von runden Geriffelten StbMaschine: MRPMaterial: Massives Holz

    I. Capete / Hobelkopf / Heads

    Application: production of serrated dowels of 6,1 to16,1 mmMachine: multi-spindle mouldersMaterials: solid wood

    B d COD SCULE135D

    75 40 CF 04 135.75

    Bmax

    T

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen.At order we are able to produce others dimensions.

    1.6. Dispozitiv batant cu pnz oscilant / / Adjustable wobble sawVerstellnuter

    Cod grup / Gruppenkode / Groupe code CF 06

    d Bmax COD SCULE200250300

    D303030

    283441

    CF 06 200.28CF 06 250.34CF 06 300.41

    T457095

    I. Capete de rindeluit i frezat / Hobelkopf / Planing Heads

    Anwendurng: fr extrem harte hlzer, sperrholz,span und tischler platten.

    Application: for extremely hard solid wood, plywood and particle boards.

    Operaia: frezat Main: MNFMaterial: lemn masiv tare i moale

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen.At order we are able to produce others dimensions.

  • II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    Verfahren: Frsen mit NutMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.1. Freza pentru uluc / Frsen mit Nut / Groving cutters

    Cod grup / Gruppekode / Groupe Code FU00 FU01 -> Z=4 FU02 -> Z=6 FU03 -> Z=10 FU04 -> Z=8FU05 -> Z=6 (2+4)FU06 -> Z=8 (4+4)

    Operaia: frezare ulucMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Application: used for the execution of grooves on toupil machines, on solid wood, laminated and such.

    2.1.1. Freza pentru uluc cu pl / Frsen mit Nut /

    cue brazateGroving cutters

    100 4 30 FU 00 OR 100.4 FU 00 CM 100.4100 5 30 FU 00 OR 100.5 FU 00 CM 100.5100 6 30 FU 00 OR 100.6 FU 00 CM 100.6100 8 30 FU 00 OR 100.8 FU 00 CM 100.8100 10 30 FU 00 OR 100.10 FU 00 CM 100.10100 12 30 FU 00 OR 100.12 FU 00 CM 100.12100 14 30 FU 00 OR 100.14 FU 00 CM 100.14100 16 30 FU 00 OR 100.16 FU 00 CM 100.16100 18 30 FU 00 OR 100.18 FU 00 CM 100.18100 20 30 FU 00 OR 100.20 FU 00 CM 100.20125 4 30 FU 00 OR 125.4 FU 00 CM 125.4125 5 30 FU 00 OR 125.5 FU 00 CM 125.5125 6 30 FU 00 OR 125.6 FU 00 CM 125.6125 8 30 FU 00 OR 125.8 FU 00 CM 125.8125 10 30 FU 00 OR 125.10 FU 00 CM 125.10125 12 30 FU 00 OR 125.12 FU 00 CM 125.12125 14 30 FU 00 OR 125.14 FU 00 CM 125.14125 16 30 FU 00 OR 125.16 FU 00 CM 125.16125 18 30 FU 00 OR 125.18 FU 00 CM 125.18125 20 30 FU 00 OR 125.20 FU 00 CM 125.20140 4 30 FU 00 OR 140.4 FU 00 CM 140.4140 5 30 FU 00 OR 140.5 FU 00 CM 140.5140 6 30 FU 00 OR 140.6 FU 00 CM 140.6140 8 30 FU 00 OR 140.8 FU 00 CM 140.8140 10 30 FU 00 OR 140.10 FU 00 CM 140.10140 12 30 FU 00 OR 140.12 FU 00 CM 140.1140 14 30 FU 00 OR 140.14 FU 00 CM 140.14140 16 30 FU 00 OR 140.16 FU 00 CM 140.16140 18 30 FU 00 OR 140.18 FU 00 CM 140.18140 20 30 FU 00 OR 140.20 FU 00 CM 140.20160 4 30 FU 00 OR 160.4 FU 00 CM 160.4160 5 30 FU 00 OR 160.5 FU 00 CM 160.5160 6 30 FU 00 OR 160.6 FU 00 CM 160.6160 8 30 FU 00 OR 160.8 FU 00 CM 160.8160 10 30 FU 00 OR 160.10 FU 00 CM 160.10160 12 30 FU 00 OR 160.12 FU 00 CM 160.12160 14 30 FU 00 OR 160.14 FU 00 CM 160.14160 16 30 FU 00 OR 160.16 FU 00 CM 160.16160 18 30 FU 00 OR 160.18 FU 00 CM 160.18160 20 30 FU 00 OR 160.20 FU 00 CM 160.20

    D B dCod Scule

    OR / HSS CMS / HM

    5

  • 62.1.1. Freza pentru uluc cu pl / Frsen mit Nut /

    cue brazateGroving cutters

    D B dCod Scule

    OR / HSS CMS / HM180 4 30 FU 00 OR 180.4 FU 00 CM 180.4180 5 30 FU 00 OR 180.5 FU 00 CM 180.5180 6 30 FU 00 OR 180.6 FU 00 CM 180.6180 8 30 FU 00 OR 180.8 FU 00 CM 180.8180 10 30 FU 00 OR 180.10 FU 00 CM 180.10180 12 30 FU 00 OR 180.12 FU 00 CM 180.12180 14 30 FU 00 OR 180.14 FU 00 CM 180.14180 16 30 FU 00 OR 180.16 FU 00 CM 180.16180 18 30 FU 00 OR 180.18 FU 00 CM 180.18180 20 30 FU 00 OR 180.20 FU 00 CM 180.20200 8 30 FU 00 OR 200.8 FU 00 CM 200.8200 10 30 FU 00 OR 200.10 FU 00 CM 200.10200 12 30 FU 00 OR 200.12 FU 00 CM 200.12200 14 30 FU 00 OR 200.14 FU 00 CM 200.14200 16 30 FU 00 OR 200.16 FU 00 CM 200.16200 18 30 FU 00 OR 200.18 FU 00 CM 200.18200 20 30 FU 00 OR 200.20 FU 00 CM 200.20

    continuare

    2.1. Freza pentru uluc / Frsen mit Nut / Groving cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    2.1.2. Freze pentru uluc reglabil cu plcue brazate / Verstellbare Frsen mit Bohrung / Groving cutters with spens adjustable by means of spacing collars

    Cod grup / Gruppenkode / Groupe Code FU 07Operaia: frezare ulucMain: MNFMaterial: lemn masiv, panouri furniruite

    Verfahren: Frsen mit BohrungMaschine: MNFMaterial: Frsen mit Bohrung

    Application: used for the execution of grooves of different thickness using spacers

    2.1. Freza pentru uluc / Frsen mit Nut / Groving cutters

    La comanda se pot executa si alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    D B dCod Scule

    OR / HSS CMS / HM150 3,8 7,5 FU07OR150.3,8/7,5 FU07CM150.3,8/7,5150 5 - 9 30 / 40 FU07OR150.5/9 FU07CM150.5/9150 8 - 15 FU07OR150.8/15 FU07CM150.8/15180 6 - 11 FU07OR180.6/11 FU07CM180.6/11180 8 - 15 30 / 40 FU07OR180.8/15 FU07CM180.8/15200 6 - 11 FU07OR200.6/11 FU07CM200.6/11200 8 - 15 30 / 40 FU07OR200.8/15 FU07CM200.8/15250 8 - 15 FU07OR250.8/15 FU07CM250.8/15250 12 - 23 30 / 40 FU07OR250.12/23 FU07CM250.12/23

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

  • 7Application: for grooving in natural timber soft or hard. For basic mortise and tenon joints as well

    Cod grup / Gruppenkode / Groupe Code FU08

    2.1. Freza pentru uluc / Frsen mit Nut / Groving cutters2.1.4. Freze pentru cepuit reglabil / Verstellbare Frsen fr Zapfenherstellung / Groving cutterhead adjustable with spac

    Operaia: frezat cepuitMain: MNFMaterial: lemn masiv, panouri furniruite

    Verfahren: Frsen fr ZapfenherstellungMaschine: MNFMaterial: Massives Holz, furnierte Platten

    D B d Cod SculeZ150 9,6 - 19 30 / 40 4+4 FU07A150.9,6/19180 9,6 - 19 4+4 FU07A180.9,6/19180 12 - 23 30 / 40 4+4 FU07A180.12/23200 9,6 - 19 4+4 FU07A200.9,6/19200 12 - 23 30 / 40 4+4 FU07A200.12/23200 14 - 27 4+4 FU07A200.14/27250 12 - 23 4+4 FU07A250.12/23250 14 - 27 30 / 40 4+4 FU07A250.14/27

    2.1. Freza pentru uluc / Frsen mit Nut / Groving cutters2.1.3. Freza pentru uluc reglabil cu plcute amovibile / Nutmesserkopfsatz mit zwischenringen verstellbar / Adjustable grooving cutterheads

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Verfahren: Frsen mit NutMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    Cod grup / Gruppekode / Groupe Code FU07AOperaia: frezare ulucMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Application: used for the execution of adjustable grooves using spacer rings

    D B d Cod SculeZ150 9,6 - 19 30 / 40 4+4 FU07A150.9,6/19180 9,6 - 19 4+4 FU07A180.9,6/19180 12 - 23 30 / 40 4+4 FU07A180.12/23200 9,6 - 19 4+4 FU07A200.9,6/19200 12 - 23 30 / 40 4+4 FU07A200.12/23200 14 - 27 4+4 FU07A200.14/27250 12 - 23 4+4 FU07A250.12/23250 14 - 27 30 / 40 4+4 FU07A250.14/27

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

  • 82.2. Freza pentru cant / Frsen fr Kanten / Jointing cutters

    Cod grup / Gruppenkode / Groupe code FC01Operaia: frezat cantMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: Frsen von KantenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    D B dCod Scule

    OR / HSS CMS / HM63 25 25 FC01 OR 63.25 FC01 CM 63.2563 28 25 FC01 OR 63.28 FC01 CM 63.2863 30 25 FC01 OR 63.30 FC01 CM 63.3063 35 25 FC01 OR 63.35 FC01 CM 63.3563 40 25 FC01 OR 63.40 FC01 CM 63.4063 45 25 FC01 OR 63.45 FC01 CM 63.4563 60 25 FC01 OR 63.60 FC01 CM 63.6080 25 30 FC01 OR 80.25 FC01 CM 80.2580 28 30 FC01 OR 80.28 FC01 CM 80.2880 32 30 FC01 OR 80.32 FC01 CM 80.3280 40 30 FC01 OR 80.40 FC01 CM 80.4080 45 30 FC01 OR 80.45 FC01 CM 80.4580 50 30 FC01 OR 80.50 FC01 CM 80.5080 63 30 FC01 OR 80.63 FC01 CM 80.6380 80 30 FC01 OR 80.80 FC01 CM 80.80100 25 30 FC01 OR 100.25 FC01 CM 100.25100 28 30 FC01 OR 100.28 FC01 CM 100.28100 32 30 FC01 OR 100.32 FC01 CM 100.32100 40 30 FC01 OR 100.40 FC01 CM 100.40100 45 30 FC01 OR 100.45 FC01 CM 100.45100 50 30 FC01 OR 100.50 FC01 CM 100.50100 63 30 FC01 OR 100.63 FC01 CM 100.63100 80 30 FC01 OR 100.80 FC01 CM 100.80

    Application: indicated to work solid wood, laminated and such.

    2.2.1. Freza pentru cant cu plcue brazate / Frsen fr Kanten / Jointing cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

  • 92.2. Freza pentru cant / Frsen fr Kanten / Jointing cutters

    Cod grup / Gruppenkode / Groupe code FC01AOperaia: frezat cantMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: Frsen von KantenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    2.2.2. Freza pentru cant cu plcue amovibile / Frsen fr Kanten / Jointing cutterheads with turnover knives

    Application: indicated to edge solid wood, chipboard or MDF.

    D B d Cod SculeZ80 20 30 4 FC01A80.2080 25 30 4 FC01A80.2580 30 30 4 FC01A80.3080 40 30 4 FC01A80.4080 50 30 4 FC01A80.5080 60 30 4 FC01A80.60100 20 30 / 40 4 FC01A100.20100 25 30 / 40 4 FC01A100.25100 30 30 / 40 4 FC01A100.30100 40 30 / 40 4 FC01A100.40100 50 30 / 40 4 FC01A100.50100 60 30 / 40 4 FC01A100.60100 80 30 / 40 4 FC01A100.80125 20 30 / 40 4 FC01A125.20125 25 30 / 40 4 FC01A125.25125 30 30 / 40 4 FC01A125.30125 40 30 / 40 4 FC01A125.40125 50 30 / 40 4 FC01A125.50125 60 30 / 40 4 FC01A125.60125 80 30 / 40 4 FC01A125.80

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

  • 10

    2.2.3. Freza pentru cant tip melc cu plcue brazate / Frsen fr Kanten Typ Schecke / Multiteeth jointing cuttersCod grup / Gruppenkode / Groupe code FC 02Operaia: frezat cantMain: MNF,MRPMaterial: lemn masiv moale i tare

    Verfahren: Frsen von KanteMaschine: MNF, MRPMaterial: Massives Holz, weich und hart

    2.2. Freza pentru cant / Frsen fr Kanten / Jointing cutters

    Application: indicated for trimming curved elements, when an excellent chip removal is requested.

    D B d Z

    80 40 30 8 FC02OR80.40 FC02CM80.4080 50 30 8 FC02OR80.50 FC02 CM80.5080 60 30 8 FC02OR80.60 FC02 CM80.6080 80 30 8 FC02OR80.80 FC02 CM80.80100 40 30 / 40 10 FC02OR100.40 FC02CM100.40100 50 30 / 40 10 FC02OR100.50 FC02CM100.50100 60 30 / 40 10 FC02OR100.60 FC02CM100.60100 80 30 / 40 10 FC02OR100.80 FC02CM100.80100 100 30 / 40 10 FC02OR100.100 FC02CM100.100125 60 30 / 40 12 FC02OR125.60 FC02CM125.60125 80 30 / 40 12 FC02OR125.80 FC02CM125.80125 100 30 / 40 12 FC02OR125.100 FC02CM125.100125 120 30 / 40 12 FC02OR125.120 FC02CM125.120125 130 30 / 40 12 FC02OR125.130 FC02CM125.130125 150 30 / 40 12 FC02OR125.150 FC02CM125.150125 180 30 / 40 12 FC02OR125.180 FC02CM125.180125 230 30 / 40 12 FC02OR125.230 FC02CM125.230

    Cod SculeOR / HSS CMS / HM

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    2.2.4. Freza pentru cant tip melc cu plcue amovibile / Frsen fr Kanten Typ Schecke / Multiteeth jointing cutterheads

    cod grup / Gruppenkode / Groupe code FC 02A

    2.2. Freza pentru cant / Frsen fr Kanten / Jointing cutters

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    D B d Cod Scule100 106.5 40 FC02A 100.106.5100 124.5 40 FC02A 100.124.5100 144.5 40 FC02A 100.144.5100 164.5 40 FC02A 100.164.5100 184.5 40 FC02A 100.184.5100 204.5 40 FC02A 100.204.5125 106.5 40 FC02A 125.106.5125 124.5 40 FC02A 125.124.5125 144.5 40 FC02A 125.144.5125 164.5 40 FC02A 125.164.5125 184.5 40 FC02A 125.184.5125 204.5 40 FC02A 125.204.5125 224.5 40 FC02A 125.224.5

  • 11

    Cod grup / Gruppenkode / Groupe Code FF01Operaia: frezat falMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: FalzfrsenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    D B dCod Scule

    OR / HSS CMS / HM100 16 30 FF01 OR 100.16 FF01 CM 100.16100 20 30 FF01 OR 100.20 FF01 CM 100.20100 25 30 FF01 OR 100.25 FF01 CM 100.25100 32 30 FF01 OR 100.32 FF01 CM 100.32125 16 30 FF01 OR 125.16 FF01 CM 125.16125 20 30 FF01 OR 125.20 FF01 CM 125.20125 25 30 FF01 OR 125.25 FF01 CM 125.25125 32 30 FF01 OR 125.32 FF01 CM 125.32125 40 30 FF01 OR 125.40 FF01 CM 125.40125 50 30 FF01 OR 125.50 FF01 CM 125.50140 16 30 FF01 OR 140.16 FF01 CM 140.16140 20 30 FF01 OR 140.20 FF01 CM 140.20140 25 30 FF01 OR 140.25 FF01 CM 140.25140 32 30 FF01 OR 140.32 FF01 CM 140.32140 40 30 FF01 OR 140.40 FF01 CM 140.40140 50 30 FF01 OR 140.50 FF01 CM 140.50160 20 30 FF01 OR 160.20 FF01 CM 160.20160 25 30 FF01 OR 160.25 FF01 CM 160.25160 32 30 FF01 OR 160.32 FF01 CM 160.32160 40 30 FF01 OR 160.40 FF01 CM 160.40160 50 30 FF01 OR 160.50 FF01 CM 160.50180 20 30 FF01 OR 180.20 FF01 CM 180.20180 25 30 FF01 OR 180.25 FF01 CM 180.25180 32 30 FF01 OR 180.32 FF01 CM 180.32180 40 30 FF01 OR 180.40 FF01 CM 180.40200 20 30 FF01 OR 200.20 FF01 CM 200.20200 25 30 FF01 OR 200.25 FF01 CM 200.25200 32 30 FF01 OR 200.32 FF01 CM 200.32200 40 30 FF01 OR 200.40 FF01 CM 200.40

    2.3.1. Freza pentru fal cu plcue brazate / Falzfrsen / Jointing cutters

    Application: indicated to work solid wood, laminated and such.

    2.3. Freza pentru fal / Falzfrsen / Jointing cutters

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

  • 12

    2.3. Freza pentru fal / Falzfrsen / Jointing cutters

    Cod grup / Gruppenkode / Groupe Code FF01AOperaia: frezat falMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: FalzfrsenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    2.3.2. Freza pentru fal cu plcue amovibile / Falzfrsen / Jointing cutters cutterheads with turnover knive

    Application: indicated to edge solid wood, chipboard or mdf panels, acording to the quality of the mounted knives.

    D B d Cod SculeZ100 20 30 4 + 4 FF01A100.20100 25 30 4 + 4 FF01A100.25100 30 30 4 + 4 FF01A100.30100 40 30 4 + 4 FF01A100.40100 50 30 4 + 4 FF01A100.50125 20 30 / 40 4 + 4 FF01A125.20125 25 30 / 40 4 + 4 FF01A125.25125 30 30 / 40 4 + 4 FF01A125.30125 40 30 / 40 4 + 4 FF01A125.40125 50 30 / 40 4 + 4 FF01A125.50125 60 30 / 40 4 + 4 FF01A125.60140 20 30 / 40 4 + 4 FF01A140.20140 25 30 / 40 4 + 4 FF01A140.25140 30 30 / 40 4 + 4 FF01A140.30140 40 30 / 40 4 + 4 FF01A140.40140 50 30 / 40 4 + 4 FF01A140.50140 60 30 / 40 4 + 4 FF01A140.60160 20 30 / 40 4 + 4 FF01A160.20160 25 30 / 40 4 + 4 FF01A160.25160 30 30 / 40 4 + 4 FF01A160.30160 40 30 / 40 4 + 4 FF01A160.40160 50 30 / 40 4 + 4 FF01A160.50160 60 30 / 40 4 + 4 FF01A160.60180 20 30 / 40 4 + 4 FF01A180.20180 25 30 / 40 4 + 4 FF01A180.25180 30 30 / 40 4 + 4 FF01A180.30180 40 30 / 40 4 + 4 FF01A180.40180 50 30 / 40 4 + 4 FF01A180.50180 60 30 / 40 4 + 4 FF01A180.60200 20 30 / 40 4 + 4 FF01A200.20200 25 30 / 40 4 + 4 FF01A200.25200 30 30 / 40 4 + 4 FF01A200.30200 40 30 / 40 4 + 4 FF01A200.40200 50 30 / 40 4 + 4 FF01A200.50200 60 30 / 40 4 + 4 FF01A200.60

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

  • 13

    2.4. Freza profilate cerc concav si convex / Profilierte Frsen konkave und konvexe Kreise / Simple profile cutters half-round, quarter-round conves radius, corner round cutters

    Cod grup / Gruppenkode / Groupe Code FP00FP01 cerc concav / Kreis konkav / Concave Circle FP02 cerc convex / Kreis konvex / Convex Circle FP03 cerc concav / Kreis konkav / Concave Circle FP04 cerc convex / Kreis konvex / Convex Circle

    Verfahren: Profilfrsen fr Kanten Maschine: MNF, MRP Material: Massives Holz furnierte Platten

    Operaia: frezare profil cantMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Application : used for the execution of profiles on toupil machines, moulding machines on solid wood, laminated and such.

    D R dCod Scule

    OR / HSS CMS / HM100 4 30 FP00 OR 100.4 FP00 CM 100.4

    5 FP00 OR 100.5 FP00 CM 100.56 FP00 OR 100.6 FP00 CM 100.67 FP00 OR 100.7 FP00 CM 100.78 FP00 OR 100.8 FP00 CM 100.810 FP00 OR 100.10 FP00 CM 100.1012 FP00 OR 100.12 FP00 CM 100.12

    110 10 30 FP00 OR 110.10 FP00 CM 110.1012 FP00 OR 110.12 FP00 CM 110.12

    125 4 30 FP00 OR 125.4 FP00 CM 125.45 FP00 OR 125.5 FP00 CM 125.56 FP00 OR 125.6 FP00 CM 125.68 FP00 OR 125.8 FP00 CM 125.810 FP00 OR 125.10 FP00 CM 125.1012 FP00 OR 125.12 FP00 CM 125.1214 FP00 OR 125.14 FP00 CM 125.1416 FP00 OR 125.16 FP00 CM 125.1618 FP00 OR 125.18 FP00 CM 125.18

    140 4 30 FP00 OR 140.4 FP00 CM 140.45 FP00 OR 140.5 FP00 CM 140.56 FP00 OR 140.6 FP00 CM 140.68 FP00 OR 140.8 FP00 CM 140.810 FP00 OR 140.10 FP00 CM 140.1012 FP00 OR 140.12 FP00 CM 140.1214 FP00 OR 140.14 FP00 CM 140.1416 FP00 OR 140.16 FP00 CM 140.1618 FP00 OR 140.18 FP00 CM 140.1820 FP00 OR 140.20 FP00 CM 140.2022 FP00 OR 140.22 FP00 CM 140.2224 FP00 OR 140.24 FP00 CM 140.24

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

  • 14

    2.4. Freze profilate cerc concav si convex / Profilierte Frsen konkave und konvexe Kreise / Simple profile cutters half-round, quarter-round conves radius, corner round cutters

    continuare

    D R dCod Scule

    OR / HSS CMS / HM160 6 30 FP00 OR 160.6 FP00 CM 160.6160 8 30 FP00 OR 160.8 FP00 CM 160.8160 10 30 FP00 OR 160.10 FP00 CM 160.10160 12 30 FP00 OR 160.12 FP00 CM 160.12160 14 30 FP00 OR 160.14 FP00 CM 160.14160 16 30 FP00 OR 160.16 FP00 CM 160.16160 18 30 FP00 OR 160.18 FP00 CM 160.18160 20 30 FP00 OR 160.20 FP00 CM 160.20160 22 30 FP00 OR 160.22 FP00 CM 160.22160 25 30 FP00 OR 160.25 FP00 CM 160.25160 30 30 FP00 OR 160.30 FP00 CM 160.30180 6 30 FP00 OR 180.6 FP00 CM 180.6180 8 30 FP00 OR 180.8 FP00 CM 180.8180 10 30 FP00 OR 180.10 FP00 CM 180.10180 12 30 FP00 OR 180.12 FP00 CM 180.12180 14 30 FP00 OR 180.14 FP00 CM 180.14180 16 30 FP00 OR 180.16 FP00 CM 180.16180 18 30 FP00 OR 180.18 FP00 CM 180.18180 20 30 FP00 OR 180.20 FP00 CM 180.20180 22 30 FP00 OR 180.22 FP00 CM 180.22180 25 30 FP00 OR 180.25 FP00 CM 180.25180 30 30 FP00 OR 180.30 FP00 CM 180.30180 35 30 FP00 OR 180.35 FP00 CM 180.35180 40 30 FP00 OR 180.40 FP00 CM 180.40

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

  • 15

    2.5. Freza unghiular / Winkel Frsen / Bevel chamfer cutters

    Cod grup / Gruppenkode / Groupe Code FP05

    Operaia: profilat cantMain: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: KantenprofilMaschine: MNF,MRPMaterial: Massives Holz, furnierte PlattenApplication: indicated for making bevel with fix angle on solid wood, laminated and such

    D B dCod Scule

    OR / HSS CMS / HMSens

    Stnga sau

    dreapta

    o125 20 22.5 30 FP05 OR 125.22,5 FP05 CM 125.22,5o125 25 45 30 FP05 OR 125.45 FP05 CM 125.45o125 30 30 30 FP05 OR 125.30 FP05 CM 125.30o160 30 45 30 FP05 OR 160.45 FP05 CM 160.45o160 30 30 30 FP05 OR 160.30 FP05 CM 160.30

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

  • 2.6. Frez scos pungi rin / Fresen fr die Entfernung von Harzanhufungen / Mini spot cutters

    Cod grup / Gruppenkode / Groupe Code FR01

    Opera ia: frezat pungi r inMa in : de scos pungi r inMaterial: lemn masiv, moale

    (rinos)

    Verfahren: Herausfrsen von HarzMaschine: zum Entfernen von HarzanhufungenMaterial: Massives Holz, weich (harzhaltig)

    2.6.1. Frez scos pungi rin cu plcue brazate / Fresen fr die Entfernung von Harzanhufungen / Mini spot cutters

    Application: for cutting out defects in solid wood.

    Application: for cutting out defects in solid wood

    2.6. Frez scos pungi rin / Fresen fr die Entfernung von Harzanhufungen / Mini spot cutters

    Cod grup / Gruppenkode / Groupe Code FR01A

    Opera ia: frezat pungi r inMa in : de scos pungi r inMaterial: lemn masiv, moale

    (rinos)

    Verfahren: Herausfrsen von HarzMaschine: zum Entfernen von HarzanhufungenMaterial: Massives Holz, weich (harzhaltig)

    2.6.2. Frez scos pungi rin cu plcue amovibile / Fresen fr die Entfernung von Harzanhufungen / Mini spot cutterheads

    16

    D B dCod Scule

    OR / HSS CMS / HM100 8 22 FR01 OR 100.8 FR01 CM 100.8

    D B d Cod scule100 8 22 FR01A100.8

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

  • 17

    2.7. Set freze executat brcue / Satz Frsen fr die Herstellung von Khnchen / Mini spot flicke

    Operaia: confecionat brcueMain: de confecionat brcue Material: lemn masiv, moale (rinos)

    Verfahren: Herstellung von KhnchenMaschine: fr die Herstellung von KhnchenMaterial: Massives Holz, weich (harzhaltig)

    Cod grup / Gruppenkode / Groupe Code FR02

    2.7.1. Set freze executat brcue cu plcue brazate / Satz Frsen fr die Herstellung von Khnchen / Mini spot flicke

    100 17 20 FR02 OR 100.17D B D Cod scule

    2.7. Set freze executat brcue / Satz Frsen fr die Herstellung von Khnchen / Mini spot flicke

    Operaia: confecionat brcueMain: de confecionat brcue Material: lemn masiv, moale (rinos)

    Verfahren: Herstellung von KhnchenMaschine: fr die Herstellung von KhnchenMaterial: Massives Holz, weich (harzhaltig)

    Cod grup / Gruppenkode / Groupe Code FR02A

    2.7.2. Set freze executat brcue cu plcue amovibile / Satz Frsen fr die Herstellung von Khnchen / Mini spot flicke with cutterheads

    100 17 20 FR02A100.17D B D Cod scule

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Application: for groving in solid wood.

    Application: for groving in solid wood.

  • 2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters

    Operaia: mbinare n dini pe lungime i limeMain: MNF, MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf Lnge und BreiteMaschine: MDF, MRPMaterial: Massives Holz

    Application: use for the execution of joints or beams soft wood.

    2.8.1. Freze pentru mbinri pe lungime / Frsen fr Zusammenfgung auf Lnge / Mini finger - jointing cutters

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    D B d Cod scule140 8,2 30 FI01OR140.8,2160 10,7 30 FI01OR160.10,7180 12,4 30 FI01OR180.12,4200 14,5 30 FI01OR200.14,5

    Operaia: mbinare n dini pe lungime Main: MNF,MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf Lnge Maschine: MDF, MRPMaterial: Massives Holz

    Application: use for the execution of joints or beams soft wood.

    18

    Cod grup / Gruppenkode / Groupe Code FI02

  • 2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters2.8.2. Freze pentru mbinri n dini pe lungime / Frsen fr Zusammenfgung auf Lnge / Mini finger - jointing cutters

    Cod grup / Gruppenkode / Groupe Code FI02

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Operaia: mbinare n dini pe lungime Main: MNF, MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf Lnge Maschine: MDF, MRPMaterial: Massives HolzApplication: use for the execution of joints or beams soft wood.

    D B d Cod scule75 2,5 30 FI02OR75.2,5100 3,7 30 FI02OR100.3,7140 3,8 30 FI01OR140.3,8

    2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters2.8.3. Freze pentru mbinri n dini pe lungime / Frsen fr Zusammenfgung auf Lnge / Mini finger - jointing cutters

    Cod grup / Gruppenkode / Groupe Code FI03

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Operaia: mbinare n dini pe lungime Main: MNF,MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf Lnge Maschine: MDF, MRPMaterial: Massives Holz

    Application: use for the execution of joints or beams soft wood.

    D B d Cod scule125 16.8 30 / 40 FI03OR 125.16,8125 23.8 30 / 40 FI03OR 125.23,8125 30.8 30 / 40 FI03OR 125.30,8140 16.8 30 / 40 FI03OR 140.16,8140 23.8 30 / 40 FI03OR 140.23,8140 30.8 30 / 40 FI03OR 140.30,8160 16.8 30 / 40 FI03OR 160.16,8160 23.8 30 / 40 FI03OR 160.23,8160 30.8 30 / 40 FI03OR 160.30,8

    19

  • 2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters2.8.4. Freze pentru mbinri n dini pe lungime / Frsen fr Zusammenfgung auf Lnge / Mini finger - jointing cutters

    Cod grup / Gruppenkode / Groupe Code FI04

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Operaia: mbinare n dini pe lungime Main: MNF,MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf Lnge Maschine: MDF, MRPMaterial: Massives Holz

    Application: use for the execution of joints or beams soft wood.

    D B d Cod scule160 26.6 40 / 50 FI04OR 160.26,6

    2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters2.8.5. Freze pentru mbinri n dini pe lungime cu plcue amovibile Frsen fr Zusammenfgung auf Lnge / Mini finger jointing cutterheads

    Cod grup / Gruppenkode / Groupe Code FI05A

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Operaia: mbinare n dini pe lungime Main: MNF, MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf Lnge Maschine: MDF, MRPMaterial: Massives Holz

    Application: use for the execution of joints or beams soft wood.

    D B d Cod sculez160 26.6 40 4 FI05AOR 160.26,6

    20

  • 2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters2.8.6. Freze pentru mbinri n dini pe lime / Frsen fr Zusammenfgung auf Breiten / Glue jointing cutters

    Cod grup / Gruppenkode / Groupe Code FI06

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Operaia: mbinare n dini pe lime Main: MNF, MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf BreiteMaschine: MDF, MRPMaterial: Massives Holz

    D B d H a Cod scule125 22 30 11 4 FI06OR125.11.4125 32 30 15 5 FI06OR125.15.5125 42 30 18 8 FI06OR125.18.8125 63 30 27 12 FI06OR125.27.12125 63 30 63 4 FI06OR125.63.4125 50 30 16 5 FI06OR125.16.5125 60 30 24 5 FI06OR125.24.5125 50 30 16.2 8 FI06OR125.16,2.8125 60 30 27 8 FI06OR125.27.8125 50 30 18 10 FI06OR125.18.10125 60 30 30 10 FI06OR125.30.10125 80 30 80 3 FI06OR125.80.3

    Application: use for the execution of joints with a ajustable height

    21

    I1

    I2

    I3

    I4

    I5

  • I6

    I7

    I8

    I9

    I11

    I12

    I10

    2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters2.8.6. Freze pentru mbinri n dini pe lime / Frsen fr Zusammenfgung auf Breiten / Glue jointing cutters

    continuare

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    22

  • 2.8. Freza pentru mbinri / Frsen fr Zusammenfgung / Mini finger - jointing cutters

    Cod grup / Gruppenkode / Groupe Code FI07

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    Application: use for the execution of joints with a ajustable height

    2.8.7 Freza pentru mbinri n dini pe lime cu plcue amovibile / Frsen fr Zusammenfgung auf Breiten / Glue jointing cutterheads

    D B d Cod sculez140 50 30 / 40 4 FI07AOR 140.16.5140 60 30 / 40 4 FI07AOR 140.24.5140 50 30 / 40 4 FI07AOR 140.16,2.8140 60 30 / 40 4 FI07AOR 140.27.8160 50 30 / 40 4 FI07AOR 160.18.10160 60 30 / 40 4 FI07AOR 160.30.10140 80 30 / 40 4 FI07AOR 160.80.3

    23

    Operaia: mbinare n dini pe lime Main: MNF, MRPMaterial: lemn masiv

    Verfahren: Zusammenfgung durch Zhne auf BreiteMaschine: MDF, MRPMaterial: Massives Holz

    I12

    I1

    I2

    I4

    I5

    I6

    I7

    I3

  • Cod grup / Gruppenkode / Groupe Code FG00

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.9 Set freze pentru geamuri si usi / Satz Frsen fr Fenster und Tren / Cutters for wings

    Application: use for the execution of profiles, counter profiles and central panels for cabinet doors.

    Operaia: frezat profileMain: MNF, MRPMaterial: lemn masiv

    Verfahren: Frsen von ProfilenMaschine: MNF, MRPMaterial: Massives Holz

    Aceste freze se execut numai la comand, n funcie de profilul dorit specificndu-se urmtoarele caracteristici:

    ! diametru exterior max al sculei! diametru interior al sculei! maina pe care se excut operaia de frezare i turaia! sensul de rotaie al sculei! materialul lemnos ce se prelucreaz! profilul lemnului

    24

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    A

    B

    C

    D

    E

  • II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.9 Set freze pentru geamuri si usi / Satz Frsen fr Fenster und Tren / Cutters for wings

    25

    F

    G

    H

    I

    J

    K

  • Cod grup / Gruppenkode / Groupe Code FA00

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.10 Freza pentru abltuit / Frsen zum Abtragen / Panel raising cutters

    Application: use for the production of raised panels for furniture and doors.

    Operaia: profilat cant tbliiMain: MNFMaterial: lemn masiv

    Verfahren: Profilieren der TrfllungenMaschine: MNFMaterial: Massives Holz

    D d OR / HSSCod scule

    CMS / HM160 30 FA00 OR 160.30 FA00 CM 160.30180 30 FA00 OR 180.30 FA00 CM 180.30210 30 FA00 OR 210.30 FA00 CM 210.30

    26

  • II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.10 Freza pentru abltuit / Frsen zum Abtragen / Panel raising cutters

    27

  • II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.11 Set freze pentru mbinri tip lamb - uluc / Satz Frsen fr Zusammenfgung Nut und Feder (Parkett Wandtfelung) / Tongue and grave cutters

    Application: use for woorking tongue and groves in solid wood. To use on toupie moulding and double end tononers.

    D OR / HSSCod scule

    CMS / HMdS

    125 1338 30 FL00 OR 125.30 FL00 CM 125.30 140 1338 40 FL00 OR 140.40 FL00 CM 140.40160 1338 40 FL00 OR 160.40 FL00 CM 160.40180 1338 60 FL00 OR 180.60 FL00 CM 180.60

    Operaia: profilat cantMain: MNF, MRPMaterial: lemn masiv

    Cod grup / Gruppenkode / Groupe Code FL01 z=4 FL02 z=6Verfahren : KantenprofilierungMaschine: MNF, MRPMaterial: Massives Holz

    28

  • - continuare -

    II. FR

    EZE

    CU A

    LEZA

    J / F

    RS

    EN

    M

    IT B

    OH

    RUN

    G / C

    UTTE

    RS

    II. Freze cu alezaj / Frsen Mit Bohrung / Cutters

    2.11 Set freze pentru mbinri tip lamb - uluc /

    Tongue and grave cuttersSatz Frsen fr Zusammenfgung Nut und Feder

    (Parkett Wandtfelung) /

    29

  • Application: use for the execution of several profiles in solid wood, chipboard or MDF

    III. Freze profilate cu alezaj Profilierte Frsen mit Bohrung / Multiprofile Cutters

    3.1. Freza profilat cu plcue brazate /Profilierte Frsen mit geschleiftenoder Plttchen /Multiprofile cutters

    Operatia: frezat profileMasina: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: ProfilfrsenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    III. FR

    EZE

    PRO

    FILA

    TE CU

    A

    LEZA

    J /

    PRO

    FILI

    ERTE

    FRS

    EN M

    IT B

    OH

    RUN

    G / M

    ULTI

    PRO

    FILE

    CU

    TTER

    S

    Aceste freze se execut numai la comand, specificndu-se urmtoarele:4se va executa schia profilului cu toate cotele necesare construirii

    profilului

    Caracteristicile sculei:8diametrul alezajului8utilajul pe care lucreaz i turaiile de lucru8avansul mecanic sau manual8n caz de canal de pan se vor indica dimensiunile canalului8n cazul unor frezri la care diametrul exterior este limitat se va

    indica max.8se va indica dac frezarea se face pe o pies cu cantul drept sau

    n linie curb8se va indica materialul ce se prelucreaz

    Pentru alte scule speciale se va prezenta mostra lemnului sau desenul profilului lemnului.

    30

    1 2 3 4

    5 6 7 8

  • III. FR

    EZE

    PRO

    FILA

    TE CU

    A

    LEZA

    J /

    PRO

    FILI

    ERTE

    FRS

    EN M

    IT B

    OH

    RUN

    G / M

    ULTI

    PRO

    FILE

    CU

    TTER

    S

    31

  • 3.2. Freza profilat cu plcue amovibile /Profilierte Frsen mit abnehmbaren Plttchen /Multiprofile cutterheads

    3.3. Freza profilat tip melc cu plcue brazate / Multischneidender profilfrser / Multiprofile helical cutter

    3.4. Freza profilat tip melc cu plcue amovibile / Multischneidender profilfrser / Multiprofile helical cutterheads

    III. FR

    EZE

    PRO

    FILA

    TE CU

    A

    LEZA

    J /

    PRO

    FILI

    ERTE

    FRS

    EN M

    IT B

    OH

    RUN

    G / M

    ULTI

    PRO

    FILE

    CU

    TTER

    S

    Se execut numai la comand. / Erzeugen auf Bestellung. / We produce only at order.

    Application: use for the execution of several profiles in solid wood, chipboard or MDF

    Operatia: frezat profileMasina: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: ProfilfrsenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    Application: use for the execution of several profiles in solid wood, chipboard or MDF

    Operatia: frezat profileMasina: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: ProfilfrsenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    Application: use for the execution of several profiles in solid wood, chipboard or MDF

    Operatia: frezat profileMasina: MNF, MRPMaterial: lemn masiv, panouri furniruite

    Verfahren: ProfilfrsenMaschine: MNF, MRPMaterial: Massives Holz, furnierte Platten

    III. Freze profilate cu alezaj Profilierte Frsen mit Bohrung / Multiprofile Cutters

    III. Freze profilate cu alezaj Profilierte Frsen mit Bohrung / Multiprofile Cutters

    III. Freze profilate cu alezaj Profilierte Frsen mit Bohrung / Multiprofile Cutters

    32

    Se execut numai la comand. / Erzeugen auf Bestellung. / We produce only at order.

    Se execut numai la comand. / Erzeugen auf Bestellung. / We produce only at order.

  • 3.5. Set freze profilate pentru geam termopan / Satz Frsen fr Fenster mit Thermodichtung / Set of Multiprofile cutters for windows

    Profile interioare i exterioareInnere und uere ProfileInterior and Exterior Profile

    Profile pentru mbinri de captProfile fr Zusammenfgung der EndenEnd joining Profile

    2010

    1012

    16

    65

    45

    PF 05 = PN 05Lonjeron superior i inferior tocOberer und unterer LngstrgerWing jambs abd wind crosspice frame

    2016

    45

    65

    80

    1210

    10

    PF 06 Travers superioar tocObere Traverse fr TrrahmenSuperior sleeper frame

    2010

    1012

    16

    45

    8

    7

    4

    65

    80

    59,86

    PN 06 Travers superioar tocObere Traverse fr TrrahmenSuperior sleeper frame

    1622

    1515

    8

    15

    20

    4

    1622

    1020

    15

    12

    8

    PF 01 PN 01

    1810

    1410

    16

    8

    2424

    10

    10

    20

    15

    8

    7

    18

    PF 02 = PN 02 PF 03 = PN 03

    3

    2

    PF 09 = PN 09

    16,5

    2526

    ,5

    5

    18

    20

    8

    PF 10 = PN 10

    1144

    13

    4

    30

    330

    25,5

    15PF 04=PN 04

    1611

    28,5

    12,5

    1,5

    4

    4,9

    5

    4

    521

    3

    15

    15

    PF 08 = PN 08

    III. Freze profilate cu alezaj Profilierte Frsen mit Bohrung / Multiprofile Cutters

    33

    III. FR

    EZE

    PRO

    FILA

    TE CU

    A

    LEZA

    J /

    PRO

    FILI

    ERTE

    FRS

    EN M

    IT B

    OH

    RUN

    G / M

    ULTI

    PRO

    FILE

    CU

    TTER

    S

  • 34

    10

    5

    119,

    910

    1059

    76,46

    54

    17,159

    PF 15 = PN 15

    Etanare cu dou garnituriAbdichtung mit zwei DichtungenTo make airtight with two fittings

    Lonjeron cerceveaLngstrger FensterrahmenWing jambs tenaning

    17,1

    1010

    109,

    911

    5

    59

    59

    77

    4

    7

    4

    PF 14 =PN 14

    Travers cerceveaTraverse des FensterrahmensSleeper crosspiece tenaning

    4 10

    2010

    72

    73

    1216

    15

    80

    PF 07=PN 07

    Travers inferioar tocUntere Traverse fr TrrahmenSubordinate sleeper frame

    34,2

    16,3

    12,3

    12

    9,5

    1

    PF 13 = PN 13

    24208

    24

    15

    18

    PF 16 = PN 16

    5

    10

    5

    4

    4

    15

    PF 11 = PN 11

    23,516

    ,5

    8

    20,9

    5

    10,6

    28

    8

    4

    10

    PF 12 = PN 12

    8

    1515

    420

    2216

    15

    PN 17

    2010

    2216

    15

    12

    8

    PF 17

    3.5. Set freze profilate pentru geam termopan / Satz Frsen fr Fenster mit Thermodichtung / Set of Multiprofile cutters for windows

    Profile interioare i exterioareInnere und uere ProfileInterior and Exterior Profile

    Profile pentru mbinri de captProfile fr Zusammenfgung der EndenEnd joining Profile

    III. Freze profilate cu alezaj Profilierte Frsen mit Bohrung / Multiprofile Cutters

    III. FR

    EZE

    PRO

    FILA

    TE CU

    A

    LEZA

    J /

    PRO

    FILI

    ERTE

    FRS

    EN M

    IT B

    OH

    RUN

    G / M

    ULTI

    PRO

    FILE

    CU

    TTER

    S

    continuare

  • 35

    4.1. Frez cilindric cu coad cu Z = 1 / Zylinderfrmige Frsen mit Schaft mit einer Scheide / Router bits

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 011

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    Operaia: frezat canalMaina: de frezat cu ax superior cu prindere excentricMaterial: lemn masiv, panouri furniruite

    Verfahren: KanalfrsenMaschine: zum Frsen mit einer oberen Achse und exzentrischer BefestigungMaterial: Massives Holz, furnierte PlattenApplication: use on CNC or regular machines for gooving, rabbeting and plunge cutting on solid wood, laminated and such.

    D L Formd lCod Scule

    OR / HSS CMS / HM3 40 9,5 10 B FK1. 01.OR.3.40 FK1. 01.CM.3.404 40 9,5 13 B FK1. 01.OR.4.40 FK1. 01.CM.4.406 40 9,5 13 B FK1. 01.OR.6.40 FK1. 01.CM.6.407 50 9,5 21 B FK1. 01.OR.7.50 FK1. 01.CM.7.508 55 9,5 24 B FK1. 01.OR.8.55 FK1. 01.CM.8.559 55 9,5 27 B FK1. 01.OR.9.55 FK1. 01.CM.9.559.5 55 9,5 30 A FK1. 01.OR.9,5.55 FK1. 01.CM.9,5.5510 60 12 30 B FK1. 01.OR.10.60 FK1. 01.CM.10.6011 60 12 30 B FK1. 01.OR.11.60 FK1. 01.CM.11.6012 60 12 30 A FK1. 01.OR.12.60 FK1. 01.CM.12.6014 65 12 35 A / C FK1. 01.OR.14.65 FK1. 01.CM.14.6516 65 12 35 A / C FK1. 01.OR.16.65 FK1. 01.CM.16.6518 70 12 40 A / C FK1. 01.OR.18.70 FK1. 01.CM.18.7020 70 12 40 A / C FK1. 01.OR.20.70 FK1. 01.CM.20.7022 70 12 40 A / C FK1. 01.OR.22.70 FK1. 01.CM.22.70

    Forma A

    Forma B

    Forma C

  • D L l1 Cod Sculed04 43 10 M10 FK2 01 OR 4.436 50 16 M10 FK2 01 OR 6.508 54 20 M10 FK2 01 OR 8.5410 60 25 M10 FK2 01 OR 10.6012 63 28 M10 FK2 01 OR 12.6314 65 30 M10 FK2 01 OR 14.6516 67 32 M10 FK2 01 OR 16.6718 75 40 M10 FK2 01 OR 18.75

    36

    4.2 Frez cilindric cu coad filetet M10 Z = 2 pentru mbinri drepte / Zylinderfrmige Frse mit eingeschraubtem Schaft M10 mit zwei Schneiden fr gerade Zusammenfgungen / Router bits with M10 shank

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 012

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    Operatia: frezat canal Masina: de frezat cu ax superior Material: lemn masiv

    Verfahren: KanalfrsenMaschine: zum Frsen mit oberer Achse Material: Massivholz

    Application: to make grooves for coupling of drowers.

    4.3 Frez cilindric cu coad filetet M10 Z = 2 pentru mbinri coad de rndunic / Zylinderfrmige Frsen mit eingeschraubtem Schaft mit zwei Schneiden fr Zusammenfgungen Schwalbenschwanz / Router bits with M10 shank

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 022

    Operaia: frezat canal Maina: de frezat cu ax superior Material: lemn masiv

    Verfahren: KanalfrsenMaschine: zum Frsen mit oberer Achse Material: Massivholz

    Application: to make grooves for coupling of drowers.

    D L l1 Cod Sculed08 50 13 M10 FK2 02 OR 8.5010 53 15 M10 FK2 02 OR 10.5312 56 18 M10 FK2 02 OR 12.5615 60 23 M10 FK2 02 OR 15.6018 63 27 M10 FK2 02 OR 18.6320 67 30 M10 FK2 02 OR 20.6722 70 33 M10 FK2 02 OR 22.70

  • Operatia: frezat canale Masina: de frezat cu ax superiorMaterial: lemn masiv

    4.4 Frez cilindric cu coad cu Z = 2 pentru frezat canale / Zylinderfrmige Frsen mit Schaft mit zwei Schneiden zum Kanalfrsen / Router bits

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 032

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    Verfahren: KanalfrsenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz

    D L l1 d0Cod Scule

    OR / HSS CMS / HM4 65 32 9.5 FK2 03 OR 4.65 FK2 03 CMS 4.65 5 70 42 9.5 FK2 03 OR 5.70 FK2 03 CMS 5.706 75 45 9.5 FK2 03 OR 6.75 FK2 03 CMS 6.757 80 50 9.5 FK2 03 OR 7.80 FK2 03 CMS 7.808 85 56 9.5 FK2 03 OR 8.85 FK2 03 CMS 8.859 90 60 9.5 FK2 03 OR 9.90 FK2 03 CMS 9.90 10 100 70 9.5 FK2 03 OR 10.100 FK2 03 CMS 10.10011 100 70 9.5 FK2 03 OR 11.100 FK2 03 CMS 11.10012 105 70 12 FK2 03 OR 12.105 FK2 03 CMS 12.10513 110 80 12 FK2 03 OR 13.110 FK2 03 CMS 13.11014 110 80 12 FK2 03 OR 14.110 FK2 03 CMS 14.11015 115 85 12 FK2 03 OR 15.115 FK2 03 CMS 15.115

    Application: use on CNC or regular machines for gooving, jointing, rabbeting and plunge cutting on solid wood, laminated and such.

    La comand se pot executa i alte dimensiuni.Auf Bestellung kann man auch andere Dimensionen erzeugen. At order we are able to produce others dimensions.

    37

    4.5 Frez cilindric cu coad pentru scobit cu 2 canale / Zylinderfrmige Frsen mit Schaft zum Aushhlen mit zwei Kanlen / Slot mortise bits

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 042

    Application: to make grooves and mortises on solid wood, wood compositer, laminated and such

    D L l1 Cod Sculed x l26 90 38 13x40 FK204 OR 6.90 7 95 42 13x40 FK204 OR 7.958 95 42 13x40 FK204 OR 8.959 100 42 13x40 FK204 OR 9.10010 105 50 13x40 FK204 OR 10.10511 110 55 13x40 FK204 OR 11.11012 115 60 13x40 FK204 OR 12.11513 115 60 13x40 FK204 OR 13.11514 120 65 16x40 FK204 OR 14.12015 120 65 16x40 FK204 OR 15.12016 120 65 16x40 FK204 OR 16.120

    Operaia: de frezat canaleMaina: de gurit i de scobit Material: lemn masiv

    Verfahren: KanalfrsenMaschine: zum Bohren und AushhlenMaterial: Massives Holz

  • Operaia: de frezat canaleMaina: de gaurit i de scobit Material: lemn masiv

    4.7 Frez cilindric cu coad pentru scobit cu 2 canale i sfrmtori de achie/ Zylinderfrmige Frse mit Schaft zum Aushhlen mit 2 Kanlen und Zerkleinerer der Holzspne / Slot mortise bits with chipbreaker

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 062

    Application: to make groves and mortises on solid wood.

    Verfahren: KanalfrsenMaschine: zum Bohren und AushhlenMaterial: Massives Holz

    D L Cod Sculed x l26 120 13 x 50 FK206 OR 6.1208 130 13 x 50 FK206 OR 8.130 10 140 13 x 50 FK206 OR 10.14012 150 13 x 50 FK206 OR 12.15014 160 13 x 50 FK206 OR 14.16016 170 16 x 50 FK206 OR 16.17018 180 16 x 50 FK206 OR 18.18020 185 16 x 50 FK206 OR 20.18522 190 16 x 50 FK206 OR 22.19024 195 16 x 50 FK206 OR 24.19526 200 20 x 50 FK206 OR 26.20028 210 20 x 50 FK206 OR 28.21030 210 20 x 50 FK206 OR 30.210

    38

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    4.6 Frez cilindric cu coad pentru scobit cu 4 canale / Zylinderfrmige Frse mit Schaft zum Aushhlen mit 4 Kanlen / Slot mortise bits

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 052

    Application: to make groves and mortises on solid wood.

    Operaia: de frezat canaleMaina: de gurit i de scobit Material: lemn masiv

    Verfahren: KanalfrsenMaschine: zum Bohren und AushhlenMaterial: Massives Holz

    D L l1 Cod Sculed x l26 90 38 13x40 FK205 OR 6.90 7 95 42 13x40 FK205 OR 7.958 95 42 13x40 FK205 OR 8.959 100 45 13x40 FK205 OR 9.10010 105 50 13x40 FK205 OR 10.10511 110 55 13x40 FK205 OR 11.11012 115 60 13x40 FK205 OR 12.11513 115 60 13x40 FK205 OR 13.11514 120 65 16x40 FK205 OR 14.12015 120 65 16x40 FK205 OR 15.12016 120 65 16x40 FK205 OR 16.120

  • 39

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    4.8 Frez cu coad cilindric pentru sculptur Z = 1 / Zylinderfrmige Frsen mit Schaft fr Skulptur (Z=1) Drills for carvin machines Z = 1

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 072

    Operatia: profilareMasina: de sculptat Material: lemn masiv

    Verfahren: ProfilierenMaschine: fr Ausmeielung Material: Massives Holz

    Application: to make groves and mortises on solid wood.

    D L d0 Cod Sculesens2 75 9 stnga FK207 OR 2.754 75 9 sau FK207 OR 4.756 75 9 dreapta FK207 OR 6.758 75 9 FK207 OR 8.759 75 9 FK207 OR 9.7510 85 9 FK207 OR 10.8512 85 9 FK207 OR 12.85

    Operatia: profilareMasina: de sculptat Material: lemn masiv

    4.9 Frez cu coad cilindric pentru sculptur Z = 2 / Zylinderfrmige Frse fr Skulptur (Z=2) / Drills for carvin machines Z = 2

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 082 Verfahren: ProfilierenMaschine: zum Ausmeieln Material: Massivholz

    Application: to make groves and mortises on solid wood.

    D L d0 Cod Sculesens10 87 9 Stnga FK208 OR 10.87 12 87 9 sau FK208 OR 12.8715 77 9 Dreapta FK208 OR 15.7718 77 9 FK208 OR 18.7720 77 9 FK208 OR 20.7722 77 9 FK208 OR 22.7724 77 9 FK208 OR 24.77

  • 40

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    4.10 Frez cu coad cilindric pentru ndreptat Z = 2 / Zylinderfrmige Frse mit Schaft zum Abrichten (Z=2) Routers bits

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 013

    Application: use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezatMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Verfahren: FrsenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz, furnierte Platten

    D L1 L2 dCod Scule

    OR / HSS CMS / HM8 55 15 6;8;9; FK301 OR 8.55 FK301 CM 8.55 10 55 15 9.5;10; FK301 OR 10.55 FK301 CM 10.5512 60 20 12 in FK301 OR 12.60 FK301 CM 12.6014 60 20 funcie FK301 OR 14.60 FK301 CM 14.6015 60 20 de co- FK301 OR 15.60 FK301 CM 15.6016 60 20 mand FK301 OR 16.60 FK301 CM 16.6018 65 25 FK301 OR 18.65 FK301 CM 18.6520 65 25 FK301 OR 20.65 FK301 CM 20.6522 65 25 FK301 OR 22.65 FK301 CM 22.6525 70 30 FK301 OR 25.70 FK301 CM 25.70

    4.11 Frez cu coad cilindric pentru ndreptat Z=2 cu rulment / Nutfrser Z = 2 mit anlauflager / Routers bits with bearing

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 013

    Application : use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezatMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Verfahren: FrsenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz, furnierte Platten

    D L l Cod Sculed Z13 70 20 6 / 8 / 10 / 12 2 20FK301CM13.7013 75 25 6 / 8 / 10 / 12 2 20FK301CM13.7519 70 20 6 / 8 / 10 / 12 2 20FK301CM19.7019 75 25 6 / 8 / 10 / 12 2 20FK301CM19.7519 80 30 6 / 8 / 10 / 12 2 20FK301CM19.80

  • 41

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    4.12 Frez cu coad cilindric pentru ndreptat Z = 2+1 / Zylinderfrmige Frse mit Schaft zum Abrichten (Z = 2+1) / Routers bits Z = 2+1

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 023

    D L1 L2 dCod Scule

    OR / HSS CMS / HM8 55 15 6;8;9; FK302 OR 8.55 FK302 CM 8.5510 55 15 9.5;10; FK302 OR 10.55 FK302 CM 10.5512 60 20 12 n FK302 OR 12.60 FK302 CM 12.6014 60 20 funcie FK302 OR 14.60 FK302 CM 14.6015 60 20 de co- FK302 OR 15.60 FK302 CM 15.6016 60 20 mand FK302 OR 16.60 FK302 CM 16.6018 65 25 FK302 OR 18.65 FK302 CM 18.6520 65 25 FK302 OR 20.65 FK302 CM 20.6522 65 25 FK302 OR 22.65 FK302 CM 22.6525 70 30 FK302 OR 25.70 FK302 CM 25.70

    Application : use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezatMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Verfahren: FrsenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz, furnierte Platten

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.13 Frez cu coad cilindric pentru ndreptat cu plcue amovibile / Wendeplatten - bndigfrser / Routers bits with reversible knives

    Cod grup / Gruppekode / Groupe Code FK 01A3

    Application: use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezatMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Anwendung : zum bndigfrser von kunstsoff oder furnierkanten, formatieren, flzen in beliebiger, tiefe, kopieren bei oben liegender schablone.

    D L l Cod Sculed Z16 90 30 20 / 25 1 20FK301A16.9016 100 40 20 / 25 1 20FK301A16.10016 110 50 20 / 25 1 20FK301A16.11020 90 30 20 / 25 2 20FK301A20.9020 100 40 20 / 25 2 20FK301A20.10020 110 50 20 / 25 2 20FK301A20.11025 90 30 20 / 25 2 20FK301A25.9025 100 40 20 / 25 2 20FK301A25.10025 110 50 20 / 25 2 20FK301A25.110

  • 42

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.14 Frez cu coad cilindric pentru ndreptat cu plcue amovibile i rulment / Wendeplatten - bndigfrser mit anlanflager / Routers bits with reversible knives and bearing

    Cod grup / Gruppekode / Groupe Code FK 01A3

    Application: use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezatMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Anwendung: zum bndigfrser von kunstsoff oder furnierkanten, formatieren, flzen in beliebiger, tiefe, kopieren bei oben liegender schablone.

    D L l Cod Sculed Z19 100 30 20 / 25 2 20FK301A19.1019 110 40 20 / 25 2 20FK301A19.11019 120 50 20 / 25 2 20FK301A19.120

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.15 Frez cu coad CM2 pentru ndreptat / Frse mit Schaft CM2 zum Abrichten / Routers bits

    Cod grup / Gruppekode / Groupe Code FK 033

    Application: use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezat cantMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Verfahren: KantenfrsenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz, furnierte Platten

    D L lCod Scule

    OR / HSS CMS / HM25 125 25 FK303 OR 25.125 FK303 CM 25.12525 140 40 FK303 OR 25.140 FK303 CM 25.14040 125 25 FK303 OR 40.125 FK303 CM 40.12540 140 40 FK303 OR 40.140 FK303 CM 40.140

  • 43

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.16 Frez cu coad CM2 pentru ndreptat cu plcue amovibile / Wendeplatten - bndigfrser / Routers bits with reversible knives

    Cod grup / Gruppekode / Groupe Code FK 03A3

    Application: use on CNC or regular machines for gooving, jointing, rabbeting and pluge cutting on solid wood, wood composites, laminated and such.

    Operatia: frezatMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Anwendung: zum bndigfrser von kunstsoff oder furnierkanten, formatieren, flzen in beliebiger, tiefe, kopieren bei oben liegender schablone.

    D L l Cod SculeZ25 130 30 2 20FK303A25.13025 140 40 2 20FK303A25.14025 150 50 2 20FK303A25.15030 130 30 2 20FK303A30.13030 140 40 2 20FK303A30.14030 150 50 2 20FK303A30.15040 130 30 2 20FK303A40.13040 140 40 2 20FK303A40.14040 150 50 2 20FK303A40.150

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.17 Frez cu coad CM2 unghiular / Winkelfrse mit Schaft CM2 / Edge trimming cutters

    Cod grup / Gruppekode / Groupe Code FK 043

    Operatia: profilat cantMasina: de frezat cu ax superiorMaterial: lemn masiv, panouri furniruite

    Verfahren: KantenprofilierenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz, furnierte Platten

    Application: indicated for marking bevel with fix angle on solid wood, laminated and such.

    D d lCod Scule

    OR / HSS CMS / HM25 42 13 32 132 FK304 OR 25.132 FK304 CM 25.13245 52 12.6 40 140 FK304 OR 45.140 FK304 CM 45.140

    L

  • 44

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.18 Frez cu coad CM2 cu profil concav cerc / Frse mit Schaft CM2 Konkaver Kreis / Routers bits quarter rond

    Cod grup / Gruppekode / Groupe Code FK 053

    Operatia: profilat cantMasina: de frezat cu ax superiorMaterial: lemn masiv

    Verfahren: KantenprofilierenMaschine: zum Frsen mit oberer AchseMaterial: Massives Holz

    Application: used for the execution of profiles on CNC or regular machines.

    r l LCod Scule

    OR / HSS CMS / HM2.5 22.6 12 112 FK3 05 OR 2,5.112 FK3 05 CM 2,5.1123 22.6 12 112 FK3 05 OR 3.112 FK3 05 CM 3.1124 22.6 12 112 FK3 05 OR 4.112 FK3 05 CM 4.1126 27.4 15 115 FK3 05 OR 6.115 FK3 05 CM 6.1158 32.4 15 115 FK3 05 OR 8.115 FK3 05 CM 8.11510 37.2 20 120 FK3 05 OR 10.120 FK3 05 CM 10.12012 42.2 24 124 FK3 05 OR 12.124 FK3 05 CM 12.124

    D

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.19 Frez cu coad pentru cepuri rotunde / Frse fr runde Zapfen / Cutters for wiredrowing stroight slots

    Cod grup / Gruppekode / Groupe Code FK 014

    Operatia: executat bete rotundeMasina: de executat bete rotundeMaterial: lemn masiv

    Verfahren: Herstellung von runden StbenMaschine: zum Herstellen von runden StbenMaterial: Massives Holz

    Application: to make dowels on drowersmae of solid wood.

    Dd Cod Sculed 06 25 M 20 x 1,5 FK4 01 OR 6.256.2 sau FK4 01 OR 6,2.258 M 22 x1,5 FK4 01 OR 8.258.2 sau FK4 01 OR 8,2.2510 G FK4 01 OR 10.2510.2 FK4 01 OR 10,2.2512 FK4 01 OR 12.2512.2 FK4 01 OR 12,2.25

  • 45

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.20 Frez cu coad cilindric pentru ndreptat tip melc / Multischneidender oberfrser / Routers bits spiral cutters

    Cod grup / Gruppekode / Groupe Code FK 063

    Anwendung: mit verschobenen spiraligen schneiden fur larmsenkung und abfuhrsteigerung.

    Application: specially suitable for cutting on edge and make dividing cuts in case of big removals.

    Operatia: frezare Masina: CNCMaterial: lemn masiv. panouri furniruite, MNF

    D L l Cod Sculed Z30 95 30 20 / 25 2 20FK306CM30.9530 105 40 20 / 25 2 20FK306CM30.10530 115 50 20 / 25 2 20FK306CM30.11540 85 30 20 / 25 2 20FK306CM40.8540 95 40 20 / 25 2 20FK306CM40.9540 105 50 20 / 25 2 20FK306CM40.10540 115 60 20 / 25 2 20FK306CM50.11550 85 30 20 / 25 2 20FK306CM50.8550 95 40 20 / 25 2 20FK306CM50.9550 105 50 20 / 25 2 20FK306CM50.10550 115 60 20 / 25 2 20FK306CM50.115

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.21 Frez cu coad cilindric pentru ndreptat tip melc cu plcue amovibile / Multischneidender oberfrser / Routers bits spiral cutterheads

    Cod grup / Gruppekode / Groupe Code FK 06A3 Anwendung: mit verschobenen spiraligen schneiden fur larmsenkung und abfuhrsteigerung.

    Application: specially suitable for cutting on edge and make dividing cuts in case of big removals

    Operatia: frezare Masina: CNCMaterial: lemn masiv. panouri furniruite, MNF

    D Ll Cod Sculed40 68 118 20 FK306A40.11840 78 128 20 FK306A40.12850 68 118 20 FK306A50.11850 78 128 20 FK306A50.12850 88 138 20 FK306A50.138

  • 46

    IV. FR

    EZE

    CU CO

    AD

    / F

    RS

    EN

    M

    IT SC

    HA

    FT / R

    OUT

    ER B

    ITS

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    4.22 Frez cu coad CM2 pentru ndreptat tip melc/ Multischneidender oberfrsser / Routers bits spiral cutters

    Cod grup / Gruppekode / Groupe Code FK 073 Anwendung : mit verschobenen spiraligen schneiden fur larmsenkung und abfuhrsteigerung.

    Application : specially suitable for cutting on edge and make dividing cuts in case of big removals.

    D L l Cod Scule30 135 30 20FK307CM30.13530 145 40 20FK307CM30.14530 155 50 20FK307CM30.15540 135 30 20FK307CM40.13540 145 40 20FK307CM40.14540 155 50 20FK307CM40.15540 165 60 20FK307CM40.16550 135 30 20FK307CM50.13550 145 40 20FK307CM50.14550 155 50 20FK307CM50.15550 165 60 20FK307CM50.165

    Operatia: frezare Masina: CNCMaterial: lemn masiv. panouri furniruite, MNF

    IV. Freze cu coad / Frsen Mit Schaft / Router Bits

    Cod grup / Gruppekode / Groupe Code FK 07A3 Anwendung : mit verschobenen spiraligen schneiden fur larmsenkung und abfuhrsteigerung.

    Application : specially suitable for cutting on edge and make dividing cuts in case of big removals.

    4.23 Frez cu coad CM2 pentru ndreptat tip melc cu plcue amovibile / Multischneidender oberfrser / Routers bits spiral cutterheads

    Operatia: frezare Masina: CNCMaterial: lemn masiv. panouri furniruite, MNF

    D Ll Cod Scule40 68 166 FK307A40.16640 78 176 FK307A40.17650 68 166 FK307A50.16650 78 176 FK307A50.17650 88 186 FK307A50.186

  • V. Freze cu coad / Frsen mit Schaft / Router bits

    5.1. Frez cu coad profilat / Profilierte Frsen mit Schaft / Router bits with simple and complex profiles

    V. FR

    EZE

    CU CO

    AD

    /

    FRS

    EN

    MIT

    SC

    HA

    FT / R

    OUT

    ER B

    ITS

    Deoarece gama de freze profilate cu coad este foarte diversificat v vom prezenta n continuare o fi de comand pentru aceste freze:Se va executa schia profilului cu toate cotele necesare:Caracteristicile sculei:4 diametrul maxim admisibil4 diametrul minim admisibil4 diametrul cozii4 sensul de rotaie al frezei4 se va indica dac frezarea se face pe o pies cu cantul drept sau n linie curb4 se va indica materialul

    5.1.1 Freza cu coada profilat cu plcue brazate / Profilmesserkopf variform / Router bits with simple and complex profiles

    5.1.2 Freza cu coad profilat cu plcue amovibile / Profilmesserkopf variform / Routers bits simple and complex profiles with cutterheads

    Application: use for the execution of several profiles in solid wood, chipboard or MDF

    47

    Operatia: frezareMasina: CNCMaterial: lemn masiv, panouri furniruite, materiale plastice

    Verfahren: FrsenMaschine: CNCMaterial: Massives Holz, furnierte Platten

    V. Freze cu coad / Frsen mit Schaft / Router bits

    V. Freze cu coad / Frsen mit Schaft / Router bits

    Application: use for the execution of several profiles in solid wood, chipboard or MDF

    Cod grup / Gruppenkode / Groupe Code

    Operatia: frezareMasina: CNCMaterial: lemn masiv, panouri furniruite, materiale plastice

    Verfahren: FrsenMaschine: CNCMaterial: Massives Holz, furnierte Platten

  • 5.2.1 Frez elicoidal cu coada Z=1 / Spiral router bits Z=1

    Frsen mit integralem Schaft aus Metalllegierung(Z=1) /

    Application: For grooving, jointing,robbeting and plunge cuttingoperations on wood, wood compositesplastic materials, aluminium and such.

    Operatia: frezareMasina: CNCMaterial: lemn masiv, panouri furniruite, materiale plastice, aluminiu

    Verfahren: FrsenMaschine: CNCMaterial: Massives Holz, furnierte Platten

    Cod grup / FK5 01Gruppenkode / Groupe Code

    V. FR

    EZE

    CU CO

    AD

    /

    FRS

    EN

    MIT

    SC

    HA

    FT / R

    OUT

    ER B

    ITS

    V. Freze cu coad / Frsen mit Schaft / Router bits

    48

    Cod Scul D OR CMS

    L l d

    3 50 11 3 20FK501OR3.50 20FK501CM3.504 50 13 4 20FK501OR4.50 20FK501CM4.505 50 15 5 20FK501OR5.50 20FK501CM5.506 50 15 6 20FK501OR6.50 20FK501CM6.506 60 25 6 20FK501OR6.60 20FK501CM6.608 60 20 8 20FK501OR8.60 20FK501CM8.608 60 27 8 20FK501OR8.60 20FK501CM8.6010 70 25 10 20FK501OR10.70 20FK501CM10.7010 75 32 10 20FK501OR10.75 20FK501


Recommended